Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250702708

Range of heat interface units providing heating and instantaneous hot water. The central heating and hot water is generated via plate heat exchangers. The central heating circuit contains a pressure relief valve (3.0 bar) and an expansion vessel. Max Temperature & Pressure: Primary Circuit: 6.0 bar at 90°C DHW Circuit: 10.0 bar at 55°C Secondary Circuit 6.0 bar at 90°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/4" BSP (F) captive nut connections
Marking:: Baxi on front cover, Baxi, product info on label on front cover
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: A/7892284 AquaHeat HD/HWI 12/50 with Heat Meter & Mercurius B/7892283 AquaHeat HD/HWI 12/50

Manufacturer:: Baxi Heating UK Limited

Company Name
Baxi Heating UK Limited
Address
Brooks House, Coventry Road, Warwick
Postcode
CV34 3LL

View All Listings by this Company

WRAS Approval Number: #250688003

Range of threaded copper pipe elbow tap unions. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 250688003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Water works on adhesive label.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 100733 - 14mm x 1/2" BSP captive nut 100775 - 14mm x 1/2" BSP captive nut 100734 - 18mm x 3/4" BSP captive nut 100776 - 18mm x 3/4" BSP captive nut

Approval Holder:: Waterworks Ltd

Company Name
Waterworks Ltd
Address
60 Backus Ave. Danbury
Postcode
CT06810
Country
United States
Phone
2035466207
General Email
mary.kimlinger@waterworks.com

View All Listings by this Company

WRAS Approval Number: #250302723

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The DPV(M/S) models and DPV(S) models can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: DPV models 10.0 bar, DPVM models with an oval flange or VME models with integral check valve 16.0 bar, All other DPVM models 25.0 bar. DPV(S) models with an oval flange or DPV(S)(E) models with integral check valve 16.0 bar, All other DPV(S) models and DPH(S)I models 25.0 bar. Maximum operating temperatures: DPHM, DPVE and DPVME models with integral check valve 60°C, all other model variants 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250302723
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DPHM 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. DPV(M/S)(F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. DPV(S) (F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. DPV(S)F 25/40/60/85/125 B: Round flange: DN65, DN80, DN100, DN125. DPH(S)I 2/4/6 B: 1¼” BSP or NPT (F). DPH(S)I 10/15 B/C: 2” BSP or NPT (F).
Marking:: DPVF & logo, model name, PN, WRAS and technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: DPHM x yy B. Where: x = flow rate m³/h (2, 4 or 6). yy = no. of stages ranges 1-6 stages. ------------------------------------- DPV(M/S)(F/E/V/T) x yy B/C Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages DPV(M/S)(F/E/V/T)……2 B 1-30 stages. DPV(M/S)(F/E/V/T)……4/6 B 1-26 stages. DPV(S)(F/E/V/T)……10 B 1-21 stages. DPV(S)(F/E/V/T)……15 B/C 1-17 stages. -------------------------------------- DPV(S) F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90(model 85) or 125). yy = no. of stages ……25 B 1-12 stages. ……40/60 B 1-10 stages. ……85 B 1-6 stages. ……125 B 1-4 stages. -------------------------------------- DPHI x yy = Vertically oriented (AISI 304). DPHSI x yy = Vertically oriented (AISI 316). Where: I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages DPH(S)I 2/4/6 B 1-14 stages. DPH(S)I 10 B/15 B/15 C 1-8 stages.

Approval Holder:: Duijvelaar Pompen B.V.

Company Name
Duijvelaar Pompen B.V.
Address
Kalkovenweg 13 2401 LJ Alpen aan den Rijn
Country
Netherlands
Phone
0031 0172 488388

View All Listings by this Company

WRAS Approval Number: #250702721

Range of pumps with plastic bodies, plastic impellors and either ceramic (CE suffix models) or graphite (GR suffix models) sleeves. Maximum working pressure 7.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702721
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 18.74 x 12.8mm straight tube.
Marking:: Changsha Fuchuan Pump Industry Co., Ltd.logo, model number and other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Model:: BL-60-ST-2W-CE, BL-60-ST-3W-CE, BL-60-ST-2W-GR, BL-60-ST-3W-GR.

Approval Holder:: Changsha Fuchuan Pump Industry Co., Ltd

Company Name
Changsha Fuchuan Pump Industry Co., Ltd
Address
Room 501, Building A, No.21 Liujiaoting Road (South Gate), No.145 South Section of Dongshiyi Road (West Gate), Langli Street, Changsha County, Hunan Province
Country
China

View All Listings by this Company
Manufacturer:: Changsha Fuchuan Pump Industry Co., Ltd

Company Name
Changsha Fuchuan Pump Industry Co., Ltd
Address
Room 501, Building A, No.21 Liujiaoting Road (South Gate), No.145 South Section of Dongshiyi Road (West Gate), Langli Street, Changsha County, Hunan Province
Country
China

View All Listings by this Company

WRAS Approval Number: #250702722

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company