Directory Search Results

Print List

#2211001

Range of concealed, thermostatic blending valves with a brass body. The temperature is controlled via a thermostatic cartridge with a dome operating member which incorporates a manual override, and flow is controlled via a push on/off headwork to a single or optional shower outlet, depending on model. The inlet connections incorporate single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2211001
Size:
3/4" BSP (F)
Marking:
Hansgrohe on front plate, Hansgrohe cast onto concealed body Model 15 763 000: AXOR on faceplate.
Installation Requirements:
R001 R040
Expiry date:
30/11/2027
Model:
15 735 400 Hansgrohe ShowerSelect Glass Thermostat HighFlow for concealed installation for 1 function and additional outlet 15 735 600 Hansgrohe ShowerSelect Glass Thermostat HighFlow for concealed installation for 1 function and additional outlet 15 742 xxx Hansgrohe ShowerSelect S Thermostat HighFlow for concealed installation for 1 function and additional outlet 15 761 xxx Hansgrohe ShowerSelect Thermostat HighFlow for concealed installation for 1 function and additional outlet 36 706 xxx AXOR ShowerSelect Thermostat HighFlow for concealed installation softcube for 1 function and additional outlet 36 716 xxx AXOR ShowerSelect Thermostat HighFlow for concealed installation square for 1 function and additional outlet 36 726 xxx AXOR ShowerSelect Thermostat HighFlow for concealed installation round for 1 function and additional outlet 15 738 400 Hansgrohe ShowerSelect Glass Thermostat for concealed installation for 2 functions 15 738 600 Hansgrohe ShowerSelect Glass Thermostat for concealedinstallation for 2 functions 15 743 xxx Hansgrohe ShowerSelect S Thermostat for concealed installation for 2 functions 15 763 xxx Hansgrohe ShowerSelect Thermostat for concealed installation for 2 functions 15 737 400 Hansgrohe ShowerSelect Glass Thermostat for concealed installation for 1 function 15 737 600 Hansgrohe ShowerSelect Glass Thermostat for concealed installation for 1 function 15 744 xxx Hansgrohe ShowerSelect S Thermostat for concealed installation for 1 function 15 762 xxx Hansgrohe ShowerSelect Thermostat for concealed installation for 1 function 36 705 xxx AXOR ShowerSelect Thermostat for concealed installation softcube for 1 function 36 714 xxx AXOR ShowerSelect Thermostat for concealed installation square for 1 function 36 722 xxx AXOR ShowerSelect Thermostat for concealed installation round for1 function 01 810 180 Hansgrohe Basic set iBox universal with pre-mounted angle connection G1/2 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Models added November 2024: 36 707 xx0 - AXOR ShowerSolutions - Thermostat for concealed installation softsquare for 2 functions. 36 715 xx0 - AXOR ShowerSolutions - Thermostat for concealed installation square for 2 functions. 36 723 xx0 - AXOR ShowerSolutions - Thermostat for concealed installation round for 2 functions. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Products to be installed together with 01 700 180 AXOR iBox universal Basic set.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2211909

Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The valves are supplied with a variety of shower kits that consist of shower hoses, shower handsets and riser rail assemblies. Model is supplied with a flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2211909
Size:
3/4" BSP (F) or 15MM Compression
Marking:
Valves 269922BV & XMCTBV DTC 64 on rear body. Valve CTBV02BK Methven & DCT64 on body. Handsets Methven or Deva Hoses DTC 15, WRAS, Year of manufacture on conical nut.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
COMBMEF COMBMEF/HSR8 KESBS IHKESCTS KESCTS MCTS AOCTSCPUK AOCTSEFCP KCTS KCTSMH KHCTSEFCP KLFCTS KLFCTSEFCP KRCTSEFCP KRLFCTSEFLP KRCTSEFBK VISBS MCTS MH WISBS Model added March 2026 KRCTSEFBB

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2207388

Piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Cold water use only.

Section:
2120 Valves
Section Subtitle:
Float operated, piston type.
WRAS Approval Number:
2207388
Note:
For use with floats complying with BS 2456, not supplied. All models, except 20.10102.G15.CP5R-8510, 20.10192.G15.CP5R-8510, 20.10112.G15.CP5R-8510, 20.10182.G20.CP5R-8510 are marked with BS1212/1.
Size:
½”, ¾” or 1” BSP(M)
Marking:
WESTCO, WRAS, date of manufacture MM/YY on body.
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
UW22010 1/2" PT1 Float Ball Valve LP 8 bar

Approval Holder:
Standard Hidráulica, S.A.U
Company Name
Standard Hidráulica, S.A.U
Address
Avenida de la Ferreria 73 Montcada i Reixac
Postcode
08110
Country
Spain
General Email
Jorge.casado@sth.email

View All Listings by this Company

Print This Approval


#2301707

Range of spring-loaded resilient trim, non-return valves with blue epoxy coated ductile iron bodies, stainless steel discs and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.
WRAS Approval Number:
2301707
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.
Marking:
BOSS & technical information on data plate on body. DN & Flow arrow on body
Installation Requirements:
R001
Expiry date:
31/01/2028
Model:
23210209, 23210220, 23210231, 23210242, 23210253, 23210264, 23210275, 3210286 & 23210297 BOSS 10XS DUAL PLATE NON RETURN VALVES

Approval Holder:
BSS Industrial
Company Name
BSS Industrial
Address
Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2212800

Range of in-line adjustable pressure reducing valves with DZR brass bodies and NBR ‘O’-rings. The valve incorporates a test port. The outlet pressures range from 1.5 bar to 6.0 bar. Maximum supply pressure 25.0 bar. Cold water use only.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2212800
Size:
½”, ¾”, 1”, 1¼”, 1½”, 2” BSP (M) inlet/outlet
Marking:
QR code Resideo (brand of Pittway Sarl), Braukmann & Model No., DN, DR, Made in (Germany), date of manufacture (YYWW) on data label on body. QR code, Braukmann & Model No. and WRAS on second data label on body.
Installation Requirements:
R001 R120
Expiry date:
31/12/2027
Model:
D06F-1/2BGB, D06F-3/4BGB, D06F-1BGB, D06F-11/4BGB, D06F-11/2BGB, D06F-2BGB.

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#2204713

Range of adjustable, bronze in-line pressure reducing valves. Sizes ½”, ¾” 1”& 1¼” have inspection ports on the outlet only and Sizes 2” & 4” have inspection ports on the inlet and outlet. The valves incorporate a stainless-steel strainer. Maximum inlet supply pressure 20.0 bar. Maximum outlet pressure 1.0 bar to 4.0 bar. Maximum operating temperature 70°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2204713
Size:
Please refer to model.
Marking:
Gala, WRAS, flow arrow, size & PN on body.
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
1520 Ranges of PRESSURE REDUCING VALVES ½”, ¾” and 1” 1¼”, 1½”, 2”, 2½”, 3” and 4”.

Approval Holder:
Tianjin Galaxy Valve Co. Ltd.
Company Name
Tianjin Galaxy Valve Co. Ltd.
Address
No. 49, Guanghui Road, Beizhakou Town, Jinnan District, Tianjin 300350
Country
China

View All Listings by this Company

Print This Approval


#2209066

Range of pressure reducing valves with DZR brass, gunmetal or stainless-steel bodies. Maximum inlet pressure for HP and SP Models = 25.0 bar. Maximum inlet pressure for LP Models = 6.0 bar. Maximum operating temperature 60°C

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2209066
Note:
IRN R008 applies only to model with the clear cap.
Size:
½” BSP M to 2” BSP M inlet/outlet
Marking:
BWT ON OPERATING MEMBER FLOW ARROW ON BODY
Installation Requirements:
R001 R008
Expiry date:
30/09/2027
Model:
BWT RED GUNMETAL BWT INOX STAINLESS STEEL BWT ECO DZR BRASS YY: outlet pressure range; LP (0.5-3 bar), SP (1.5-7 bar), or HP (3-12 bar) XX: Size (DN); 15, 20, 25, 32, 40, or 50 – (9060 DZR-brass only available in 15, 20, 25) ZZ: Pressure/Temperature; 16 (16 bar max inlet pressure, for cold water only), 25 (25 bar max inlet pressure, for warm water at 60°C) in case of YY=LP the maximum inlet pressure is limited to max 6 bar

Approval Holder:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company

Print This Approval


#2210359

Bistable (latching - pulse controlled) or monostable (normally open) solenoid valve with a plastic body, EPDM diaphragm and ‘O’-rings. The products incorporates a stainless-steel filer on the inlet. From February 2024 the product may also be supplied with a plastic filter. Maximum working pressure 10.0 bar. Maximum operating temperature: Between October 2022 and January 2024 this product is suitable for hot water use only (70°C). From February 2024 to the end of October 2027 this product is suitable up to 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2210359
Size:
M28x1, M29x1,5. Models added January 2025: 3/8” BSP (M), ½” BSP (M) & ¾” BSP (M)
Marking:
A.u.K. Müller, pressure range, type (M - monostable, B - Bistable), indent code, model no., voltage and date of production (WW/YY) on adhesive label on body. M28 size models also include DN size: DN7.
Installation Requirements:
R001 R008
Expiry date:
31/10/2027
Model:
50.007.101. Models added January 2025: 50.007.126.

Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval


#2207380

Range of spherical valves with brass (K65281, K65282, K65283, K65301, K65302, K65303, K65291, K65292, K65293, K65311, K65312 & K65313) or DZR brass (K64783, K64784, K64793, K64794, K64763, K64764, K64773, K64774) bodies (chrome plated, nickel plated or without plating - see model), chrome plated brass ball and a range of different operating members (see model). Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2207380
Size:
See model.
Marking:
JET RANGE, DN, PN, CN, & CR ON BODY.
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
K64783, K64784, K64763 and K64764 with or without chrome plating - lever operated DN8: 10mm compression x 10mm compression, DN8: 12mm compression x 10mm compression, DN8: 12mm compression x 12mm compression, DN10: 15mm compression x 12mm compression, DN10: 15mm compression x 15mm compression, DN15R: 22mm compression x 22mm compression. K64793, K64794, K64773 and K64774 with or without chrome plating - lever operated DN8: 10mm compression x 10mm compression, DN8: 12mm compression x 10mm compression, DN8: 12mm compression x 12mm compression, DN10: 15mm compression x 12mm compression, DN10: 15mm compression x 15mm compression, DN15R: 22mm compression x 22mm compression. K65301, K65302 and K65303 with or without chrome plating - butterfly handle DN8: ¼" BSP (F) x ¼" BSP (F), DN8: ⅜" BSP (F) x ⅜" BSP (F), DN10: ½" BSP (F) x ½" BSP (F). K65281, K65282 and K65283 with or without chrome plating - lever operated): DN8: ¼" BSP (F) x ¼" BSP (F), DN8: ⅜" BSP (F) x ⅜" BSP (F), DN10: ½" BSP (F) x ½" BSP (F). K65311, K65312 and K65313 with or without chrome plating - butterfly handle DN8: ¼" BSP (M) x ¼" BSP (F), DN8: ⅜" BSP (M) x ⅜" BSP (F), DN10: ½" BSP (M) x ½" BSP (F). K65291, K65292 and K65293 with or without chrome plating - lever operated DN8: ¼" BSP (M) x ¼" BSP (F), DN8: ⅜" BSP (M) x ⅜" BSP (F), DN10: ½" BSP (M) x ½" BSP (F).

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2210353

Range of spherical valves with various operating members, brass bodies, brass balls, FKM ‘O’-rings or EPDM ‘O’-rings (S84W series only) and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2210353
Size:
See models.
Marking:
Rub logo, size, DN, PN, casting date (YYWW) and serial number on body.
Installation Requirements:
R001
Expiry date:
31/10/2027
Model:
SERIES S84: S84xyyz. Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF , long lever, 06 = BSPP FxF, T-handle, 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever, 26 = BSPP MxF, T-handle, 25 = BSPP MxF, lockable handle (light-blue), T0 = BSPP FxF, stubby (short) lever, 08 = BSPT FxF, long lever (no markings on the lever), 50 = BSPT FxF, long lever, 56 = BSPT FxF, T-handle, 59 = BSPT FxF, lockable handle (light-blue), 52 = BSPT MxF, long lever, 57 = BSPT MxF, T-handle, 55 = BSPT MxF, lockable handle (light-blue). z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, KA = customised laser marking on red handle, L = customised laser marking on blue handle, R = red handle colour. SERIES S84W: S84xyyWz. Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF , long lever (green), 06 = BSPP FxF, T-handle (green), 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever (green), 26 = BSPP MxF, T-handle (green), 25 = BSPP MxF, lockable handle (light-blue), z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, M = return spring lever, R = red handle colour, UP = customised laser marking on handle. SERIES S90: S90xyyz Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF, long lever (red), 16 = BSPP FxF, T-handle (red), 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever (red), 26 = BSPP MxF, T-handle (red), 25 = BSPP MxF, lockable handle (light-blue), 22 = BSPP MxM, long lever (red), 27 = BSPP MxM, T-handle (red), 29 = BSPP MxM, lockable handle (light-blue). z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, L = customised laser marking on handle, P = customised laser marking on handle. SERIES S64: S64xyy(y)(y) Where: x = size: D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy(y)(y) = thread type, unplated and low torque: 00 = BSPP FxF thread with brass trim (stem & ball), 00G = same as 00, but body and end-cap are in brass unplated (instead of nickel plated), 05 = BSPP FxF thread with brass trim (stem & ball), 00A = BSPP FxF thread with brass trim (stem & ball), low torque (sizes 1” through 2” only), 00AG = same as 00A, but body and end-cap are in brass unplated (instead of nickel plated).

Approval Holder:
BONOMI Industries srl
Company Name
BONOMI Industries srl
Address
Via Padana Superiore, 29 Mazzano (BS)
Postcode
25080
Country
Italy
Phone
+39 030 21 244 241
General Email
info@rubvalves.com

View All Listings by this Company
Manufacturer:
BONOMI Industries srl
Company Name
BONOMI Industries srl
Address
Via Padana Superiore, 29 Mazzano (BS)
Postcode
25080
Country
Italy
Phone
+39 030 21 244 241
General Email
info@rubvalves.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 162 of 652

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.