'Therma-Light Touch Up Paint'. Site applied, black coloured coating. Apply as per manufacturer's TDS 'TDS/CLP-L 44', dated '28/2/2024'. Cure for 7 days@22°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240455009

Expiry date:

30/04/2029

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

enquiries@cranefs.com

View All Listings by this Company

‘Sikagard®-1814 - RAL 7035’. Site applied, grey coloured (once mixed), two-component epoxy polysulfide resin coating. Mix Part A (light grey, opaque liquid) and Part B (light yellow, translucent liquid) in a 78:22 weight ratio and apply 2 coats as per manufacturer’s TDS ‘MBS_CC-UAE/Pr_1814_06_23/v1/01_24’. Cure coat 1 for 9 hours@25°C. Cure coat 2 for 14 days@25°C. For use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2307541

Expiry date:

31/07/2028

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

‘Sika Monotop 1010’ primer for use with ‘Sika Monotop 4012’ cement mortar. Site applied, grey coloured cementitious, polymer modified coating material used as bonding primer and cementitious, fibre reinforced, low shrinkage repair mortar. First coat: Mix 25kg ‘Sika Monotop 1010’ with 5.25 litres of water and apply as per manufacturer’s ‘Sika Monotop 4012' IFU issue no. ‘001’ dated ‘July 2022’. Second coat: Mix 25kg ‘Sika Monotop 4012’ with 3.8 litres of water and apply immediately to the first coat as per manufacturer’s IFU issue no. ‘001’ dated ‘July 2022’. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5063 Concrete, Cement and Mortar

Section Subtitle:

Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

WRAS Approval Number:

2305560

Expiry date:

31/05/2028

Approval Holder:

Sika Ltd.

Company Name

Sika Ltd.

Address

Watchmead, Welwyn Garden City, Hertfordshire

Postcode

AL7 1BQ

Country

United Kingdom

Phone

01707 394444

General Email

sales@uk.sika.com

View All Listings by this Company

'DIMERSIL 20'. Blue coloured, compressed fibre gasket material, manufactured by calendaring. For use with water 85°C.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

240355042

Expiry date:

31/03/2029

Approval Holder:

Dimer d.o.o.

Company Name

Dimer d.o.o.

Address

Cesta Toneta Kralja 10, 1290 Grosuplje

Country

Slovenia

View All Listings by this Company

'CF 1100'. Blue coloured, compressed fibre gasket material, manufactured by calendaring. For use with water 85°C.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

240355043

Expiry date:

31/03/2029

Approval Holder:

CF Service S.r.l.

Company Name

CF Service S.r.l.

Address

Via del Vetro 13/15, 300 20 Marcon (VE)

Country

Italy

View All Listings by this Company