‘CFxx and TFxx’ range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: CF15 and CF16 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250415018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

CF19, TF09 and CF26 models: Valtech on body. All other models: Valtech on compression nut.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

CF01 - Straight Coupler CxC: ½", ¾", 1", 1¼", 1½", 2". CF03 - Straight Coupler CxC: ¾"*½", 1"*½", 1"*¾", 1¼"*¾", 1¼"*1", ½"*10mm, ½"*12mm, ½"*15mm, ¾"*22mm. CF01L - Repair Coupling CXC: ½"*½", ¾"*¾". CF07 - Straight Coupler M.I. X C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1"*1¼", 1¼"*1", 1½"*1¼", 2"*1½". CF05 - Straight Coupler F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", 1"*¾", ¾"*1", 1¼"*1", 1“*1¼", 2“*1½". CF15 - Swivel Coupler F.I. x C: ½", ¾". CF02 - Elbow C x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*15mm, ¾"*22mm. CF08 - Elbow M.I. x C: ½", ¾", 1", 1¼", 1½", 2", ¾"*½", 1"*¾", ½"*¾", ¾"*1". CF06 - Elbow F.I. x C: ½", ¾", 1", 1¼", 1½", 2", ½"*¾", ¾"*½", ¾"*1", 1"*¾". CF10 - Wallplate Elbow F.I. x C: ½"*½", ¾"*¾", ½"*¾". CF11 - Equal Tees CxCxC: ½", ¾", 1", 1¼", 1½", 2". CF12 - Reducing Tee C x C x C: ½"*½"*¾", ¾"*¾"*½", ¾"*¾"*1", 1"*1"*½", 1"*1"*¾", 1¼"*1¼"*½", 1¼"*1¼"*¾", 1¼"*1¼"*1", 1½"*1½"*¾", 1½"*1½"*1", 1½"*1½"*1¼", ¾"*½"*¾", 1"*½"*1", 1"*½"*¾", 1"*¾"*1", ¾"*½"*½", 1"*¾"*¾", 1"*¾"*½", 1"*½"*½", 10mm*10mm*½", ½"*10mm*10mm, ½"*10mm*½", ½"*½"*10mm. CF24 - Cross CxCxCxC: ½", ¾", ¾"*½"*½"*½". CF16 - Swivel Elbow F.I. x C: ½", ¾". CF13 - Tee CxCxF.I.: ½", ¾", 1", ¾"*¾"*½", 1"*1"*½", 1"*1"*¾". CF19 - Reducing Set: ¾"*½", 1"*½", 1"*¾", 1¼"*½", 1¼"*¾", 1¼"*1", 1½"*½", 1½"*¾", 1½"*1", 1½"*1¼", 2"*½", 2"*¾", 2"*1", 2"*1¼", 2"*1½". CF17 - Flanged Tank Connector with Backnut: ½", ¾", 1", 1¼", 1½", 2". CF14 - Stop End: ½", ¾", 1", 1¼", 1½", 2". TF09 - Blank Cap and Washers: ½", ¾", 1", 1¼", 1½", 2". TF26 - Coupling Nut: ½", ¾", 1", 1¼", 1½", 2". CF26 - Compression Ring: ½", ¾", 1", 1¼", 1½", 2". Where M.I. = BSP (M) and F.I. = BSP (F).

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

‘Universal Transition Coupling (UTC)’ range of plastic compression fittings for use with the following pipe types and sizes: Stainless steel (manufactured to ASTM A554/ BS EN 10312): ¾”, 1” & 1¼”. Galvanised (EN 10255): ¾”, 1”, 1¼”, 1½” & 2”. Copper (BS EN 1057): 15mm, 22mm & 28mm. PVC (BS EN 1452): 20mm & 2”. ABS (BS 5391-1): 20mm, 25mm & 32mm. PE80 & PE100 pipe (to BS EN 12201): 20mm, 25mm, 32mm, 50mm & 63mm. For use above and below ground. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Philmac, Universal Transition Fitting, size & date of manufacture (M/YY) on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

87113300 UTC Joiner 15-21mm x 15-21mm 87114300 UTC Joiner 21-27mm x 15-21mm 87114400 UTC Joiner 21-27mm x 21-27mm 87115300 UTC Joiner 27-34mm x 15-21mm 87115400 UTC Joiner 27-34mm x 21-27mm 87115500 UTC Joiner 27-34mm x 27-34mm 87116500 UTC Joiner 39-43mm x 27-34mm 87116600 UTC Joiner 39-43mm x 39-43mm 87117700 UTC Joiner 34-39mm x 34-39mm 87118800 UTC Joiner 47-49mm x 47-49mm 87119900 UTC Joiner 59-61mm x 59-61mm 87123100 UTC End Connector MI BSP 15-21mm x ½" 87123200 UTC End Connector MI BSP 15-21mm x ¾" 87123300 UTC End Connector MI BSP 15-21mm x 1" 87124200 UTC End Connector MI BSP 21-27mm x ¾" 87124300 UTC End Connector MI BSP 21-27mm x 1" 87124400 UTC End Connector MI BSP 21-27mm x 1¼" 87125200 UTC End Connector MI BSP 27-34mm x ¾" 87125300 UTC End Connector MI BSP 27-34mm x 1" 87125400 UTC End Connector MI BSP 27-34mm x 1¼" 87125500 UTC End Connector MI BSP 27-34mm x 1½" 87133300 UTC Tee 15-21mm 88103200 UTC x 3G Metric/Imperial Joiner 15-21 x 20/½" 88103300 UTC x 3G Metric/Imperial Joiner 15-21 x 25/¾" 88104200 UTC x 3G Metric/Imperial Joiner 21-27 x 20/½" 88104300 UTC x 3G Metric/Imperial Joiner 21-27 x 25/¾" 88105200 UTC x 3G Metric/Imperial Joiner 27-34 x 20/½" 88105300 UTC x 3G Metric/Imperial Joiner 27-34 x 25/¾" 88105400 UTC x 3G Metric/Imperial Joiner 27-34 x 32/1" 88106400 UTC x 3G Metric/Imperial Joiner 39-43 x 32/1" 88107400 UTC x 3G Metric/Imperial Joiner 34-39 x 32/1" 88108600 UTC x 3G Metric/Imperial Joiner 47-49 x 50/1½" 88108700 UTC x 3G Metric/Imperial Joiner 47-49 x 63/2" 88109700 UTC x 3G Metric/Imperial Joiner 59-61 x 63/2" 88153300 UTC x 3G Metric/Imperial Elbow 15-21 x 25/¾" 88154300 UTC x 3G Metric/Imperial Elbow 21-27 x 25/¾" 88154400 UTC x 3G Metric/Imperial Elbow 21-27 x 32/1" 88155300 UTC x 3G Metric/Imperial Elbow 27-34 x 25/¾" 88165300 UTC x 3G Metric/Imperial Elbow 27-34 x 32/1"

Manufacturer:

Philmac Pty Ltd.

Company Name

Philmac Pty Ltd.

Address

47-59 Deeds Road, North Plympton, SA 5037

Country

Australia

View All Listings by this Company

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250804703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.22x¾B 6243GM.28x1B 6243GM.28x¾B 6243GM.35x 1¼B. 6243GM.35x1B 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm – 22mm.

Marking:

TLC Logo and size on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Flomasta Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250302053

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to models

Marking:

TLC logo and size on body. Size and PN on plastic nut.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Flomasta Range of plastic push-fit fittings SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

1 Paddington Square, London

Postcode

W2 1GG

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company