Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103349

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of air venting valves with a stainless-steel bodies and springs, plastic float and EPDM ‘O’-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 80.0°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

240602047

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

CLA-VAL logo, DN, PFA, serial number and model number on data plate

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

VENT-A-RISER NUVENT AQUA B70-526 DN25 - 1” BSP (M), NUVENT AQUA 70-516 DN50 - 2” BSP (M), NUVENT AQUA 70-516 DN80 - flanged, NUVENT AQUA 70-516 DN100 - flanged, NUVENT AQUA 70-516 DN150 - flanged & NUVENT AQUA 70-516 DN200 - flanged

Product Images

Approval Holder:

Cla-Val UK Ltd.

Company Name

Cla-Val UK Ltd.

Address

Dainton House 107 Goods Station Road Tunbridge Wells

Postcode

TN1 2DR

Country

United Kingdom

Phone

01892 514400

General Email

liam.kent@cla-val.co.uk

View All Listings by this Company

Range of air release valves with plastic bodies, EPDM ‘O’ rings and polypropylene floats. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

241204001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Bermad on body. Size, model, PN, DN, date of manufacture (MM/YYYY) on adhesive label on body.

Installation Requirements:

R001 R535

Expiry date:

31/12/2029

Model:

A30-3/4”: ¾” BSP (M). A30-1”: 1” BSP (M). C30-3/4”: ¾” BSP (M). C30-1”: 1” BSP (M). C30-2”: 2” BSP (M).

Approval Holder:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Manufacturer:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

240602019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Specifically for use with Hansgrohe iBox (01 800 180, 01 700 180 or 01 810 180) which has ¾” BSP (F) inlets

Marking:

Axor logo on face plate

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). 38 626 xx0 Axor Uno (single lever operating member) 45 605 xx0 Axor Uno (single lever operating member) 72 605 xx0 Hansgrohe Talis S (single lever operating member) 71 667 xx0 Hansgrohe Vernis Blend (single lever operating member) 71 668 xx0 Hansgrohe Vernic Shape (single lever operating member) Model added July 2024: 74 616 xx0 Where xxx and xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

T type thermostatic blending valve with a brushed chrome plated brass body. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240602012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (M)

Marking:

Reliance Water Controls & Heatguard on cap. Date of Manufacture (DDWWYLL - LL is the production line) and flow arrow on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2029

Model:

Heat110020 Heatguard TMV2 base valve

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company