‘F17’ range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Unequal Elbows: 20mmx16mm - 32mmx25mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Male tee: 16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F), Demountable female straight union: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), End cap: 16mm - 32mm.

Marking:

RIFENG, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Equal Straight Union (16mm - 32mm): F17-S1216x1216, F17-S1620x1620, F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union (20mmx16mm - 32mmx26mm): F17-S1620x1216, F17-S2025x1216, F17-S2025x1620, F17-S2026x1216, F17-S2026x1620, F17-S2632x1216, F17-S2632x1620, F17-S2632x2025, F17-S2632x2026. Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-S1216x3/8, F17-S1216x1/2, F17-S1216x3/4, F17-S1620x1/2, F17-S1620x3/4, F17-S1620x1, F17-S2025x3/4, F17-S2025x1, F17-S2026x3/4, F17-S2026x1, F17-S2632x1. Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F, F17-S1216x1/2F, F17-S1216x3/4F, F17-S1620x1/2F, F17-S1620x3/4F, F17-S1620x1F, F17-S2025x3/4F, F17-S2025x1F, F17-S2026x3/4F, F17-S2026x1F, F17-S2632x1F. Equal Elbows (16mm - 32mm): F17-L1216x1216, F17-L1620x1620, F17-L2025x2025, F17-L2026x2026, F17-L2632x2632. Unequal Elbows (20mmx16mm - 32mmx25mm): F17-L1620*1216, F17-L2025*1216, F17-L2025*1620, F17-L2632*2025. Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-L1216x3/8, F17-L1216x1/2, F17-L1216x3/4, F17-L1620x1/2, F17-L1620x3/4, F17-L1620x1, F17-L2025x3/4, F17-L2025x1, F17-L2026x3/4, F17-L2026x1, F17-L2632x1. Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-L1216x3/8F, F17-L1216x1/2F, F17-L1216x3/4F, F17-L1620x1/2F, F17-L1620x3/4F, F17-L2025x3/4F, F17-L2026x3/4F, F17-L2025x1F, F17-L2632x1F. Equal Tees (16mm - 32mm): F17-T1216x1216x1216, F17-T1620x1620x1620, F17-T2025x2025x2025, F17-T2026x2026x2026, F17-T2632x2632x2632. Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): F17-T1216x1620x1216, F17-T1216x2025x1216, F17-T1620x1216x1216, F17-T2025x1216x1216, F17-T2026x1216x1216, F17-T2026x1216x1620, F17-T1620x1216x1620, F17-T1620x1620x1216, F17-T1620x2025x1620, F17-T1620x2026x1620, F17-T2025x1216x2025, F17-T2025x1620x1620, F17-T2025x2025x1620, F17-T2025x1620x2025, F17-T2026x1216x2026, F17-T2026x1620x1620, F17-T2026x1620x2026, F17-T2026x2026x1620, F17-T2632x1216x2632, F17-T2632x1620x2632, F17-T2632x2026x2026, F17-T2632x2025x2632, F17-T2632x2026x2632. Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): F17-T1216x3/8Fx1216, F17-T1216x1/2Fx1216, F17-T1620x1/2Fx1620, F17-T1620x3/4Fx1620, F17-T2025x1/2Fx2025, F17-T2025x3/4Fx2025, F17-T2026x1/2Fx2026, F17-T2026x3/4Fx2026, F17-T2632x3/4Fx2632, F17-T2632x1Fx2632. Male tee (16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M)): F17-T1216x3/8x1216, F17-T1216x1/2x1216, F17-T1620x1/2x1620, F17-T1620x3/4x1620, F17-T2025x1/2x2025, F17-T2025x3/4x2025. Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): F17-L1216x3/8F (Z), F17-L1216x1/2F (Z), F17-L1620x1/2F (Z), F17-L1620x3/4F (Z), F17-L2025x3/4F (Z), F17-L2026x3/4F (Z). Demountable female straight union (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F (H), F17-S1216x1/2F (H), F17-S1216x3/4F (H), F17-S1620x1/2F (H), F17-S1620x3/4F (H), F17-S2025x3/4F (H), F17-S2026x3/4F (H), F17-S2632x1F (H). End cap (16mm - 32mm): F17-D1216, F17-D1620, F17-D2025, F17-D2026, F17-D2632.

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Manufacturer:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

5000 series of copper end feed fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

5001A 90° Street bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5002G 90° Bent tap Connector 15mm x ½”, 15mm x ¾”, 22mm x ¾” 5002A 90° Bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5040 45° Street Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5041 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5085 Full Crossover 15mm, 22mm 5086 Partial Crossover 15mm, 22mm 5090 90° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5090R 90° Elbow 22mm x 15mm 5092 90° Street Elbow 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5130 Equal Tee 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5301 End Cap 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5130R Reducing Tee 15mmx22mmx15mm，22mmx15mmx15mm， 22mmx15mmx22mm，22mmx22mmx15mm， 22mmx28mmx22mm，28mmx15mmx15mm， 28mmx15mmx28mm，28mmx22mmx22mm， 28mmx22mmx28mm，28mmx28mmx15mm， 28mmx28mmx22mm，35mmx15mmx35mm， 35mmx22mmx35mm，35mmx28mmx28mm， 35mmx28mmx35mm，42mmx15mmx42mm， 42mmx22mmx42mm，42mmx28mmx42mm， 42mmx35mmx42mm，54mmx15mmx54mm， 54mmx22mmx54mm，54mmx28mmx54mm， 54mmx35mmx54mm，54mmx42mmx54mm 5240 Reducing Coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5421 Metric imperial Coupling 15mm x ½”, 22mm x ¾” 5270 Straight Coupling 15mm， 22mm， 28mm, 35mm, 42mm, 54mm 5243 Fitting reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5359G Straight Tap Connector 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang

Country

China

View All Listings by this Company

Dual flush, WC outlet valves for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A2415L, A2415M & A2706

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Stainless steel plate heat exchangers with copper brazing.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

0.75 to 2”.

Marking:

UK Exchangers and product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

UKE-BR030 UKE-BR040 UKE-BR060H UKE-BR050 UKE-BR050R UKE-BR095H BR200L UKE-BR200M UKE-BR205 UKE-BRX12B

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company

Range of pre-assembled hydraulic blocks incorporating plate heat exchangers, pressure relief valves set at 3.0 bar, circulation pumps and flow regulators. Maximum working pressure: Primary 2.5bar & secondary 10 bar. Maximum operating temperature 80°C (CH) & 60°C (DHW).

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression.

Marking:

Bosch, model code and other technical information on adhesive label on assembly.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

8-718-684-683.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Manufacturer:

Bosch Thermotechnik GmbH

Company Name

Bosch Thermotechnik GmbH

Address

Sophienstrasse 30 - 32 D-35576 Wetzlar Germany

View All Listings by this Company