Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240704011

Inlet hose consisting of a EPDM inner hose layer and corrugated outer cover. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact with water. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240704011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Any anti-flooding claims made by the manufacturer have not been verified by test and are covered by this approval).
Size:: ¾” BSP captive nut
Marking:: Wuxi Jinhua, Model, WRAS, date of manufacture (YYYY) etched on hose cover.
Installation Requirements:: R001 R150
Expiry date:: 31/07/2029
Model:: GJS-FL-115HW - Aquastop inlet hose.

Approval Holder:: Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name
Wuxi Jinhua Yiyuan Technology Co.,Ltd.
Address
No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province
Country
China

View All Listings by this Company
Manufacturer:: Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name
Wuxi Jinhua Yiyuan Technology Co.,Ltd.
Address
No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province
Country
China

View All Listings by this Company

WRAS Approval Number: #240902020

Range of TPE shower hoses (various finishes) with EPDM seals. Open outlet use only. Maximum operating temperature 60.0°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240902020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F) Captive nut
Marking:: Axor on nut
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 28 282 xx0 28 284 xx0 28 286 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #240402080

Range of stainless-steel interlocked shower hoses and shower hose extension pieces (smaller length versions) incorporating PE/EPDM and PEX inner tube materials. Available with various surface finishes and end connectors. For further details see model section. Maximum working pressure open outlet use. Maximum operating temperature 85.0°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240402080
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP captive nut. M15x1. All connection sizes can be used with every model of hose.
Marking:: IW, WRAS & year of manufacture (YYYY) on connector
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Model：IW-XXXXXXXX 1st X stands for out diameter: from 13mm to 17mm +/-0.3mm (PVC tube use size 14mm and 15mm) 2nd X stands for outer material: S=stainless steel, B=brass, P=PVC，(PVC outer tube only with PVC inside tube) 3rd X stands for the surface treatment: C=chrome plated, P=stainless steel natural color, B=black, S=sliver, G=Gold,/Gray 4th X stands for fittings material: B=brass, S=stainless steel, Z=Zinc Alloy P=ABS 5th X stands for fittings size and shape: 1/2’ 3/8’ M15x1, M16x1,(M15*1,M16*1 use brass material only use size 13mm and 14mm only) Fitting shape find the attached1. 6th X stands for hose nipple material: B=brass, S=stainless steel, P=POM, N=Nylon 7th X stands for inner tube material:, PVC, EPDM，PEX (EPDM,PEX, tube only use with stainless steel and brass out side) 8th X stands for hose length from 10cm to 300cm. 9th X stands for the fitting number end connection type), which can be a number from 1 to 29, or 51 to 72 with the prefix: Nut and suffix: #, (if different end connection types are used two numbers will be provided Size 1/2” 3/8” (only used for stainless steel outer material) Size M15*1 M16*1 ( use brass material only, use size 13mm and 14mm only) Limits: 1. Size 1/2”can use all fitting number except #51 2. Size 1/2” 3/8” can use #13 and #30， but they are only used for stainless steel outer material. 3. #30 is used for stainless steel outer material and surface treatment of stainless steel natural color Size M15*1 only use #51, M15*1,M16*1 use size 13mm and 14mm only 4. ABS is only used in fitting size of 1/2’ 5. Only 14mm diameter is used nipple materials of stainless steel，POM and Nylon；other diameter only used brass material 6. EPDM,TPE tube only use with stainless steel and brass out side Model code example: IW-17SCB1/2”1/2”SPEX150 Nut 4# & 16#. This gives a 17mm hose with stainless steel interlocked outer, chrome surface finish, brass fittings, ½” end connections at each end, stainless steel nipples, PEX hose inner, 150cm length, end connections type Nut number 4 and 16.

Approval Holder:: Innowin International Co., LTD

Company Name
Innowin International Co., LTD
Address
No.377 Sec 3 Chang Tsao Road
Country
Taiwan

View All Listings by this Company

WRAS Approval Number: #240202092

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240202092
Size:: See Models
Marking:: Brymec, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: DN10 30909 50cm length & 30925 30cm length - 15mm compression x 1/2"F captive nut 30911 50cm length & 30917 30cm length - 15mm compression x 3/4"F captive nut DN13 30904 50cm length & 30913 30cm length - 15mm compression x 1/2"F captive nut 30927 15mm compression x 3/4"F captive nut 30942 50cm length & 30928 30cm length - 22mm compression x 3/4"F captive nut 30903 DN19 22mm compression x 3/4"F captive nut DN10 30924 - 15mm isolating valve x 1/2"F captive nut DN13 30921- 22mm isolating valve x 3/4"F captive nut 30934 50cm length & 30926 30cm length - 15mm compression x 15mm compression DN13 30945 50cm length & 30932 30cm length- 22mm compression x 22mm compression

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #240502056

Range of stainless-steel braided EPDM lined flexible hose assemblies. Compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240502056
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: F3/8: ⅜” captive nut, F3/8 elbow: ⅜” captive nut (elbow), F1/2: ½” captive nut, F1/2 elbow: ½” captive nut (elbow), F3/4: ¾” captive nut, F3/4 elbow: ¾” captive nut (elbow), M8x1: M8x1, M10x1: M10x1, M12x1: M12x1, M3/8: ⅜” BSP (M), M1/2: ½” BSP (M), M3/4: ¾” BSP (M), T10: 10mm fitting with plain and short smooth tube with recess, 10MM: 10mm compression, 12MM: 12mm compression, 14MM: 14mm compression, 16MM: 16mm compression.
Marking:: AMG logo (‘AMG’), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: AMG-E-SS-F3/8-F3/8-DN8, AMG-E-SS-F3/8-M1/2-DN8, AMG-E-SS-F3/8-M8X1-DN8, AMG-E-SS-F3/8-M10X1-DN8, AMG-E-SS-F3/8-M12X1-DN8, AMG-E-SS-F3/8-M3/8-DN8, AMG-E-SS-F3/8-F3/8 elbow-DN8, AMG-E-SS-F1/2-F3/8-DN8, AMG-E-SS-F1/2-F1/2-DN8, AMG-E-SS-F1/2-M1/2-DN8, AMG-E-SS-F1/2-M8X1-DN8, AMG-E-SS-F1/2-M10X1-DN8, AMG-E-SS-F1/2-M12X1-DN8, AMG-E-SS-F1/2-M3/8-DN8, AMG-E-SS-F1/2-F1/2 elbow-DN8, AMG-E-SS-F3/4-F3/4-DN8, AMG-E-SS-F3/4-M1/2-DN8, AMG-E-SS-F3/4-M3/4-DN8, AMG-E-SS-F3/4-F3/4 elbow-DN8, AMG-E-SS-M1/2-F1/2 elbow-DN8, AMG-E-SS-M3/4-F3/4 elbow-DN8, AMG-E-SS-M3/8-F3/8 elbow-DN8, AMG-E-SS-F3/8-T10-DN8, AMG-E-SS-F3/8-10MM-DN8, AMG-E-SS-F3/8-12MM-DN8, AMG-E-SS-F1/2-T10-DN8, AMG-E-SS-F1/2-10MM-DN8, AMG-E-SS-F1/2-12MM-DN8, AMG-E-SS-F1/2-14MM-DN8, AMG-E-SS-F3/4-16MM-DN12, AMG-E-SS-M1/2-10MM-DN8, AMG-E-SS-M1/2-12MM-DN8, AMG-E-SS-M1/2-14MM-DN8, AMG-E-SS-M3/8-10MM-DN8, AMG-E-SS-M3/8-12MM-DN8, AMG-E-SS-F3/4-F3/4-DN10, AMG-E-SS-F1/2-F1/2-DN10, AMG-E-SS-F1/2-M1/2-DN10, AMG-E-SS-F3/8-M10X1-DN10, AMG-E-SS-F3/8-M12X1-DN10, AMG-E-SS-F1/2-F1/2 elbow-DN10, AMG-E-SS-F3/4-M1/2-DN10, AMG-E-SS-F3/4-M3/4-DN10, AMG-E-SS-F3/4-F3/4 elbow-DN10, AMG-E-SS-F1/2-M10X1-DN10, AMG-E-SS-F1/2-M12X1-DN10, AMG-E-SS-M1/2-F1/2 elbow-DN10, AMG-E-SS-M3/4-F3/4 elbow-DN10, AMG-E-SS-F3/4-F3/4-DN12, AMG-E-SS-F1/2-F1/2-DN12, AMG-E-SS-F3/4-M3/4-DN12, AMG-E-SS-F3/4-F3/4 elbow-DN12, AMG-E-SS-M1/2-F1/2 elbow-DN12, AMG-E-SS-M3/4-F3/4 elbow-DN12, AMG-E-SS-F3/4-M1/2-DN12, AMG-E-SS-F1/2-F1/2 elbow-DN12.

Approval Holder:: Yuhuan AMG Just Valve Co., Ltd

Company Name
Yuhuan AMG Just Valve Co., Ltd
Address
M&E Industrial Zone, Yuhuan, Zhejiang
Postcode
317600
Country
China
Phone
86 576 87281908
General Email
export@amg.com.cn

View All Listings by this Company
Manufacturer:: Yuhuan AMG Just Valve Co., Ltd

Company Name
Yuhuan AMG Just Valve Co., Ltd
Address
M&E Industrial Zone, Yuhuan, Zhejiang
Postcode
317600
Country
China
Phone
86 576 87281908
General Email
export@amg.com.cn

View All Listings by this Company

WRAS Approval Number: #240704012

Range of stainless steel or nylon braided EPDM lined flexible hose assemblies with various brass end connections. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10 Bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240704012
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see models
Marking:: Lux, WRAS, Date of Manufacture (YY), PN&DN stamped on crimped connector
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: Bore diameter – DN6 Male M8, M10, M11, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Bore diameter – DN8 Male M10, M11, M12, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Female 1/2” BSP female with swivel conical nut and o-ring Female Elbow 1/4” BSP, 3/8” BSP Female Elbow 3/8” BSP w/gasket Compression 15mm Plug in 10mm (with 2 'O'-rings) Bore diameter – DN10 Male M12, 3/8" BSP, 1/2” BSP Female w/gasket 1/2” BSP, 3/8” BSP, 3/4” BSP Female 1/2” BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in elbow 18.6mm Straight Plug in 17mm Bore diameter – DN13 Male 1/2” BSP, 3/4" BSP Female w/gasket 1/2” BSP, 3/4” BSP Female 3/4"BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in 12mm, 15mm, 29mm, 29mm long Plug in elbow 18mm, 23.6mm, 28mm

Approval Holder:: LUXOR S.p.A.

Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company
Manufacturer:: LUXOR S.p.A.

Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company

WRAS Approval Number: #241002078

Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002078
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models.
Marking:: Hualing logo, WRAS and date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company
Manufacturer:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company

WRAS Approval Number: #240704037

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240704037
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT

Approval Holder:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company
Manufacturer:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company

WRAS Approval Number: #2211708

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2211708
Size:: see model
Marking:: South Coast Sales Logo, WRAS and date of manufacture YYYY on crimp connection.
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: ½“ compression x ½" (F) BSP captive nut: EMBW130, length 30cm EMBW150, length 50cm - DN8 ¾“ compression x ¾" (F) BSP captive nut: EMBW530, length 30cm EMBW550, length 50cm - DN13

Approval Holder:: South Coast Sales

Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company

WRAS Approval Number: #240602065

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240602065
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Dolphin logo on end connections
Installation Requirements:: R001
Expiry date:: 30/06/2029
Model:: Model Code: Dolphin Blue DB30abb.ccc.d.eee a’ indentifies the material type of the metal interlocked hose and threaded end connectors; these codes can be: o DB303bb. for brass material o DB304bb. for stainless steel material  ‘bb’ identifies the type of fitting/threaded connector at either end of the hose ranging from DB30a1. to DB30a11. Can be either one or two digits.  ‘ccc’ identifies the length range of the metal interlocked hose from 500mm ‘DB30abb.050’ to 2000mm ‘DB30abb.200’  ‘d’ identifies the external finish to the metal parts from ‘DB30abb.ccc.1 to DB30ab.ccc.9’: o ‘.1’ denotes brushed/satin polished o ‘.2’ denotes mirror polished o ‘.3’ denotes brushed/satin polished with PVD coating o ‘.4’ denotes mirror polished with PVD coating o ‘.5’ denotes powder coated o ‘.6 - .9’ to denote other material and finish options that may be available in the future  ‘eee’ indicates the colour of PVD or powder coat that has been applied from ‘DB30abb.ccc.d.00’ to ‘DB30abb.ccc.d.999’. Can be either two or three digits.

Approval Holder:: Dolphin Solutions Limited

Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company