Directory Search Results

Print List

#240102030

Single hole, single outlet (fixed) electronically controlled tap assemblies (either black finish or chromium plated brass bodies). Flow is controlled by a solenoid valve which is actuated via an infra-red sensor. The spout incorporates a stainless-steel strainer on the outlet. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a combination valve with a DZR brass body consisting of a servicing valve, a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a stainless-steel strainer and plastic flow regulator on the outlet. The combination valve has a compression inlet for use with copper pipe (manufactured to BS EN 1057). The tap incorporates a soap dispenser with a separate dispensing nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240102030
Note:
R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout. R008 applies to the solenoid valve.
Size:
15mm compression (to combination valve).
Marking:
Ideal Standard on body.
Installation Requirements:
R001 R006 R007 R008 R570
Expiry date:
31/01/2029
Model:
A7512AA (chrome). A7512B3 (black finish).
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240102031

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (either black finish or chromium plated brass bodies). Flow is controlled by a solenoid valve which is actuated via an infra-red sensor. The spout incorporates a stainless-steel strainer on the outlet. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a combination valve with a DZR brass body consisting of a servicing valve, a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a stainless-steel strainer and plastic flow regulator on the outlet. The combination valve has a compression inlet for use with copper pipe (manufactured to BS EN 1057). The tap incorporates a soap dispenser with a separate dispensing nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240102031
Note:
R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout. R008 applies to the solenoid valve.
Size:
15mm compression (to combination valve).
Marking:
Ideal Standard on body.
Installation Requirements:
R001 R007 R008 R040 R570
Expiry date:
31/01/2029
Model:
A7708AA (chrome). A7708B3 (black finish).
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#240104016

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies comprising of a concealed brass body and a separate spout and trim set (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The inlets (within the) concealed body incorporate a plastic filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240104016
Size:
½” BSP (F)
Marking:
Gessi etched on face plate of spout
Installation Requirements:
R001 R040
Expiry date:
31/01/2029
Model:
44665 58105 (for use with 44665) 58107 (for use with 44665)
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2312375

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2312375
Size:
½” BSP (M)
Marking:
MP Company logo on body.
Installation Requirements:
R001 R006
Expiry date:
31/12/2028
Model:
MP111E

Approval Holder:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Unit 1 Modular Business Park Norton Road Stevenage
Postcode
SG1 2FZ
Country
United Kingdom
Phone
07852550494
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval


#2312376

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2312376
Size:
½” BSP (M)
Marking:
MP Company Logo on body
Installation Requirements:
R001 R006
Expiry date:
31/12/2028
Model:
MP112E

Approval Holder:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Unit 1 Modular Business Park Norton Road Stevenage
Postcode
SG1 2FZ
Country
United Kingdom
Phone
07852550494
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1484 of 2250

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.