‘Center Pot’ range of expansion vessels. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Refer to model

Marking:

Center logo, Domestic Pot Expansion Vessel, Litre capacity, max temperature & pressure, date of manufacture, Wolseley & WRAS on label.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

597826 Center Pot Expansion Vessel – 8L 597827 Center Pot Expansion Vessel – 12L 597828 Center Pot Expansion Vessel – 18L 597829 Center Pot Expansion Vessel – 25L 597830 Center Pot Expansion Vessel – 35L

Product Images

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of clamp fittings incorporating DZR brass bodies. For use with PE 100 RC pipe (manufactured to EN12201) only. Maximum operating pressure: 16 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Uponor logo (U), CR, W (wipex code on connections) and size.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of Instantor Irish Compression Fittings with brass bodies for use with copper pipe to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

‘S’ logo on body. Irish Instantor, size, IS/EN1254-2 on nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

310004 Straight Coupler - 1 1/4" 310005 Straight Coupler - 1 1/2" 310006 Straight Coupler - 2" 310042 Reducing Straight Coupler - 1 1/4" X 3/4" 310043 Reducing Straight Coupler - 1 1/4" X 1" 311003 Straight Threaded Coupler - 1" 311004 Straight Threaded Coupler M.I X C - 1 1/4" 311005 Straight Threaded Coupler M.I X C - 1 1/2" 311006 Straight Threaded Coupler M.I X C - 2" 311043 Reducing Straight Threaded Coupler M.I X C - 1 1/4" X 1" 311054 Reducing Straight Threaded Coupler M.I X C - 1 1/2" x" x 1 4 1" 311035 Reducing straight threaded coupler M.I x C 1" x 1 1/2" 311045 Reducing Straight threaded Coupler M.I x C 1 1/4" x 1 1/2" 312004 Straight Threaded coupler F.I x C 1 1/4" 312005 Straight Threaded coupler F.I x C 1 1/2" 312006 Straight Threaded coupler F.I x C 2" 312045 Straight Threaded coupler F.I x C 1 1/4" x 1 1/2" 315004 Elbow CxC 1 1/4" 315005 Elbow CxC 1 1/2" 315006 Elbow CxC 2" 316004 Elbow Threaded M.I 1 1/4" 316005 Elbow Threaded M.I 1 1/2" 316006 Elbow Threaded M.I 2" 317004 Elbow Threaded F.I 1 1/4" 317005 Elbow threaded F.I 1 1/2" 317006 Elbow Threaded F.I 2" 318004 Equal Tee 1 1/4" 318005 Equal Tee 1 1/2" 318006 Equal Tee 2" 318442 Reducing Tee 1 1/4" x 1 1/4" x 3/4" 318443 Reducing Tee 1 1/4" x 1 1/4" x 1" 318553 Reducing Tee 1 1/2" x 1 1/2" x 1" 318554 Reducing Tee 1 1/2" x 1 1/2" X 1 1/4" 310003 Straight Coupler -1" 312003 Straight Threaded coupler F.I x C 1"

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

FLOWTECH range of fusion welded, PP-RCT fittings for use with Atlas PP-RCTGF pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402066

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm – 110mm - FOR INDIVIDUAL SIZE SEE MODEL

Marking:

'FLOWTECH UAE, PN-25, PP-RCT & size on fitting. Modern Plastic Industry, Flowtech & technical information on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Model Code (Size): 90° Elbow FCTE9020 (20mm) FCTE9025 (25mm) FCTE9032 (32mm) FCTE9040 (40mm) FCTE9050 (50mm) FCTE9063 (63mm) FCTE9075 (75mm) FCTE9090 (90mm) FCTE90110 (110mm) 45° Elbow FCTE4520 (20mm) FCTE4525 (25mm) FCTE4532 (32mm) FCTE4540 (40mm) FCTE4550 (50mm) FCTE4563 (63mm) FCTE4575 (75mm) FCTE4590 (90mm) FCTE45110 (110mm) Tee: FCTT20 (20mm) FCTT25 (25mm) FCTT32 (32mm) FCTT40 (40mm) FCTT50 (50mm) FCTT63 (63mm) FCTT75 (75mm) FCTT90 (90mm) FCTT110 (110mm) Socket: FCTS20 (20mm) FCTS25 (25mm) FCTS32 (32mm) FCTS40 (40mm) FCTS50 (50mm) FCTS63 (63mm) FCTS75 (75mm) FCTS90 (90mm) FCTS110 (110mm) End Plug: FCTEC20 (20mm) FCTEC25 (25mm) FCTEC32 (32mm) FCTEC40 (40mm) FCTEC50 (50mm) FCTEC63 (63mm) FCTEC75 (75mm) FCTEC90 (90mm) FCTEC110 (110mm) Reducing Tee: FCTRT20X25X20 (20mm x 25mm x 20mm) FCTRT25X20X20 (25mm x 20mm x 20mm) FCTRT25X20 (25mm x 20mm x 25mm) FCTRT32X20 (32mm x 20mm x 32mm) FCTRT25X32 (32mm x 25mm x 25mm) FCTRT32X25 (32mm x 25mm x 32mm) FCTRT40X20 (40mm x 20mm x 40mm) FCTRT40X25 (40mm x 25mm x 40mm) FCTRT40X32 (40mm x 32mm x 40mm) FCTRT50X20 (50mm x 20mm x 50mm) FCTRT50X25 (50mm x 25mm x 50mm) FCTRT50X32 (50mm x 32mm x 50mm) FCTRT50X40 (50mm x 40mm x 50mm) FCTRT63X20 (63mm x 20mm x 63mm) FCTRT63X25 (63mm x 25mm x 63mm) FCTRT63X32 (63mm x 32mm x 63mm) FCTRT63X40 (63mm x 40mm x 63mm) FCTRT63X50 (63mm x 50mm x 63mm) FCTRT75X32 (75mm x 32mm x 75mm) FCTRT75X40 (75mm x 40mm x 75mm) FCTRT75X50 (75mm x 50mm x 75mm) FCTRT75X63 (75mm x 63mm x 75mm) FCTRT90X40 (90mm x 40mm x 90mm) FCTRT90X50 (90mm x 50mm x 90mm) FCTRT90X63 (90mm x 63mm x 90mm) FCTRT90X75 (90mm x 75mm x 90mm) FCTRT110X63 (110mm x 63mm x 110mm) FCTRT110X75 (110mm x 75mm x 110mm) FCTRT110X90 (110mm x 90mm x 110mm) Reducer: FCTR25X20 (25mm x 20mm FCTR32X20 (32mm x 20mm) FCTR32X25 (32mm x 25mm) FCTR40X20 (40mm x 20mm) FCTR40X25 (40mm x 25mm) FCTR40X32 (40mm x 32mm) FCTR50X20 (50mm x 20mm) FCTR50X25 (50mm x 25mm) FCTR50X32 (50mm x 32mm) FCTR50X40 (50mm x 40mm) FCTR63X20 (63mm x 20mm) FCTR63X25 (63mm x 25mm) FCTR63X32 (63mm x 32mm) FCTR63X40 (63mm x 40mm) FCTR63X50 (63mm x 50mm) FCTR75X40 (75mm x 40mm) FCTR75X50 (75mm x 50mm) FCTR75X63 (75mm x 63mm) FCTR90X50 (90mm x 50mm) FCTR90X63 (90mm x 63mm) FCTR90X75 (90mm x 75mm) FCTR110X63 (110mm x 63mm) FCTR110X75 (110mm x 75mm) FCTR110X90 (110mm x 90mm) End Plug - BSP(M): FCTEP0.5 (1/2" BSP(M)) FCTEP0.75 (3/4" BSP(M)) FCTEP1 (1" BSP(M)) Cross Tee: FCTCT20 (20mm) FCTCT25 (25mm) FCTCT32 (32mm) Union Stub: CTUS20 (20mm) CTUS25 (25mm) CTUS32 (32mm) CTUS40 (40mm) CTUS50 (50mm) CTUS63 (63mm) Pipe Bracket: FCTPB20 (20mm) FCTPB25 (25mm) FCTPB32 (32mm) Cross Over Union: FCTCOS20(20mm) FCTCOS25 (25mm) FCTCOS32 (32mm) Plastic Union: FCTU20 (20mm) FCTU25 (25mm) FCTU32 (32mm) Cross Over Small: FCTCO20 (20mm) FCTCO25 (25mm FCTCO32 £"mm) Flange Stub: FCTST63 (63mm) FCTST75 (75mm) FCTST90 (90mm) FCTST110 (110mm) End Plug: FCTEPL0.5 (1/2'' BSP (M)) FCTEPL0.75 (3/4’' BSP (M)) Female Tee Transition: FCTFT20X0.5 (20mm x 1/2" BSP (F)) FCTFT20X0.75 (20mm x 3/4" BSP (F)) FCTFT25X0.5 (25mm x 1/2" BSP (F)) FCTFT25X0.75 (25mm x 3/4" BSP (F)) FCTFT32X0.5 (32mm x 1/2" BSP (F)) FCTFT32X0.75 32mm x 3/4" BSP (F)) FCTFT32X1 (32mm x 1" BSP (F)) Female Elbow Transition: FCTFE20X0.5 (20mm x 1/2’’ BSP (F)) FCTFE20X0.75 (20mm x 3/4" BSP (F)) FCTFE25X0.5 (25mm x 1/2" BSP (F)) FCTFE25X0.75 (25mm x 3/4" BSP (F)) FCTFE32X0.5 (32mm x 1/2" BSP (F)) FCTFE32X0.75 (32mm x 3/4" BSP (F)) FCTFE32X1 (32mm x 1" BSP (F)) Female Socket Transition: FCTFS20X0.5 (20mm x 1/2’’ BSP (F)) FCTFS20X0.75 (20mm x 3/4" BSP (F)) FCTFS25X0.5 (25mm x 1/2" BSP (F)) FCTFS25X0.75 (25mm x 3/4" BSP (F)) FCTFS32X0.5 (32mm x 1/2" BSP (F)) FCTFS32X0.75 (32mm x 3/4" BSP (F)) Female Hex Socket Transition: FCTFHS32X1 (32mm x 1" BSP (F)) FCTFHS40X1 (40mm x 1’’ BSP (F)) FCTFHS40X1.25 (40mm x 1.1/4’’ BSP (F)) FCTFHS50X1.5 (50mm x 1.1/2’’ BSP (F)) FCTFHS63X2 (63mm x 2’’ BSP (F)) FCTFHS75X2.5 (75mm x 2.1/2’’ BSP (F)) FCTFHS90X3 (90mm x 3’’ BSP (F)) FCTFHS110X4 (110mm x 4’’ BSP (F)) Male Socket Transition: FCTMS20X0.5 (20mm x 1/2’’ BSP (M)) FCTMS20X0.75 (20mm x 3/4" BSP (M)) FCTMS25X0.5 (25mm x 1/2" BSP (M)) FCTMS25X0.75 (25mm x 3/4" BSP (M)) FCTMS32X0.5 (32mm x 1/2" BSP (M)) FCTMS32X0.75 (32mm x 3/4" BSP (M)) Male Hex Socket Transition: FCTMHS32X1 (32mm x 1" BSP (M)) FCTMHS40X1 (40mm x 1’’ BSP (M)) FCTMHS40X1.25 (40mm x 1.1/4’’ BSP (M)) FCTMHS50X1.5 (50mm x 1.1/2’’ BSP (M)) FCTMHS63X2 (63mm x 2’’ BSP (M)) FCTMHS75X2.5 (75mm x 2.1/2’’ BSP (M)) FCTMHS90X3 (90mm x 3’’ BSP (M)) FCTMHS110X4 (110mm x 4’’ BSP (M)) Male Elbow Transition: FCTME20X0.5 (20mm x 1/2’’ BSP (M)) FCTME20X0.75 (20mm x 3/4" BSP (M)) FCTME25X0.5 (25mm x 1/2" BSP (M)) FCTME25X0.75 (25mm x 3/4" BSP (M)) FCTME32X0.5 (32mm x 1/2" BSP (M)) FCTME32X0.75 (32mm x 3/4" BSP (M)) FCTME32X1 (32mm x 1" BSP (M)) Pipe: FCTGF20X2.8 SD7.4 (20mm OD x 2.8mm thickness) FCTGF25X3.5 SD7.4 (25mm OD x 3.5mm thickness) FCTGF32X4.4 SD7.4 (32mm OD x 4.4mm thickness) FCTGF40X5.5 SD7.4 (40mm OD x 5.5mm thickness) FCTGF50X6.9 SD7.4 (50mm OD x 6.9mm thickness) FCTGF63X8.6 SD7.4 (63mm OD x 8.6mm thickness) FCTGF75X10.3 SD7.4 (75mm OD x 10.3mm thickness) FCTGF90X12.3 SD7.4 (90mm OD x 12.3mm thickness) FCTGF110X15.1 SD7.4 (110mm OD x 15.1mm thickness)

Approval Holder:

Modern Plastic Industry LLC

Company Name

Modern Plastic Industry LLC

Address

Dubai Investment Park, PO Box No. 31550, Dubai

Country

United Arab Emirates

View All Listings by this Company

Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

General Fittings logo, size on body and nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

1N00.00 - Double straight fittings 1N0000H101000A - 10x10, 1N0000H121200A - 12x12, 1N0000H151500A - 15x15, 1N0000H181800A - 18x18, 1N0000H222200A - 22x22, 1N0000H282800A - 28x28, 1N0000H353500A - 35x35, 1N0000H424200A - 42x42, 1N0000H545400A - 54x54. 1N00.01 - Male straight fitting 1N0001H041500A - 1/2"x15, 1N0001H041800A - 1/2"x18, 1N0001H031000A - 3/8"x10, 1N0001H031200A - 3/8"x12, 1N0001H031500A - 3/8"x15, 1N0001H041000A - 1/2"x10, 1N0001H041200A - 1/2"x12, 1N0001H042200A - 1/2"x22, 1N0001H051500A - 3/4"x15, 1N0001H051800A - 3/4"x18, 1N0001H052200A - 3/4"x22, 1N0001H052800A - 3/4"x28, 1N0001H102200A - 1"x22, 1N0001H102800A - 1"x28, 1N0001H123500A - 1"1/4x35, 1N0001H144200A - 1"1/2x42, 1N0001H205400A - 2"x54. 1N00.02 - Female straight fitting 1N0002H031000A - 3/8"x10, 1N0002H031200A - 3/8"x12, 1N0002H031500A - 3/8"x15, 1N0002H041000A - 1/2"x10, 1N0002H041200A - 1/2"x12, 1N0002H041400A - 1/2"x14, 1N0002H041500A - 1/2"x15, 1N0002H041800A - 1/2"x18, 1N0002H042200A - 1/2"x22, 1N0002H051500A - 3/4"x15, 1N0002H051800A - 3/4"x18, 1N0002H052200A - 3/4"x22, 1N0002H102200A - 1"x22, 1N0002H102800A - 1"x28, 1N0002H144200A - 1"1/2x42, 1N0002H123500A - 1"1/4x35, 1N0002H205400A - 2"x54. 1N00.03 - Reduced straight fitting 1N0003H121000A - 12x10, 1N0003H151000A - 15x10, 1N0003H151200A - 15x12, 1N0003H181500A - 18x15, 1N0003H221500A - 22x15, 1N0003H282200A - 28x22, 1N0003H351500A - 35x15, 1N0003H352200A - 35x22. 1N00.08 - SIDE Female TEE 1N0008H041515A - 1/2"x15x15, 1N0008H042222A - 1/2"x22x22, 1N0008H052222A - 3/4"x22x22. 1N00.09 - TEE ELBOW 1N0009H151515A - 15x15x15, 1N0009H221515A - 22x15x15, 1N0009H222215A - 22x22x15, 1N0009H222222A - 22x22x22. 1N00.10 - TEE 1N0010H101010A - 10x10x10, 1N0010H121212A - 12x12x12, 1N0010H151515A - 15x15x15, 1N0010H181818A - 18x18x18, 1N0010H222222A - 22x22x22, 1N0010H282828A - 28x28x28, 1N0010H353535A - 35x35x35, 1N0010H424242A - 42x42x42, 1N0010H545454A - 54x54x54. 1N00.12 - FEMALE TEE 1N0012H120412A - 12x1/2"x12, 1N0012H150315A - 15x3/8"x15, 1N0012H150415A - 15x1/2"x15, 1N0012H180418A - 18x1/2"x18, 1N0012H180518A - 18x3/4"x18, 1N0012H220422A - 22x1/2"x22, 1N0012H220522A - 22x3/4"x22, 1N0012H280428A - 28x1/2"x28, 1N0012H280528A - 28x3/4"x28. 1N00.13 - REDUCED TEE 1N0013H121512A - 12x15x12, 1N0013H151212A - 15x12x12, 1N0013H151215A -. 15x12x15, 1N0013H151512A - 15x15x12, 1N0013H152215A - 15x22x15, 1N0013H221515A - 22x15x15, 1N0013H221522A - 22x15x22, 1N0013H222215A - 22x22x15, 1N0013H222822A - 22x28x22, 1N0013H281522A - 28x15x22, 1N0013H281528A - 28x15x28, 1N0013H282215A - 28x22x15, 1N0013H282222A - 28x22x22, 1N0013H282228A - 28x22x28, 1N0013H282815A - 28x28x15, 1N0013H282822A - 28x28x22, 1N0013H351535A - 35x15x35, 1N0013H352235A - 35x22x35, 1N0013H352835A - 35x28x35. 1N00.17 - SIDE M. TEE 1N0017H041515A - 1/2"x15x15, 1N0017H052222A - 3/4"x22x22, 1N0017H102222A - 1"x22x22, 1N0017H102828A - 1"x28x28. 1N00.20 - DOUBLE ELBOW 1N0020H101000A - 10x10, 1N0020H121200A - 12x12, 1N0020H151500A - 15x15, 1N0020H181800A - 18x18, 1N0020H222200A - 22x22, 1N0020H282800A - 28x28, 1N0020H353500A - 35x35, 1N0020H424200A - 42x42, 1N0020H545400A - 54x54. 1N00.21 - MALE ELBOW 1N0021H031000A - 3/8"x10, 1N0021H031200A - 3/8"x12, 1N0021H031500A - 3/8"x15, 1N0021H041000A - 1/2"x10, 1N0021H041200A - 1/2"x12, 1N0021H041500A - 1/2"x15, 1N0021H041800A - 1/2"x18, 1N0021H042200A - 1/2"x22, 1N0021H051200A - 3/4"x12, 1N0021H051500A - 3/4"x15, 1N0021H051800A - 3/4"x18, 1N0021H052200A - 3/4"x22, 1N0021H052800A - 3/4"x28, 1N0021H102200A - 1"x22, 1N0021H102800A - 1"x28, 1N0021H123500A - 1"1/4x35, 1N0021H144200A - 1"1/2x42, 1N0021H205400A - 2"x54. 1N00.22 - FEMALE ELBOW 1N0022H205400A - 2"X54, 1N0022H031000A - 3/8"x10, 1N0022H031200A - 3/8"x12, 1N0022H031500A - 3/8"x15, 1N0022H041000A - 1/2"x10, 1N0022H041200A - 1/2"x12, 1N0022H041400A - 1/2"x14, 1N0022H041500A - 1/2"x15, 1N0022H041800A - 1/2"x18, 1N0022H042200A - 1/2"x22, 1N0022H051200A - 3/4"x12, 1N0022H051400A - 3/4"x14, 1N0022H051500A - 3/4"x15, 1N0022H051800A - 3/4"x18, 1N0022H052200A - 3/4"x22, 1N0022H052800A - 3/4"x28, 1N0022H102200A - 1"x22, 1N0022H102800A - 1"x28, 1N0022H123500A - 1"1/4x35, 1N0022H144200A - 1"1/2x42. 1N00.23 - WALLPLATE ELBOW 1N0023H041200A - 1/2"x12, 1N0023H041500A - 1/2"x15, 1N0023H042200A - 1/2"x22, 1N0023H051500A - 3/4"x15, 1N0023H052200A - 3/4"x22. 1N00.29 - REDOUBLE ELBOW 1N0029H121000A - 12x10, 1N0029H151000A - 15x10, 1N0029H151200A - 15x12, 1N0029H221500A - 22x15, 1N0029H281500A - 28x15, 1N0029H282200A - 28x22. 1N00.30 - ADAPTER ELBOW 1N0030H151500A - 15x15. 1N00.36 - CROSS 1N0036H150000A - 15x15x15x15, 1N0036H220000A - 22x22x22x22, 1N0036H280000A - 28x28x28x28. 1N00.40 - MALE CAP 1N0040H100000A - 10, 1N0040H120000A - 12, 1N0040H150000A - 15, 1N0040H180000A - 18, 1N0040H220000A - 22, 1N0040H280000A - 28, 1N0040H350000A - 35. 1N00.43 - REPAIRING FITTING 1N0043H222200A - 22x22. 1N00.B1 - CROSS R. 1N00B1H221500A - 22x15x22x15, 1N00B1H221501A - 22x15x15x15. 1N00.B2 - MALE WALLPLATE ELBOW 1N00B2H051500A - 3/4"x15. 1N00.B8 - MALE STRAIGHT FOR RAD. 1N00B8H041500A - 1/2"x15. 1N00.B6 - DOUBLE ELBOW WITH VENT 1N00B6H222200A - 22x22. 1N00.B9 - ELBOW FOR RAD 1N00B9H041500A - 1/2"x15. Model added in July 2025: 1N00.01 - Male straight fitting 1N0001H021500A 1/4"x15

Manufacturer:

General Fittings S.p.A

Company Name

General Fittings S.p.A

Address

Via Golgi 73/75 25064 Gussago Brescia

Country

Italy

Phone

+39 0303739017

View All Listings by this Company