Directory Search Results

Print List

#2203364

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. For use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2203364
Size:
15 & 22 compression
Marking:
VIP, size, CR, flow arrow, WRAS & date of manufacture, (MM/YY) on body
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
02/0015/015 & 02/0015/022 CHECK VALVE ASSEMBLIES

Approval Holder:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Country
United Kingdom
Phone
01942 885 700

View All Listings by this Company

Print This Approval


#2204022

Range of Caprice assisted baths which include a choice of with or without a hoist. Flow is controlled via a thermostatic mixing valve supplying the bath spout outlet or shower handset. The discharge from the bath spout and shower handset in via a type AUK 3 airgap, verified by measurement, suitable for Fluid Category 5 backflow protection Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 46°C

Section:
0055 Bath - Assisted bathing unit(s)
WRAS Approval Number:
2204022
Note:
The inlets to the thermostatic mixing valve incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection, therefore IRN 010 applies.
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 22mm push-fit end connections.
Marking:
Reval, model number, product info on label of leg. Reval on front panel.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
Caprice fixed height bath without hoist 7100.0GS70R – Caprice fixed height bath L/H model 172cm length 7100.0DS70R – Caprice fixed height bath R/H model 172cm length 7100.0GS90R – Caprice fixed height bath L/H model 192cm length 7100.0DS90R – Caprice fixed height bath R/H model 192cm length Caprice variable height bath without hoist 7100.1GS70R – Caprice variable height bath L/H model 172cm length 7100.1DS70R – Caprice variable height bath R/H model 172cm length 7100.1GS90R – Caprice variable height bath L/H model 192cm length 7100.1DS90R – Caprice variable height bath R/H model 192cm length Caprice variable height bath with hoist 7100.1GS71R – Caprice variable height bath with hoist L/H model 172cm length 7100.1DS71R – Caprice variable height bath with hoist R/H model 172cm length 7100.1GS91R – Caprice variable height bath with hoist L/H model 192cm length 7100.1DS91R 0 Caprice variable height bath with hoist R/H model 192cm length

Approval Holder:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company
Manufacturer:
Reval Continuing Care Limited
Company Name
Reval Continuing Care Limited
Address
Unit 17 St Theodore’s Way Brynmenyn Business Centre Bridgend
Postcode
CF32 9TZ
Country
United Kingdom
Phone
01656 721001
General Email
lynette@revalcc.com

View All Listings by this Company

Print This Approval


#2205323

Range of sectional stainless steel storage cistern with lid. Maximum operating temperature 60°C.

Section:
0140 Cisterns
Section Subtitle:
Cold water storage and lids, metal.
WRAS Approval Number:
2205323
Size:
1000L – 100,0000L
Marking:
Liangyu company logo, capacity and website on adhesive label on body
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
LYSSWT-01

Approval Holder:
Liangyu Hitech Technical Services LLC.
Company Name
Liangyu Hitech Technical Services LLC.
Address
Office 2003/2004 Churchill Executive Tower Business BAy Dubai
Country
United Arab Emirates

View All Listings by this Company

Print This Approval


#2203302

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2203302
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on operating member
Installation Requirements:
R001 R010 R090
Expiry date:
31/03/2027
Model:
All in one pull out

Approval Holder:
San Marco Rubinetteria S.r.l.
Company Name
San Marco Rubinetteria S.r.l.
Address
Via Carducci, 10 Pray
Postcode
13867
Country
Italy
Phone
+39 15765 5244
General Email
egiglio@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2204314

Single hole, single outlet (swivel) combination tap assembly, (Chrome plated) brass body incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull out spray. The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2204314
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Franke on operation member.
Installation Requirements:
R001 R010 R090
Expiry date:
30/04/2027
Model:
FUJI PULL OUT

Approval Holder:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Country
United Kingdom
Phone
0161 4360280

View All Listings by this Company

Print This Approval


#2107033

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with either a single lever or dome type operating member (see model). The spout outlet incorporates a plastic aerator (specific models only - see model section). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107033
Size:
M10
Marking:
QIXI and WRAS on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
Cartridge, Single Lever & Aerator: SH-T8002AW, SH-T8002L, SH-T8002LN, SH-T8012W, SH-T8012L, SH-T8012LN, SH-T8092W, SH-T8172W, SH-T8172NW, SH-T8172L, SH-T8182NW, SH-T8182AMW, SH-T8202NW, SH-T8202MW, SH-T8202L, SH-T8492MW, SH-T8532W, SH-T8682W, SH-T8682L, SH-T8552W, SH-T8552MW, SH-T8582MW, SH-T8622W, SH-T8712AW, SH-T8812MW, SH-T8812L, SH-T8842MW, SH-T8922MW, SH-T8982W, SH-T8982MW, SH-T9022W, SH-T9022MW, SH-T9052MW, SH-T9072W, SH-T9072MW, SH-T9162W, SH-T9162MW, SH-T9202W, SH-T9272W, SH-T9272NW, SH-T9282W, SH-T9282NW, SH-T9302W. Cartridge, Single Lever & no aerator: SH-T8242W, SH-T8322NW, SH-T8322MW, SH-T8322L, SH-T8542MW, SH-T8882W, SH-T8882AW, SH-T8882AMW, SH-T9122W, SH-T9122MW. Cartridge, Dome Type & no aerator: SH-T9182W, SH-T9182MW.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval


#2204085

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes). Model A05406 has a non-rising spindle headwork with cross top operating members. All other models have a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204085
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Nabis on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
A05414, A05425, A05426, A05408, A05409, A05401, A05406 & A05433 combination tap assemblies

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2204086

Range of single hole, single outlet fixed combination tap assemblies, incorporating brass bodies (various finishes), ceramic cartridge headwork with a single lever operating member and waterfall spout outlet. The waterfall spout outlets of models A05421, A05422 & A05418 incorporate a stainless-steel mesh. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204086
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connection.
Marking:
Nabis on body.
Installation Requirements:
R001 R006 R160
Expiry date:
30/04/2027
Model:
A05415, A05421, A05422 & A05418 combination tap assemblies

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2107118

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks with either a single lever, cross top or dome type operating member (see model). The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107118
Size:
M10
Marking:
QIXI and WRAS on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
Ceramic Disc, Single Lever: SH-T8032AW, SH-T8063LW, SH-T8752AW. Ceramic Disc, Cross Top: SH-T8032W, SH-T8044W, SH-T8044AW, SH-T8063AW, SH-T8662W. Ceramic Disc, Dome Type: SH-T8063W.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval


#2107119

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a waterfall type with or without a stainless-steel mesh (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107119
Size:
M10
Marking:
QIXI and WRAS on rear of body
Installation Requirements:
R001 R006 R160
Expiry date:
31/07/2026
Model:
Waterfall with Mesh: SH-T8112W, SH-T8112L, SH-T8412AW, SH-T8612CW, SH-T8612AMW, SH-T8612AL, SH-T8612W, SH-T8612L, SH-T8642AW, SH-T8852W, SH-T8852MW, SH-T8942W. Waterfall without Mesh: SH-T8772W, SH-T8772NW, SH-T8772L, SH-T8772AW, SH-T8772AMW, SH-T8772AL.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 142 of 884

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.