A deck mounted, three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks with cross top operating members. The product is also supplied with stainless steel braided, EPDM lined flexible connecting hose assemblies, intended for use between side body valves and spout. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0660 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2301028

Size:

¾” BSP (M) (side valves) connected to the ½” BSP (M) inlet on the spout via a stainless steel braided, EPDM lined flexible hose assembly with ½” BSP captive nuts

Marking:

CoalBrook logo rear of spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2028

Model:

XX 2006 YY Understanding the product code: Typical product code – XX2006YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. An example is BA which represents the name ‘Bank’. Middle numbers (e.g. 2006) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The FL12041515 model is supplied with an isolation valve including a dial type pressure gauge. The FL12041525 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Intatec logo, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

FL12041515, FL12041520, FL12041525.

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The 171293 model is supplied with an isolation valve including a dial type pressure gauge. The 171292 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Center, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

171291 CENTER G24 FILLING LOOP 171292 CENTER G24 FILLING LOOP WITH CAPS 171293 CENTER G24 FILLING LOOP WITH GAUGE

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

“Super Speedfit” range of push-fit fittings with polypropylene bodies and EPDM or NBR ‘O’-rings (NC2301 model only) for use with John Guest LLDPE tubing (blue, black, natural, green, orange, red, white and yellow). Maximum working pressure and maximum operating temperature: 10bar @20°C, 4 bar @60°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303006

Size:

See Model

Marking:

John Guest logo (a Brand of Reliance Worldwide Corporation (UK) Ltd) on fitting body and John Guest logo and size on collet. John Guest and product info on pipe.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

All sizes are Pushfit connections unless otherwise stated (1 side pushfit other side NPT/F or UNS). POLYPROPYLENE FITTINGS (IMPERIAL) STRAIGHT ADAPTORS NPTF THREAD: PP010821W: 1/4" OD x 1/8" NPTF STRAIGHT ADAPTOR, PP010822W: 1/4" OD x 1/4" NPTF STRAIGHT ADAPTOR, PP010823W: 1/4" OD x 3/8" NPTF STRAIGHT ADAPTOR, PP010824W: 1/4" OD x 1/2" NPTF STRAIGHT ADAPTOR, PP011222W: 3/8" OD x 1/4" NPTF STRAIGHT ADAPTOR, PP011223W: 3/8" OD x 3/8" NPTF STRAIGHT ADAPTOR, PP011224W: 3/8" OD x 1/2" NPTF STRAIGHT ADAPTOR, PP011623W: 1/2" OD x 3/8" NPTF STRAIGHT ADAPTOR, PP011624W: 1/2" OD x 1/2" NPTF STRAIGHT ADAPTOR. EQUAL STRAIGHT CONNECTOR: PP0408W: 1/4" OD x 1/4" OD EQUAL STRAIGHT CONNECTOR, PPM0408W: 5/16" OD x 5/16" OD EQUAL STRAIGHT CONNECTOR, PP0412W: 3/8" OD x 3/8" OD EQUAL STRAIGHT CONNECTOR, PP0416W: 1/2" OD x 1/2" OD EQUAL STRAIGHT CONNECTOR, NC2094: 1/4" OD x 1/4" OD EQUAL STRAIGHT CONNECTOR, NC2158: 1/4" OD x 1/4" OD EQUAL STRAIGHT CONNECTOR, NC2112: 5/16" OD x 5/16" OD EQUAL STRAIGHT CONNECTOR. REDUCING STRAIGHT CONNECTOR: PP201008W: 5/16" OD x 1/4" OD REDUCING STRAIGHT CONNECTOR, PP201208W: 3/8" OD x 1/4" OD REDUCING STRAIGHT CONNECTOR, PP201612W: 1/2" OD x 3/8" OD REDUCING STRAIGHT CONNECTOR, NC2099: 5/16" OD x 1/4" OD REDUCING STRAIGHT CONNECTOR. EQUAL TEE: PP0208W: 1/4" OD EQUAL TEE, PPM0208W: 5/16" OD EQUAL TEE, PP0212W: 3/8" OD EQUAL TEE, PP0216W: 1/2" OD EQUAL TEE. REDUCING TEE: PP30080812W: 1/4" OD x 1/4" OD x 3/8" BRANCH OD REDUCING TEE, PP30120812W: 3/8" OD x 1/4" OD x 3/8" BRANCH OD REDUCING TEE, PP30121208W: 3/8" OD x 3/8" OD x 1/4" BRANCH OD REDUCING TEE, PP301612W: 1/2" OD x 1/2" OD x 3/8" BRANCH OD REDUCING TEE. STEM TEE: PP531212W: 3/8" OD x 3/8" OD x 3/8" BRANCH OD STEM TEE. EQUAL ELBOW: PP0308W: 1/4" OD EQUAL ELBOW, PP0308W-B: 1/4" OD EQUAL ELBOW (Blue Collet), PPM0308W: 5/16" OD EQUAL ELBOW, PP0312W: 3/8" OD EQUAL ELBOW, PP0316W: 1/2" OD EQUAL ELBOW. REDUCING ELBOW: PP211008W: 5/16" OD x 1/4" OD REDUCING ELBOW, PP211208W: 3/8" OD x 1/4" OD REDUCING ELBOW, PP211612W: 1/2" OD x 3/8" OD REDUCING ELBOW. STEM ELBOW: PP220808W: 1/4" STEM OD x 1/4" TUBE OD STEM ELBOW, PPM220808W: 5/16" STEM OD x 5/16" TUBE OD STEM ELBOW, PP221208W: 3/8" STEM OD x 1/4" TUBE OD STEM ELBOW, PP221212W: 3/8" STEM OD x 3/8" TUBE OD STEM ELBOW, PP221616W: 1/2" STEM OD x 1/2" TUBE OD STEM ELBOW. RIGID ELBOW NPTF THREAD: PP480821W: 1/4" OD x 1/8" NPTF RIGID ELBOW, PP480822W: 1/4" OD x 1/4" NPTF RIGID ELBOW, PP480823W: 1/4" OD x 3/8" NPTF RIGID ELBOW, PP481222W: 3/8" OD x 1/4" NPTF RIGID ELBOW, PP481223W: 3/8" OD x 3/8" NPTF RIGID ELBOW, PP481623W: 1/2" OD x 3/8" NPTF RIGID ELBOW. BULKHEAD CONNECTOR: PP1208W: 1/4" OD x 1/4" BULKHEAD CONNECTOR, PP1212W: 3/8" OD x 3/8" BULKHEAD CONNECTOR, PP1216W: 1/2" OD x 1/2" BULKHEAD CONNECTOR, NCPP1208W: 1/4" OD x 1/4" BULKHEAD CONNECTOR. REDUCING BULKHEAD CONNECTOR: PP121208W: 3/8" OD x 1/4" REDUCING BULKHEAD CONNECTOR. FEMALE ADAPTORS NPTF THREAD: PP450821W: 1/4" OD x 1/8" NPTF FEMALE APAPTOR, PP450822W: 1/4" OD x 1/4" NPTF FEMALE APAPTOR, PP451222W: 3/8" OD x 1/4" NPTF FEMALE APAPTOR, PP451223W: 3/8" OD x 3/8" NPTF FEMALE APAPTOR. TAP ADAPTORS UNS THREAD: PP3208U7W: 1/4" OD x 7/16" UNS TAP ADAPTOR, PP3212U7W: 3/8" OD x 7/16" UNS TAP ADAPTOR. STEM ADAPTORS NPTF THREAD: PP050821W: 1/4" OD x 1/8" NPTF STEM ADAPTOR, PP050822W: 1/4" OD x 1/4" NPTF STEM ADAPTOR, PP051222W: 3/8" OD x 1/4" NPTF STEM ADAPTOR, PP051223W: 3/8" OD x 3/8" NPTF STEM ADAPTOR, PP051623W: 1/2" OD x 3/8" NPTF STEM ADAPTOR, PP051624W: 1/2" OD x 1/2" NPTF STEM ADAPTOR. STEM REDUCER: PP061208W: 3/8" STEM OD x 1/4" TUBE OD STEM REDUCER, PP061210W: 3/8" STEM OD x 5/16" TUBE OD STEM REDUCER, PP061612W: 1/2" STEM OD x 3/8" TUBE OD STEM REDUCER, PP062008W: 5/8" STEM OD x 1/4" TUBE OD STEM REDUCER, PP062012W: 5/8" STEM OD x 3/8" TUBE OD STEM REDUCER, PP062016W: 5/8" STEM OD x 1/2" TUBE OD STEM REDUCER. THREE WAY DIVIDER: PP491208W: 3/8" INLET OD x 1/4" TUBE OUTLET OD THREE WAY DIVIDER. PLUG: PP0808W: 1/4" STEM OD PLUG, PPM0808W: 5/16" STEM OD PLUG, PP0812W: 3/8" STEM OD PLUG, PP0816W: 1/2" STEM OD PLUG. TUBE TO HOSE STEM: PP251212W: 3/8" STEM OD 3/8" HOSE ID TUBE TO HOSE STEM, PP251216W: 3/8" STEM OD 1/2" HOSE ID TUBE TO HOSE STEM, PP251612W: 1/2" STEM OD 3/8" HOSE ID TUBE TO HOSE STEM, PP251616W: 1/2" STEM OD 1/2" HOSE ID TUBE TO HOSE STEM. UNEQUAL TWO WAY DIVIDER: PP241208W: 3/8" OD x 1/4" OD UNEQUAL DIVIDER. TWO WAY DIVIDER: PP2312W: 3/8" INLET OD x 3/8" TUBE OUTLET OD TWO WAY DIVIDER. END STOP: PP4608W: 1/4" END STOP. POLYPROPYLENE FITTINGS (METRIC): EQUAL STRAIGHT CONNECTOR: PPM0408W: 8MM OD EQUAL STRAIGHT CONNECTOR, PPM0412W: 12MM OD EQUAL STRAIGHT CONNECTOR. REDUCING STRAIGHT CONNECTOR: PPM201512W: 15MM OD x 12MM OD REDUCING STRAIGHT CONNECTOR. EQUAL ELBOW: PPM0308W: 8MM OD EQUAL ELBOW, PPM0312W: 12MM OD EQUAL ELBOW. STEM ELBOW: PPM220808W: 8MM STEM OD x 8MM TUBE OD STEM ELBOW, PPM221212W: 12MM STEM OD x 12MM TUBE OD STEM ELBOW. EQUAL TEE: PPM0208W: 8MM OD EQUAL TEE, PPM0212W: 12MM OD EQUAL TEE. STEM REDUCER: PPM061512W: 15MM STEM OD x 12MM TUBE OD STEM REDUCER. PLUG: PPM0808W: 8MM STEM OD PLUG. EQUAL TWO WAY DIVIDER: PPM2312W: 12MM INLET OD x 12MM TUBE OUTLET OD EQUAL TWO WAY DIVIDER. NPT FIXED TEE ADAPTOR: PP641223W: 3/8 x 3/8 x 3/8 NPT FIXED TEE ADAPTOR. FEMALE CONNECTOR: PP6008U9W: 1/4"x 9/16-24 FEMALE CONNECTOR. BRASS FEMALE COUPLER: NC2258: 3/8" x 3/4 hose BRASS FEMALE COUPLER. CONNECTOR: NC2301: 1/2" superseal-15mm CONNECTOR.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303363

Size:

see model

Marking:

Mingshi Logo, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Approval Holder:

Zhejiang Mingshi Stainless Steel Co.,Ltd.

Company Name

Zhejiang Mingshi Stainless Steel Co.,Ltd.

Address

Huxi Village, Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province

Country

China

View All Listings by this Company