Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Sita, model, size, pressure and product info on label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/03/2030

Model:

AL-AL2 Series UV 107 UV 403 UV 405 UV 405C UV 412 UV 440 LCD Series UV 405 LCD UV 405 LCD PLUS UV 412 LCD UV 412 LCD PLUS UV 440 LCD UV 440 LCD PLUS UV 450 LCD UV 480 LCD UV 480 LCD PLUS UV 550 LCD UV 550 LCD PLUS UV 80/2 LCD UV 80/2 LCD PLUS RACK LCD Series UV 80/3 RACK LCD UV 80/3 RACK LCD PLUS UV 80/4 RACK LCD UV 80/4 RACK LCD PLUS UV 80/5 RACK LCD UV 80/5 RACK LCD PLUS AM Series UV AM 24 UV AM 24 PLUS UV AM 50 UV AM 50 PLUS UV AM 60 UV AM 60 PLUS UV AM 96 PLUS UV AM 125 PLUS UV AM 160 PLUS IT Series UV 4 IT (PLUS) UV 10 IT (PLUS) UV 40 IT (PLUS) UV 80 IT (PLUS) 440 Series UV 440/1 (ST/ECO) (PLUS) UV 440/2 (ST/ECO) (PLUS) UV 440/3 (ST/ECO) (PLUS) UV 440/4 (ST/ECO) (PLUS) UV 440/5 (ST/ECO) (PLUS) UV 440/6 (ST) (PLUS) UV 440/8 (ST) (PLUS)

Product Images

Approval Holder:

SITA S.r.l.

Company Name

SITA S.r.l.

Address

Via Rivarolo 61, 16161 Genova, Italy

View All Listings by this Company

Manufacturer:

SITA S.r.l.

Company Name

SITA S.r.l.

Address

Via Rivarolo 61, 16161 Genova, Italy

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

ESCO International, model, size, pressure and product info on label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/03/2030

Model:

ECO-05, ECO-10, ECO-20, ECO-30, ECO-45, ECO-60, ECO-85 ECO-20LCD, ECO-20LCD-P ECO-45LCD, ECO-45LCD-P ECO-60LCD, ECO-60LCD-P ECO-75LCD ECO-85LCD, ECO-85LCD-P EC0-100LCD, ECO-100LCD-P ECO-200LCD, EC200LCD-P EC1-20R-LCD, EC1-20R-LCD-P EC1-30R-LCD, EC1-30R-LCD-P EC1-40R-LCD, EC1-40R-LCD-P AML24R-LCD, AML24R-LCD-P AML50R-LCD, AML50R-LCD-P AML60R-LCD, AML60R-LCD-P AML96-P AML125-P AML160-P UV4IT, UV10IT, UV40IT, UV80IT EC400-1 (TS/ECO), EC400-2 (TS/ECO), EC400-3 (TS/ECO), EC400-4 (TS/ECO), EC400-5 (TS/ECO), EC400-6 (TS/ECO), EC400-8 (TS/ECO) SIZE: 1/8" 1/2"M 3/4"M 1"M 1 1/2"M 2"M DN80 DN100 DN150 DN200 DN250

Approval Holder:

Esco International

Company Name

Esco International

Address

Unit 8 Cae Ffwt Business Park Pendraw'r Llan Road Glan Conwy

Country

LL28 5SP

View All Listings by this Company

'IUPITAL F30-EW'. Natural, (appears white coloured - opaque), injection moulded POM material. For use with water up to 85°C.

Section:

5015 Acetal

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250455012

Expiry date:

30/04/2030

Approval Holder:

Global Polyacetal Co., Ltd.

Company Name

Global Polyacetal Co., Ltd.

Address

Shiodome Sumitomo-Building 25F 1-9-2, Higashi-shinbashi, Minato Ward, Tokyo 105-0021

Country

Japan

View All Listings by this Company

'ANUBIT HB-1000'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's TDS 'AE-TDS-023-2021', dated '02.08.2024'. Please note that use of a thinner isn't covered by the scope of this approval. Cure for 40 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250355071

Expiry date:

31/03/2030

Approval Holder:

Anupam Enterprises

Company Name

Anupam Enterprises

Address

113, Park Street 5th Floor, Block-B, Kolkata, 700 016, West Bengal

Country

India

View All Listings by this Company

'Jerlac High Build Bituminous Black'. Factory applied, black coloured bituminous coating. Apply as per manufacturer's work instruction document 'GPC/WI/10' issue no. '01', dated 03/01/2018. Cure for 72 hours@30°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

250255052

Expiry date:

28/02/2030

Approval Holder:

M/S German Polymers and Coatings (PVTE) Limited

Company Name

M/S German Polymers and Coatings (PVTE) Limited

Address

No-18, Othivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu

Country

India

View All Listings by this Company