'Jotaguard VA 5001 Blue`, factory applied, blue coloured, fusion bonded epoxy coating. 'Jotaguard VA 5001 Red`, factory applied, red coloured, fusion bonded epoxy coating was added to the approval in June 2023. Apply both coatings as per Jotun Technical Data Sheet issued 9th November 2015. Cure for 5 minutes@245°C. For use with water up to 85°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2106504

Expiry date:

30/06/2026

Approval Holder:

Jotun Powder Coatings UAE L.L.C

Company Name

Jotun Powder Coatings UAE L.L.C

Address

P.O. Box 51033, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Kubotapowder TK1413F'. Factory applied, grey coloured epoxy resin coating. Apply as per manufacturer's instructions 'GR-294E' dated 2018/10/01. Cure for 20 minutes@180°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2012562

Expiry date:

31/12/2025

Approval Holder:

KUBOTA Corporation

Company Name

KUBOTA Corporation

Address

1-3, Kyobashi 2-chome, Chuo-ku Tokyo, 104-8307

Country

Japan

Phone

+81-90-2492-1627

View All Listings by this Company

‘Karumel EX4412 Blue & Grey’. Factory applied, blue or grey coloured, epoxy resin based powder coating. Apply and cure as per manufacturer’s instructions reference 'PCA-21062901', issued August 2021. For use with water up to 85°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2202500

Expiry date:

28/02/2027

Approval Holder:

KCC Corporation.

Company Name

KCC Corporation.

View All Listings by this Company

'Acrylatik'. Site applied, Acrylate primers available in white, red, blue and black colours. Apply as per manufacturer's instructions 'Appendix No. 1, TU 2316-002-92 872914-2016' dated '11.02.2016'. Cure for 20 minutes@20°C and then 20 minutes@90°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2104548

Expiry date:

30/04/2026

Approval Holder:

LLC 'ShLKZ' Paints Belogorya

Company Name

LLC 'ShLKZ' Paints Belogorya

Address

309295, Belgorod Region, Shebekino, st. Rzhevskoe shosse,16, Floor 1, Office 02

Country

Russian Federation

View All Listings by this Company

'LATTYflon 2790AL'. Cream coloured, PTFE/silicone braided rope with a square cross-section. For use with water up to 23°C. For use only as a gland packing material having been tested at a reduced surface area to volume ratio.

Section:

5100 Gland Packings

Expiry date:

30/04/2026

Approval Holder:

Latty International

Company Name

Latty International

Address

1, Rue Xavier Latty, 28160 Brou

Country

France

Phone

+33 (0) 2 37 44 77 77

View All Listings by this Company