Range of undercounter water chillers with a stainless-steel cooling tank including a drain outlet. Maximum working pressure 3.0 Bar. Maximum operating temperature 38°C.

Section:

2420 Water Coolers

Section Subtitle:

Drinking.

WRAS Approval Number:

2311056

Size:

¼” NFTF (M).

Marking:

HYCO logo on outer casing. Hyco logo, voltage, batch number and other technical information on adhesive label on outer casing.

Installation Requirements:

R001 R150 R170 R511

Expiry date:

30/11/2028

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

SAPUC1, SAPUC2.

Product Images

Approval Holder:

Hyco Manufacturing Ltd.

Company Name

Hyco Manufacturing Ltd.

Address

Unit 1 & 2 Normandy Court, Express Way, West Yorkshire

Postcode

WF10 5NR

Phone

01924 225 200

View All Listings by this Company

Range of combined isolation and drain off valves with brass bodies and EPDM O-rings. Maximum working pressure 16 Bar Maximum operating temperature 65°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:

4001 Components and accessories

Section Subtitle:

Water meters.

WRAS Approval Number:

2311012

Note:

Above ground use only.

Size:

See models.

Marking:

Reliance logo, flow arrow, size, DR and flow arrow on body

Installation Requirements:

R001 R511

Expiry date:

30/11/2028

Model:

TABV250001 3/4” TVA ISOLATOR & DRAIN OFF TABV250005 1” TVA ISOLATOR & DRAIN OFF

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

'PCBIT III HIGHBUILD'. Factory applied, black coloured bituminous coating. Apply as per manufacturer's instructions for use, reference 'PCC/ PC 820' dated 27.11.2023. Cure for 5 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2212572

Expiry date:

31/12/2027

Approval Holder:

PC Chanda & Co. PVT Ltd.

Company Name

PC Chanda & Co. PVT Ltd.

Address

Ravi Auto House, 103 Park Street, 6th Floor, Kolkata 700016

Country

India

View All Listings by this Company

'RAX Cement Mortar'. Factory applied, grey coloured cement mortar. Mix cement:sand:water in a 1:1.5:0.6 weight ratio and apply as per manufacturer's work instructions 'WI-PRD-08', rev. '00', dated '01.02.2023'. Cure for 24 hours@28°C. For use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2311527

Expiry date:

30/11/2028

Approval Holder:

Arabian RAX Company for Manufacturing Limited

Company Name

Arabian RAX Company for Manufacturing Limited

Address

7615, Prince Abdul Aziz Bin Musaid, Al Kharj MODODN Industrial City, Riyadh

Country

Saudi Arabia

View All Listings by this Company

'Valcoat Blue'. Factory applied, blue coloured epoxy coating. Pre-heat the substrate and apply as per manufacturer's TDS with issue '01.04.2023'. Post-cure for 5-7 minutes@180°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2311529

Expiry date:

30/11/2028

Approval Holder:

Rapid Coat Division

Company Name

Rapid Coat Division

Address

A-11/1, Site IV, Madan Mohan Malviya Marg, Sahibabad, UP 201010

Country

India

View All Listings by this Company