Range of MM and MC press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with AIS XPERT multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2309924

Size:

16mm, 20mm,25mm, 32mm (see model codes)

Marking:

AIS, size on the fittings. AIS XPERT, material type & size on the pipe.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Range of PPSU press fittings, dim 16 to 32 mm PPSU Press-elbow 90° 53010 P703.1616 16mm 53030 P703.2020 20mm 53040 P703.2525 25mm 53050 P703.3232 32mm PPSU Press-Tee 55010 P723.161616 55011 P723.162016 55030 P723.202020 55031 P723.201616 55032 P723.201620 55033 P723.202016 55040 P723.252525 55041 P723.251625 55042 P723.252020 55043 P723.252025 55050 P723.323232 55051 P723.322032 55052 P723.322532 55053 P723.322525 PPSU Press-coupling 57010 P733.1616 57030 P733.2020 57031 P733.2016 57040 P733.2525 57041 P733.2516 57042 P733.2520 57050 P733.3232 57052 P733.3225

Pipes 101.16025 AIS MLP PERT/ Al/PERT 16x2-coil, no box 101.16XXX AIS MLP PERT/ Al/PERT 16x2- coil, box 101.20100 AIS MLP PERT/ Al/PERT 20x2,25 - coil, box 101.25050 AIS MLP PERT/ Al/PERT 25x2,5- coil, box 101.32050 AIS MLP PERT/ Al/PERT 32x3- coil, box 102.1600X AIS MLP PERT/ Al/PERT 16x2 -bar 102.2000X AIS MLP PERT/ Al/PERT 20x2,25-bar 102.2500X AIS MLP PERT/ Al/PERT 25x2,5-bar 102.3200X AIS MLP PERT/ Al/PERT 32x3-bar 104.16100 AIS MLP PERT/ Al/PERT 16x2 -coil, no box 104.20100 AIS MLP PERT/ Al/PERT 16x2-coil, no box 104.25050 AIS MLP PERT/ Al/PERT 25x2,5-coil, no box where XXX= length of coil X = length of bar

Approval Holder:

MULTICAPAS INDUSTRIAL SLU

Company Name

MULTICAPAS INDUSTRIAL SLU

Address

C/INDUSTRIAS 4, OF. 10-11 ALCORCÓN MADRID

Postcode

28923

Country

Spain

General Email

emendez@aisoutnovation.com

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101368

Size:

see model

Marking:

Ducco and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Coupling DS2001-15 15mm Equal Coupling DS2001-18 18mm Equal Coupling DS2001-22 22mm Equal Coupling DS2001-28 28mm Equal Coupling DS2001-35 35mm Equal Coupling DS2001-42 42mm Equal Coupling DS2001-54 54mm Adjustable Coupling DS2002-15 15mm Adjustable Coupling DS2002-18 18mm Adjustable Coupling DS2002-22 22mm Adjustable Coupling DS2002-28 28mm Adjustable Coupling DS2002-35 35mm Adjustable Coupling DS2002-42 42mm Adjustable Coupling DS2002-54 54mm 90D Equal Elbow DS2003-15 15mm 90D Equal Elbow DS2003-18 18mm 90D Equal Elbow DS2003-22 22mm 90D Equal Elbow DS2003-28 28mm 90D Equal Elbow DS2003-35 35mm 90D Equal Elbow DS2003-42 42mm 90D Equal Elbow DS2003-54 54mm 90D Plain Elbow-B DS2004-15 15mm 90D Plain Elbow-B DS2004-18 18mm 90D Plain Elbow-B DS2004-22 22mm 90D Plain Elbow-B DS2004-28 28mm 90D Plain Elbow-B DS2004-35 35mm 90D Plain Elbow-B DS2004-42 42mm 90D Plain Elbow-B DS2004-54 54mm 45D Equal Elbow DS2005-15 15mm 45D Equal Elbow DS2005-18 18mm 45D Equal Elbow DS2005-22 22mm 45D Equal Elbow DS2005-28 28mm 45D Equal Elbow DS2005-35 35mm 45D Equal Elbow DS2005-42 42mm 45D Equal Elbow DS2005-54 54mm 45D Plain Elbow-B DS2006-15 15mm 45D Plain Elbow-B DS2006-18 18mm 45D Plain Elbow-B DS2006-22 22mm 45D Plain Elbow-B DS2006-28 28mm 45D Plain Elbow-B DS2006-35 35mm 45D Plain Elbow-B DS2006-42 42mm 45D Plain Elbow-B DS2006-54 54mm Equal Tee DS2007-15 15mm Equal Tee DS2007-18 18mm Equal Tee DS2007-22 22mm Equal Tee DS2007-28 28mm Equal Tee DS2007-35 35mm Equal Tee DS2007-42 42mm Equal Tee DS2007-54 54mm Reducing Tee DS2008-18*15 18mmx15mm Reducing Tee DS2008-22*15 22mmx15mm Reducing Tee DS2008-22*18 22mmx18mm Reducing Tee DS2008-28*22 28mmx22mm Reducing Tee DS2008-35*22 35mmx22mm Reducing Tee DS2008-35*28 35mmx28mm Reducing Tee DS2008-42*28 42mmx28mm Reducing Tee DS2008-42*35 42mmx35mm Reducing Tee DS2008-54*28 54mmx28mm Reducing Tee DS2008-54*35 54mmx35mm Reducing Tee DS2008-54*42 54mmx42mm Female Coupling DS2009-15*Rp1/2 15mmxRp1/2" Female Coupling DS2009-22*Rp3/4 22mmxRp3/4" Female Coupling DS2009-28*Rp1 28mmxRp1" Female Coupling DS2009-35*Rp1 1/4 35mmxRp1-1/4" Female Coupling DS2009-42*Rp1 1/2 42mmxRp1-1/2" Female Coupling DS2009-54*Rp2 54mmxRp2" Rotatable Coupling DS2010-15*G1/2 15mmxG1/2" Rotatable Coupling DS2010-22*G3/4 22mmxG3/4" Rotatable Coupling DS2010-28*G1 28mmxG1" Rotatable Coupling DS2010-35*G1 1/4 35mmxG1-1/4" Item Description Secondary Code Size (OD) Rotatable Coupling DS2010-42*G1 1/2 42mmxG1-1/2" Rotatable Coupling DS2010-54*G2 54mmxG2" Male Coupling DS2011-15*R1/2 15mmxR1/2" Male Coupling DS2011-22*R3/4 22mmxR3/4" Male Coupling DS2011-28*R1 28mmxR1" Male Coupling DS2011-35*R1 1/4 35mmxR1-1/4" Male Coupling DS2011-42*R1 1/2 42mmxR1-1/2" Male Coupling DS2011-54*R2 54mmxR2" Female Elbow DS2012-15*Rp1/2 15mmxRp1/2" Female Elbow DS2012-22*Rp3/4 22mmxRp3/4" Female Elbow DS2012-28*Rp1 28mmxRp1" Female Elbow DS2012-35*Rp1 1/4 35mmxRp1-1/4" Female Elbow DS2012-42*Rp1 1/2 42mmxRp1-1/2" Female Elbow DS2012-54*Rp2 54mmxRp2" Male Elbow DS2013-15*R1/2 15mmxR1/2" Male Elbow DS2013-22*R3/4 22mmxR3/4" Male Elbow DS2013-28*R1 28mmxR1" Male Elbow DS2013-35*R1 1/4 35mmxR1-1/4" Male Elbow DS2013-42*R1 1/2 42mmxR1-1/2" Male Elbow DS2013-54*R2 54mmxR2" Female Tee DS2014-15*Rp1/2 15mmxRp1/2" Female Tee DS2014-22*Rp3/4 22mmxRp3/4" Female Tee DS2014-28*Rp1 28mmxRp1" Female Tee DS2014-35*Rp1 1/4 35mmxRp1-1/4" Female Tee DS2014-42*Rp1 1/2 42mmxRp1-1/2" Female Tee DS2014-54*Rp2 54mmxRp2" Male Tee DS2015-15*R1/2 15mmxR1/2" Male Tee DS2015-22*R3/4 22mmxR3/4" Male Tee DS2015-28*R1 28mmxR1" Male Tee DS2015-35*R1 1/4 35mmxR1-1/4" Male Tee DS2015-42*R1 1/2 42mmxR1-1/2" Male Tee DS2015-54*R2 54mmxR2" Reducer-A DS2016-18*15 18mmx15mm Reducer-A DS2016-22*18 22mmx18mm Reducer-A DS2016-28*22 28mmx22mm Reducer-A DS2016-35*28 35mmx28mm Reducer-A DS2016-42*35 42mmx35mm Reducer-A DS2016-54*42 54mmx42mm Reducer Coupling-B DS20107-18*15 18mmx15mm Reducer Coupling-B DS20107-22*18 22mmx18mm Reducer Coupling-B DS20107-28*22 28mmx22mm Reducer Coupling-B DS20107-35*28 35mmx28mm Reducer Coupling-B DS20107-42*35 42mmx35mm Reducer Coupling-B DS20107-54*42 54mmx42mm

Approval Holder:

Gentler Industrial co., Ltd

Company Name

Gentler Industrial co., Ltd

Address

1F no 986

View All Listings by this Company

Stainless steel press fittings incorporating EPDM ‘O’-rings for above ground use only. To be used with stainless steel 316L pipe (EN 10312). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310360

Size:

See models

Marking:

Ningbo Mingyang logo, size, grade on body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Coupling: VV-C15: 15mm, VV-C22: 22mm, VV-C28: 28mm, VV-C35: 35mm, VV-C42: 42mm, VV-C54: 54mm. Type A 90° elbow: VV-EA9015: 15mm, VV-EA9022: 22mm, VV-EA9028: 28mm, VV-EA9035: 35mm, VV-EA9042: 42mm, VV-EA9054: 54mm. Type A 45° elbow: VV-EA4515: 15mm, VV-EA4522: 22mm, VV-EA4528: 28mm, VV-EA4535: 35mm, VV-EA4542: 42mm, VV-EA4554: 54mm. Type B 90° elbow: VV-EB9015: 15mm, VV-EB9022: 22mm, VV-EB9028: 28mm, VV-EB9035: 35mm, VV-EB9042: 42mm, VV-EB9054: 54mm. Tee joint: VV-T15: 15mm, VV-T22: 22mm, VV-T28: 28mm, VV-T35: 35mm, VV-T42: 42mm, VV-T54: 54mm. Socket type flange transfer adapter: VV-F15: 15mm, VV-F22: 22mm, VV-F28: 28mm, VV-F35: 35mm, VV-F42: 42mm, VV-F54: 54mm. Reducing joint: VV-C2215: 22×15mm, VV-C2815: 28×15mm, VV-C2822: 28×22mm, VV-C3515: 35×15mm, VV-C3522: 35×22mm, VV-C3528: 35×28mm, VV-C4222: 42×22mm, VV-C4228: 42×28mm, VV-C4235: 42×35mm, VV-C5422: 54×22mm, VV-C5428: 54×28mm, VV-C5435: 54×35mm, VV-C5442: 54×42mm. Type B 45° elbow: VV-EB4515: 15mm, VV-EB4522: 22mm, VV-EB4528: 28mm, VV-EB4535: 35mm, VV-EB4542: 42mm, VV-EB4554: 54mm. Nut shift adapter: VV-AI15-1/2": 15mm×1/2, VV-AI22-1/2": 22mm×1/2, VV-AI22-3/4": 22mm×3/4, VV-AI28-1": 28mm×1, VV-AI35-11/4": 35mm×11/4, VV-AI42-11/2": 42mm×11/2, VV-AI54-2": 54mm×2. Female thread convert adapter(conical): VV-CI15-1/2": 15mm×1/2, VV-CI22-1/2": 22mm×1/2, VV-CI22-3/4": 22mm×3/4, VV-CI28-1": 28mm×1, VV-CI35-11/4": 35mm×11/4, VV-CI42-11/2": 42mm×11/2, VV-CI54-2": 54mm×2. Female thread 90°convert elbow(short): VV-EI9015-1/2": 15mm×1/2, VV-EI9022-1/2": 22mm×1/2, VV-EI9022-3/4": 22mm×3/4. Single head clamp reducer: VV-CP2215: 22×15mm, VV-CP2815: 28×15mm, VV-CP2822: 28×22mm, VV-CP3515: 35×15mm, VV-CP3522: 35×22mm, VV-CP3528: 35×28mm, VV-CP4222: 42×22mm, VV-CP4228: 42×28mm, VV-CP4235: 42×35mm, VV-CP5422: 54×22mm, VV-CP5428: 54×28mm, VV-CP5435: 54×35mm, VV-CP5442: 54×42mm. Tee with female thread (conical): VV-TI15-1/2": 15mm×1/2, VV-TI22-1/2": 22mm×1/2, VV-TI22-3/4": 22mm×3/4, VV-TI28-1/2": 28mm×1/2, VV-TI28-3/4": 28mm×3/4, VV-TI28-1": 28mm×1, VV-TI35-11/4": 35mm×11/4, VV-TI42-11/2": 42mm×11/2, VV-TI54-2": 54mm×2. Adjustable joint: VV-A15: 15mm, VV-A22: 22mm, VV-A28: 28mm, VV-A35: 35mm, VV-A42: 42mm, VV-A54: 54mm. Cap: VV-H15: 15mm, VV-H22: 22mm, VV-H28: 28mm, VV-H35: 35mm, VV-H42: 42mm, VV-H54: 54mm. Reducing tee: VV-T2215: 22×15mm, VV-T2815: 28×15mm, VV-T2822: 28×22mm, VV-T3515: 35×15mm, VV-T3522: 35×22mm, VV-T3528: 35×28mm, VV-T4222: 42×22mm, VV-T4228: 42×28mm, VV-T4235: 42×35mm, VV-T5422: 54×22mm, VV-T5428: 54×28mm, VV-T5435: 54×35mm, VV-T5442: 54×42mm. Tee adapter with male thread: VV-TE15-1/2": 15mm×1/2, VV-TE22-1/2": 22mm×1/2, VV-TE22-3/4": 22mm×3/4, VV-TE28-1/2": 28mm×1/2, VV-TE28-1": 28mm×1, VV-TE35-11/4": 35mm×11/4, VV-TE42-11/2": 42mm×11/2, VV-TE54-2": 54mm×2. Male thread convert adapter: VV-CE15-1/2": 15mm×1/2, VV-CE22-1/2": 22mm×1/2, VV-CE22-3/4": 22mm×3/4, VV-CE28-1": 28mm×1, VV-CE35-11/4": 35mm×11/4, VV-CE42-11/2": 42mm×11/2, VV-CE54-2": 54mm×2. Female thread 90°elbow (long): VV-EAI9015-1/2": 15mm×1/2, VV-EAI9022-1/2": 22mm×1/2, VV-EAI9022-3/4": 22mm×3/4, VV-EAI9028-1": 28mm×1, VV-EAI9035-11/4": 35mm×11/4, VV-EAI9042-11/2": 42mm×11/2, VV-EAI9054-2": 54mm×2. Male thread 90°elbow (long): VV-EAE9015-1/2": 15mm×1/2, VV-EAE9022-1/2": 22mm×1/2, VV-EAE9022-3/4": 22mm×3/4, VV-EAE9028-1": 28mm×1, VV-EAE9035-11/4": 35mm×11/4, VV-EAE9042-11/2": 42mm×11/2, VV-EAE9054-2": 54mm×2.

Product Images

Approval Holder:

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Company Name

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Address

No. 255, Buzheng East Road, Wangchun Industrial Park, Haishu District, Ningbo, Zhejiang

View All Listings by this Company

Manufacturer:

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Company Name

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Address

No. 255, Buzheng East Road, Wangchun Industrial Park, Haishu District, Ningbo, Zhejiang

View All Listings by this Company

AMEX-10 Vario internal pipe repair kit incorporating stainless steel retaining rings and EPDM seal. Maximum operating temperature 23°C.

Non-metallic materials and components comply with BS6920 at 23°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2309052

Size:

DN 600.

Marking:

Marking: AMEX-10 on internal face of seal.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

AMEX-10 Vario seal.

Approval Holder:

Planned Maintenance (Pennine) Ltd

Company Name

Planned Maintenance (Pennine) Ltd

Address

Bentley Wood Way Burnley

Postcode

BB11 5ST

View All Listings by this Company

Manufacturer:

Planned Maintenance (Pennine) Ltd

Company Name

Planned Maintenance (Pennine) Ltd

Address

Bentley Wood Way Burnley

Postcode

BB11 5ST

View All Listings by this Company

Range of water meters with brass bodies, plastic transducers, and EPDM O-rings. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

¾”, 1”, 1¼”, 1½”, 2”, 2½” BSP (M)

Marking:

Integra logo, model, flow arrow, size and other technical information on case.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

TOPAS SONIC TSO DN15 TOPAS SONIC TSO DN20 TOPAS SONIC TSO DN25 TOPAS SONIC TSO DN32 TOPAS SONIC TSO DN40 TOPAS SONIC TSO DN50

Approval Holder:

INTEGRA Metering SAS

Company Name

INTEGRA Metering SAS

Address

18 avenue Escadrille Normandie Niemen BLAGNAC

Postcode

31700

Country

France

Phone

+33 561 112 356

General Email

seda.bourneuf@im-ultrasonic.com

View All Listings by this Company

Manufacturer:

INTEGRA Metering SAS

Company Name

INTEGRA Metering SAS

Address

18 avenue Escadrille Normandie Niemen BLAGNAC

Postcode

31700

Country

France

Phone

+33 561 112 356

General Email

seda.bourneuf@im-ultrasonic.com

View All Listings by this Company

‘JS’ range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:

1505 Water Meters

Size:

1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)

Marking:

Apator Powogaz and year of manufacture on dial face. Flow arrow cast on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Water meters JS6.3, JS10 and JS16 - DN25, DN32 and DN40

Product Images

Approval Holder:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1c Jaryszki

Postcode

62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1c Jaryszki

Postcode

62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Range of ultrasonic water meters with brass bodies and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1505 Water Meters

Size:

¾”BSP(M)

Marking:

Huizhong logo etched on face plate.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

SCL-61H-100-E DN15, DN20, DN25, DN32, DN40

Product Images

Approval Holder:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Manufacturer:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Water meter with a plastic body and working chamber incorporating and EPDM ‘O’-ring, NBR ‘O’-ring and seal. Maximum working pressure 16.0 bar. Cold Water use only.

Section:

1505 Water Meters

Size:

1½” BSP (M) inlet/outlet.

Marking:

Elster logo or Honeywell logo, pressure, size and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

DN15 V210P (36RPL CHAMBER).

Product Images

Approval Holder:

Elster Water Metering Limited

Company Name

Elster Water Metering Limited

Address

130 Camford Way Sundon Park Luton

Postcode

LU3 3AN

Country

United Kingdom

Phone

01582 846 400

General Email

matthew.ward@honeywell.com

View All Listings by this Company

Range of water meters with brass bodies, with integral plastic strainer and EPDM ‘O’- rings. The product is supplied with an optional combined plastic washer and stainless-steel strainer for installation on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

DIEHL, maximum pressure, ALTAIR, year of manufacture (YYYY) and other product information on the dial face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

25/260 (ALTAIR V4 Type A2 DN25): 1¼” BSP (M) inlet and outlet, 32/260 (ALTAIR V4 Type A2 DN32): 1½” BSP (M) inlet and outlet.

Product Images

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Range of water meters with plastic or brass bodies, incorporating EPDM O-rings. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

DN15 - ¾” BSP (M) DN25 - 1 ¼” BSP (M) DN40 – 2” BSP (M)

Marking:

Baylan, model and technical info on upper body. Flow arrow on lower body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

AK-411 DN15, DN20, DN25, DN32, DN40 AK-411P DN15, DN20, DN25, DN32, DN40

Approval Holder:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Manufacturer:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company