Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250404717

Manually adjustable pressure reducing valve with nickel plated, DZR brass body for use with copper pipe (manufactured to EN1057). Maximum supply pressure 16.0 bar. Outlet pressure range between 1.0 & 6.0 bar. Factory pre-set at 3 bar. Maximum operating temperature 85°C.

Section:: 2200 Valves
Section Subtitle:: Pressure reducing.
WRAS Approval Number:: 250404717
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 22mm compression
Marking:: "TOWER" logo, flow arrow, CR & date of manufacture (MM-YY) on valve body
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: PRVG

Approval Holder:: TFC Group

Company Name
TFC Group
Address
Vale Rise Tonbridge Kent
Postcode
TN9 1TB
Country
United Kingdom
Phone
+44 (0) 800

View All Listings by this Company

WRAS Approval Number: #2105058

Range of pressure reducing valves with DZR brass bodies (CW602N or CW511L), EPDM ‘O’-rings and a stainless steel strainer. Available with a variety of end connections (see model). Models with compression, pressfit and pushfit connections are for use with copper pipe. Maximum inlet supply pressure 16.0 bar. Maximum outlet pressure between 1.5 bar and 6.0 bar. Maximum operating temperature 80°C.

Section:: 2200 Valves
Section Subtitle:: Pressure reducing.
WRAS Approval Number:: 2105058
Size:: PRVCC 15mm & 22mm PRVFF 1/2" & 3/4" Female PRVMM 1/2" & 3/4" Male PRVPUF 15mm & 22mm with Push fit end PRVPRF 15mm & 22mm with Press fit end
Marking:: Valtech, DN, PN and flow arrow on body. CW602N models are also marked CR. CW511L are also marked low lead CR.
Installation Requirements:: R001
Expiry date:: 31/05/2026
Model:: PRVCC & PRVFF & PRVMM & PRVPUF & PRVPRF.

Approval Holder:: Ningbo Valtech Flow Control Co.LTD

Company Name
Ningbo Valtech Flow Control Co.LTD
Address
Room 9015 Ningbo Branch of Zhejiang University Science and Technology Park High Tech Zone Ningbo
Country
China

View All Listings by this Company

WRAS Approval Number: #250604709

Range of pilot operated pressure reducing control valves with blue or grey epoxy coated ductile steel bodies. Maximum supply pressure: 20.0 bar. The product is available with the following adjustable outlet pressures: between 1.0 and 7.0 bar or between 4.0 and 12.0 bar. Maximum operating temperature: 85°C.

Section:: 2205 Valves
Section Subtitle:: Pressure reducing, pilot operated.
WRAS Approval Number:: 250604709
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ‘XX’ Denotes: Flanged size – DN50 (50), DN65 (65), DN80 (80), DN100 (100), DN150 (150). DN200 (200), DN250 (250), DN300 (300).
Marking:: Z-Tide, size, flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: W-BFR-DS-XX, W-BFR-CS-XX, W-BFR-S-XX.

Product Images

Approval Holder:: Elite Line Industrial Corporation.

Company Name
Elite Line Industrial Corporation.
Address
No.40, Jialing Str., Cianjhen District, Kaohsiung 80656
Country
Taiwan R.O.C.
Phone
+886 7 3311060
General Email
sales@z-tide.com

View All Listings by this Company

WRAS Approval Number: #250404711

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 250404711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #250515015

Range of spherical valves with brass or DZR brass bodies, chromium plated brass or chromium plated DZR brass (12-18mm) or stainless-steel balls (22-54mm) and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250515015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 12-54mm press-fit.
Marking:: Pressure, Size & CR on body. Crane logo, Pressure Model and product info on lever or lockshield cap.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: Crane D172A.PF - Lever handle. Crane D172AEXS.PF – Lever handle with extension stem. Crane D172ALS.PF- Lockshield handle. Crane D172AT.PF – T- handle

Approval Holder:: Crane Ltd

Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company