Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of Achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005

Expiry date:

31/01/2031

Approval Holder:

LECICO Plc.

Company Name

LECICO Plc.

Address

2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD

Postcode

MK410QB

General Email

jrichards@lecico.co.uk

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

260402002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

‘Justlink’ (brand of Yuhuan Jianglin Plumbing Hose & Parts Inc.), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2031

Model:

JL–A*B–XX–D–E–XXX. Where: A*B denotes connection size and type and can be replaced with any of the following options under each DN size (see below). XX denotes bore diameter of hose and can be replaced with any of the following: 06 = DN6, 08 = DN8, 10 = DN10, 13 = DN13, 19 = DN19. D denotes the outer braided material: SS = stainless steel wire SN = stainless steel wire plus black nylon wire N = Nylon wire E denotes the liner material: 0 = EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number, as examples: 015 = 15cm length, 100 = 100cm length, 200 = 200cm length. Size Codes: DN6 (denoted by 06) bore diameter available with the following end connections: 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 26 = F15, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring. DN8 (denoted by 08) bore diameter available with the following end connections: 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN10 (denoted by 10) bore diameter available with the following end connections: 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN13 (denoted by 13) bore diameter available with the following end connections: 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 37 = 15mm pushfit, 38 = 22mm pushfit, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN19 (denoted by 19) bore diameter available with the following end connections: 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 19 = M8*(12-110) with single O-ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 32 = 22mm compression, 34 = 22mm compression isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve.

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of concealed flow controls (brass body with various finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260102015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

½” captive nut end connections.

Marking:

Vola on operating member

Installation Requirements:

R001 R007 R009 R010 R040

Expiry date:

31/01/2031

Model:

VOLA BK2, VOLA BK2A & VOLA BK2B VOLA BK2 – Mixer with Adjustable Bracket and water collection box VOLA BK2A – Mixer with Bracket VOLA BK2B – Mixer Alone Models with Brass and Stainless Steel operating members. Brass and Stainless Steel handles are available with different surface finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper. For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed Copper, B69=Brushed Silver, B70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Model:

RNDSCBV2.MB AQ150BAR2 300RSC TWBAR2.21 AQ150BAR2.MB TS150BAR2 126HP 126HP.MB AQSQBAR2 TSSQBAR2 408HP 300SSC AQSQBAR2.MB

Notes & Further Information

The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Notes & Further Information

* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:

WINSDRUM Technology (Foshan) Co., Ltd

Company Name

WINSDRUM Technology (Foshan) Co., Ltd

Address

Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province

Country

China

Phone

0086-19527590441

General Email

carina07@126.com

View All Listings by this Company

Range of gate valves with blue epoxy coated ductile iron bodies and EPDM wedges. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

240402093

Size:

DN40, 50, 60, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600 flanged inlet and outlet.

Marking:

T.I.S, size, PN and product info on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

A20-29-PN10/16 Series 14/15 BS5163 type A/B

Approval Holder:

T.I.S Service SpA

Company Name

T.I.S Service SpA

Address

Via Lago d'Iseo 4/6 24060 Bolgare (Bergamo) Italy

View All Listings by this Company

Range of gate valves incorporating blue epoxy coated ductile iron bodies. EPDM coated ductile iron wedges and a non-rising spindle headwork. Some models incorporate a bypass. Maximum working pressure 16.0 bar. Maximum operating temperature 45°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260188006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

AVK, PN and DN on both the body and label on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

2105035#140069 2108035#140069 2110035#140069 2115035#140069 2120035#140069 2125035#140069 2130035#140069 2135035#140069 2140035#140069 Where # is: 2 – Clockwise to close, fitted with BS 5163 stemcap (white insert) (All sizes) 3 - Clockwise to open, fitted with BS 5163 stemcap (red insert) (All sizes) G – Clockwise to close, fitted with BS 5163 stemcap (white insert), Bypass fitted (DN350+400 ONLY) H - Clockwise to open, fitted with BS 5163 stemcap (red insert), Bypass fitted (DN350+400 ONLY)

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Manufacturer:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

‘Safecure Super’. White coloured, spray applied SBR latex solution intended to act as a concrete curing membrane. Apply as per manufacturer`s 'Tech Data Sheet no. 306', 'Revision no. v4', dated '02.01.2026'. Cure for 14 days at 25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5057 Concrete, Cement and Mortar

Section Subtitle:

Curing compounds.

WRAS Approval Number:

260155016

Expiry date:

31/01/2031

Approval Holder:

Adomast Manufacturing Ltd.

Company Name

Adomast Manufacturing Ltd.

Address

Units 1 & 2 Barkston Road, Carlton Industrial Estate, Barnsley

Postcode

S71 3HU

View All Listings by this Company

'PPE HY3140GYellow' & 'PPE HY3140GBlack'. Yellow or black coloured, injection moulded PPE materials. For use with water up to 85°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

260155026

Expiry date:

31/01/2031

Approval Holder:

Hunan Henyl Advanced Materials Co., Ltd.

Company Name

Hunan Henyl Advanced Materials Co., Ltd.

Address

Xianghong Industrical Park, Xinhua Economic and Technological Development Zone, Loudi City, Hunan 417600

Country

China

View All Listings by this Company

'Smart S-IRV'. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 10:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 14/0141’, dated ‘29/11/2023’. For use with water up to 23°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 14/0104’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:

5311 Resin Anchors

Expiry date:

30/06/2030

Approval Holder:

PGB-Polska

Company Name

PGB-Polska

Address

Ul. Fryderyka Wilhelma Redena 3, 41-807 Zabrze

Country

Poland

View All Listings by this Company