'Resichem 507 DWPU Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDS507DWPU.rv4.09062022'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205552

Expiry date:

31/05/2027

Approval Holder:

Resimac Ltd.

Company Name

Resimac Ltd.

Address

Unit B, Park Barn Estate, Station Road, Topcliffe, Thirsk

Postcode

YO7 3SE

View All Listings by this Company

'Ferrimax 30'. Grey coloured, sintered Strontium Ferrite magnet. For use with water up to 70°C.

Section:

5165 Magnetic Material

Expiry date:

31/10/2027

Approval Holder:

MPI Magneti Permanenti Industriali Srl.

Company Name

MPI Magneti Permanenti Industriali Srl.

Address

Via G.B. Vico 25/B, 20010 Cornaredo (Milano), Italy

View All Listings by this Company

'Zytel® 70G30HSLR BK099'. Black coloured, injection moulded nylon. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2206517

Expiry date:

30/06/2027

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company

'Tecomid NB30 GR50 BK012 QW'. Black coloured, injection moulded PA6 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2206520

Expiry date:

30/06/2027

Approval Holder:

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Company Name

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Address

Karamehmet Mah. Avrupa Serbest Bolgesi, Avrasya Bulvari No: 8, TR 59930 Ergene

Country

Turkey

View All Listings by this Company

‘Radilon A RV300RKC 106 NT, A RV300RKC2 106 NT, A RV500RKC2 106 NT & A RV500RKC 106NT’ ‘Radilon A RV300RKC 306 BK, A RV500RKC 306 BK, A RV300RKC2 306 BK & A RV500RKC2 306 BK’. ‘NT’ indicates that the grade is natural (which appears beige in colour). BK indicates that the grade is black coloured. Injection moulded PA66 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2207511

Expiry date:

31/07/2027

Approval Holder:

Radici Novacips SpA

Company Name

Radici Novacips SpA

Address

Via Bedeschi 20, 24040 Chignolo D'Isola (Bg)

Country

Italy

Phone

+39 35 4991303

General Email

ats.plastics@radicigroup.com

View All Listings by this Company