Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2304088

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 2304088
Size:: See Models
Marking:: BOSS, CR and size on body (DZR Brass Models) BOSS and size on body (Brass Models)
Installation Requirements:: R001 R511
Expiry date:: 30/04/2028
Model:: DZR Brass Models: 27200107 - Drain Cock DZR Type A Long Tail (15mm Spigot) Brass Models (can be chrome plated or not): 27200118 - FIG 372CP Chrome Plated Drain Off Cock (15mm Spigot)

Approval Holder:: BSS Industrial

Company Name
BSS Industrial
Address
Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

WRAS Approval Number: #2307035

Range of stainless steel braided PEX lined flexible hose assemblies, incorporating EPDM O-Rings and gaskets. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2307035
Size:: See model.
Marking:: M.R.G., size, year of manufacture (YY), WRAS, temperature and pressure on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 31/07/2028
Model:: *T157DIDG.XXXX: DN6 bore - M8x1 x ⅜" captive nut. *T1070IDG.XXXX: DN6 bore - M8x1 x ⅜" captive nut. *T154DIDG.XXXX: DN6 bore - M10x1 short x F14 captive nut. *T2013IDGC.XXXX: DN8 bore - M10x1 short x ½" captive nut. Where XXXX denotes length of hose: 200-2000mm. e.g. *T157DIDG.200 = 200mm length hose.

Product Images

Approval Holder:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 Gozzano
Postcode
28024
Country
Italy
Phone
+39 0322 94131
General Email
info@mrgspa.com

View All Listings by this Company
Manufacturer:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 Gozzano
Postcode
28024
Country
Italy
Phone
+39 0322 94131
General Email
info@mrgspa.com

View All Listings by this Company

WRAS Approval Number: #2306017

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306017
Size:: Please refer to model.
Marking:: Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: UKWR denotes the customer code and is replaced with XX. L denotes the length of the hose (between 50mm & 4,000mm) and is replaced with L50 to L4000. DG10E-UKWR-001-L (15mm compression x M10) - Bore size DN8. DG10E-UKWR-002-L (15mm compression x M12) - Bore size DN8. DG10E-UKWR-003-L (10mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-004-L (15mm compression x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-005-L (F ½" BSP X F ½" BSP) - Bore size DN10. DG10E-UKWR-006-L (15mm compression iso valve x F ½"BSP) - Bore size DN10. DG10E-UKWR-007-L (15mm push fit iso valve x 15mm push fit) - Bore size DN10. DG10E-UKWR-008-L (22mm compression iso valve x F ¾" BSP) - Bore size DN13. DG10E-UKWR-009-L (22mm x F ¾" BSP) - Bore size DN13. DG10E-UKWR-011-L (15mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-012-L (15mm compression x F ½" BSP) - Bore size DN10. DG10E-UKWR-013-L (15mm compression x 10mm compression) - Bore size DN10. DG10E-UKWR-015-L (15mm compression x 15mm compression) - Bore size DN10. DG10E-UKWR-014-L (15mm compression x F ¾" BSP) - Bore size DN10. DG10E-UKWR-016-L (15mm compression x 22mm compression) - Bore size DN10. DG10E-UKWR-017-L (F ½” BSP x 22mm compression) - Bore size DN10. DG10E-UKWR-018-L (15mm compression iso valve x F ¾" BSP) - Bore size DN10. DG10E-UKWR-019-L (15mm push fit x M10) - Bore size DN10. DG10E-UKWR-020-L (15mm push-fit x M12) - Bore size DN10. DG10E-UKWR-021-L (15mm push-fit x F ¾" BSP) - Bore size DN10. DG10E-UKWR-022-L (15mm push fit x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-023-L (15mm push-fit x 15mm compression) - Bore size DN10. DG10E-UKWR-024-L (15mm push-fit x 15mm push fit) - Bore size DN10. DG10E-UKWR-025-L (F ¾" BSP x F ¾" BSP) - Bore size DN13. DG10E-UKWR-026-L (22mm compression x 22mm compression) - Bore size DN13. DG10E-UKWR-029-L (F ½” x M10) - Bore size DN8. DG10E-UKWR-030-L (F ⅜” x M10) - Bore size DN8. DG10E-UKWR-031-L (15mm compression iso valve x 15mm compression) - Bore size DN10. DG10E-WRAS-034-L (F3/4” x F3/4” elbow) - Bore size DN10. DG10E-QY-007-L (F ⅜” x F⅜”) - Bore size DN8. DG10E-QY-008-L (F⅜” x F⅜” elbow) - Bore size DN8. DG10E-834-001-L (F⅜" X F¼") - Bore size DN8. DG10E-UKWR-032-L (F½" x M½") - Bore size DN13, DG10E-UKWR-033-L (15mm x M½") - Bore size DN13, DG10E-UKWR-035-L (F¾" x M¾") - Bore size DN13 & DG10E-UKWR-036-L (F½" x F½" Elbow) - Bore size DN10. DG10E-WRAS-038-L (F½" x M½") - Bore size DN8 DG10E-XC-002-L (F½" BSP X F½" BSP) - Bore size DN8 DG10E-A007010-028-L(F1/2”X15mm compression iso valve)-Bore size DN13 DG10E-EWT-003-L(F1/2”XF1/2”)-Bore size DN13 DG10E-A007010-027-L(F1/2”X15mm)-Bore size DN13 DG10E-A007119-019-L(22mm X 22mm with iso valve)-Bore size DN13 DG10E-A007010-037-L(15mm X 15mm)-Bore size DN13 DG10E-A007010-013-L(15mm X M12x1 Short)-Bore size DN10 DG10E-SCS-001-L(F1/2”X14.7mm with iso valve) - Bore size DN10 DG10E-SCS-002-L(F3/4”X21mm with iso valve)-Bore size DN13 DG10E-A007010-014-L(15mm X M12x1 Long)-Bore size DN10 DG10E-TECH-001-L (F1/2"XM12)-Bore size DN8.

Product Images

Approval Holder:: Fanski Group Inc

Company Name
Fanski Group Inc
Address
NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc

Company Name
Fanski Group Inc
Address
NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600
Country
China

View All Listings by this Company

WRAS Approval Number: #2103345

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103345
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: MSL, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: BFFTCW-1510 BFFTCW-1510500 BFFTCW-1512 BFFTCW-1512500 BFFTCW-10D500 BFFTCW-10D900 BFFTCW-12D500 BFFTCW-12D900 BFFTCW-DD500 BFFTCW-DD900 BFFTCWIV-10D300 BFFTCWIV-12D300 BFFTCW-1515300 BFFTCW-1515500 BFFTCW-1515900 BFFTCW-15D300 BFFTCW-15D500 BFFTCW-15D900 BFFTCW-15E300 BFFTCW-15E500 BFFTCW-15E900 BFFTCW-2222300 BFFTCW-2222500 BFFTCW-22E300 BFFTCW-22E500 BFFTCW-22E900 BFFTCWIV-15D150 BFFTCWIV-15D300 BFFTCWIV-15D500 BFFTCWIV-15E300 BFFTCWIV-15E500 BFFTCWIV-22E30

Approval Holder:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

WRAS Approval Number: #2012115

Multi-layer shower hose with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012115
Note:: Open outlet use only.
Size:: See model
Marking:: Intatec Logo, WRAS and date of manufacture (MM/YY) on captive nut.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: 800030CP - ½” BSP (F) conical or captive nut.

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

WRAS Approval Number: #2306071

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306071
Size:: Please refer to model.
Marking:: Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: C54400 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ½" BSP C54401 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ¾" BSP C54402 *CB WRAS 30CM FLEX TAP CONNS 22mm X F ¾" BSP C54403 *CB WRAS 50CM FLEX TAP CONNS 15mm X F ½" BSP C54404 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ½"BSP C54405 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ¾" BSP C54406 *CB WRAS ISO FLEX TAP CONS 22mm iso valve x F ¾" BSP C54412 *CB WRAS M10 MONO FLEX TAP CONNS 15mm x M10 C54413 *CB WRAS M12 MONO FLEX TAP CONNS 15mm x M12 C54414 *CB WRAS 30CM FLEX TAP CONNS 15mm x 15mm

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:: Fanski Group Inc

Company Name
Fanski Group Inc
Address
NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #2306072

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306072
Size:: Please refer to model.
Marking:: FLOMASTA (Brand of Kingfisher), WRAS and date of manufacture (YYYY) on crimped sleeve. Models added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: 05272204 (15mm compression x M10) - Bore size DN8. 05272198 (15mm compression x M12) - Bore size DN8. 05272310 (F ½" BSP X F ½" BSP) - Bore size DN10. 05272174(15mm compression iso valve x F ½"BSP) - Bore size DN10. 5052931708345 (22mm compression iso valve x F ¾" BSP) - Bore size DN13. 05272150, 05272167 (22mm x F ¾" BSP) - Bore size DN13. 05272181 (15mm compression x F ⅜" BSP) - Bore size DN10. 05272228 (15mm compression x F ½" BSP) - Bore size DN10. 05272402 (15mm compression x 10mm compression) - Bore size DN10. 05272242 (15mm compression x 15mm compression) - Bore size DN10. 05272327 (15mm compression x F ¾" BSP) - Bore size DN10. 05272280 (15mm compression x 22mm compression) - Bore size DN10. 5052931708352 (15mm compression iso valve x F ¾" BSP) - Bore size DN10. Models Added December 2023: 05272334, 05272372, 05272396 (22mmxF3/4" BSP)-Bore size DN13. 5052931675531,, 05272303, 05272358, 05272389, 5052931675548 (15mm compression xF½"BSP)- Bore size DN10. 05272365 (15mm compressionxF"BSP) Bore size DN10. 5052931462629, 05272273, 05272341(15mm compressionx15mm compression)- Bore size DN10. 05280469 (F ½"BSPXF½"BSP)-Bore size DN10. 05272266 (15mm compression iso valve xF½"BSP)- Bore size DN10.

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2303074

Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2303074
Marking:: Hansgrohe on conical nut.
Installation Requirements:: R001
Expiry date:: 31/03/2028
Model:: 30 334 118 Hansgrohe Metaflex'C 800mm chrome, 28 152 xxx Hansgrohe Mariflex showerhose 1250mm, 28 262 xxx Hansgrohe Metaflex C showerhose 1250mm chrome, 28 644 xxx Hansgrohe Metaflex Shower hose 1250mm, 30 475 518 Hansgrohe Metaflex C showerhose 1250mm, 28 153 xxx Hansgrohe Mariflex showerhose 1500mm, 28 263 xxx Hansgrohe Metaflex C showerhose 1500mm, 28 645 xxx Hansgrohe Metaflex Shower hose 1500mm, 28 266 xxx Hansgrohe Metaflex C showerhose 1600mm chrome, 30 475 618 Hansgrohe Meta showerhose 1600mm, 31 475 618 Hansgrohe Metaflex C 1600mm, 28 155 xxx Hansgrohe Mariflex showerhose 1750mm, 28 265 xxx Hansgrohe Metaflex C showerhose 1750mm, 28 646 xxx Hansgrohe Metaflex Shower hose 1750mm, 30 511 718 Hansgrohe Metaflex showerhose 1750mm, 28 154 xxx Hansgrohe Mariflex showerhose 2000mm, 28 264 xxx Hansgrohe Metaflex C showerhose 2000mm chrome, 28 647 xxx Hansgrohe Metaflex Shower hose 2000mm.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2309035

Range of shower hoses. Model ML-PVC-DCHS01-XX is a PVC hose incorporating EPDM, NBR or Silicone seals. Model ML-SS-SKHS01-XX is a PVC or EPDM lined shower hose incorporating EPDM, NBR or silicone seals with a stainless-steel interlocked outer with (various finishes).

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309035
Note:: Open outlet use only.
Size:: ½” BSP (F)
Marking:: Milan logo, WRAS and date of manufacture on ferrule (YYYY/MM/DD)
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: ML-PVC-DCHS01-XX ML-SS-SKHS01-XX ML-SS-SKHS01-XX XX denotes 01-Golden 02-black 03-Cr-Plated 04-Natural Surface colour and its connectors as below: G1/2, M15X1 ML-PVCDCHS01-XX XX denotes 01-Brushed Gold 02-Silver 03-Black and with connector G1/2”.

Approval Holder:: Ningbo Milan Sanitary Ware Technology Co., Ltd.

Company Name
Ningbo Milan Sanitary Ware Technology Co., Ltd.
Address
West of No. 18, West Industrial Zone 1st Road, Lubu Town, Yuyao City Ningbo,Zhejiang,China

View All Listings by this Company

WRAS Approval Number: #2309310

Range of Stainless steel braided EPDM lined flexible hose assemblies with a variety of brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature: 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2309310
Size:: see model
Marking:: Leading, WRAS, Year of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: LEADING-EPDM-DN8 Available with connections: G3/8(F), G1/2(F), M8x1, M10x1, M12x1, G1/2(M), 15mm LEADING-EPDM-DN10 Available with connections: G3/8(F), G1/2(F), G3/4(F), M10x1, G1/2(M), 15mm LEADING-EPDM-DN13 Available with connections: G1/2(F), G3/4(F), G3/4(M)

Product Images

Approval Holder:: Zhejiang Leading Plumbing Co., Ltd

Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company
Manufacturer:: Zhejiang Leading Plumbing Co., Ltd

Company Name
Zhejiang Leading Plumbing Co., Ltd
Address
No. 550, Jixin Road, Xinqiao, Taizhou, Zhejiang, China

View All Listings by this Company