Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241202033

Range of ceramic cartridge headworks with brass bodies and EPDM gaskets and O-rings. For insertion into specifically dimensioned bores. Maximum working pressure; 5 Bar Maximum operating temperature 60°C

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 241202033
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Ø24.85mm
Marking:: FDL, Serial no. and model on body
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: BF19200, BF19208, BF19208, BF19209, BF19212, BF19214, BF19216, BF19231, BF19232, BF19233, BF19234, BF19235, BF19236, BF19250, BF19258, BF19260, BF19262 BF19263, BF19266, BF19267, BF19271, BF19272, BF19280, BF19282, BF19283, BF19286 & BF19288

Manufacturer:: Fluehs Drehtechnik

Company Name
Fluehs Drehtechnik
Address
Loesenbacher Landstr. 2 58515 Luedenscheid / Germany

View All Listings by this Company

WRAS Approval Number: #241102016

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), models (63792 & 63794) incorporate ceramic cartridge headworks, model (63793 incorporates quarter turn ceramic disc headworks both with single lever operating members. The spout outlet is a pull-out spray type. The inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0445 Combination Tap Assemblies
Section Subtitle:: Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:: 241102016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Lota on rear of tap body.
Installation Requirements:: R001 R009 R090
Expiry date:: 30/11/2029
Model:: 63792-00X 63793-00X 63794-00X X denotes the finish and can be replaced with any of the following: 01 = Chrome, 0111 = Trivalent chromium, 6801 = Matt Black, 4408 = Brushed Brass, 08 = Stainless Steel, 5806 = Titanium, 0412 = Brushed Nickel, 5804 = gun metal.

Approval Holder:: Xiamen Lota International Co., Ltd.

Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:: Xiamen Lota International Co., Ltd.

Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

WRAS Approval Number: #241102074

Range of single-hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), models EMB10CP, EMB10BN, EMB10BB, EMB10MB, EMB10WH, CREPOCP & CREPOBN incorporate ceramic cartridge headworks, model (ARI10CP, ARI10BN, ARI10BB, ARI10MB & ARI10WH incorporates quarter turn ceramic disc headworks both with single lever operating members. The spout outlet is a pull-out spray type. The inlets incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0445 Combination Tap Assemblies
Section Subtitle:: Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:: 241102074
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Clearwater on tap body.
Installation Requirements:: R001 R009 R090
Expiry date:: 30/11/2029
Model:: EMB10CP, EMB10BN, EMB10BB, EMB10MB, EMB10WH, ARI10CP, ARI10BN, ARI10BB, ARI10MB, ARI10WH, CREPOCP & CREPOBN.

Approval Holder:: Clearwater Products Limited t/a Sterling

Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company

WRAS Approval Number: #241104040

Range of single hole, single outlet (fixed) combination tap assembies (stainless steel bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 241104040
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:: Company logo and TSL laser etched on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/11/2029
Model:: TSL.950.CS (Satin), TSL.950.C (Chrome), TSL.950.BK (Black), TSL.950.BR (Brass), TSL.950.CP (Copper), TSL.950.BZ (Bronze).

Approval Holder:: The Splash Lab

Company Name
The Splash Lab
Postcode
SK7 6DA
Phone
0161 482 7000
General Email
info@thesplashlab.com

View All Listings by this Company

WRAS Approval Number: #241103014

Single hole, single outlet fixed combination tap assemblies (chrome plated brass finish), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 241103014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Bristan on tap body
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2029
Model:: CN CDN BASNW C

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company