‘RSG-TW-BWGL, RSG-TW-V-BWGL & RSG-TW-K-BWGL’. Black coloured, compression moulded EPDM sheet materials. Shore hardness 70. Tested in-radius size 1.15mm. For use with water up to 85°C.
'EDW-70'. Black coloured, compression moulded EPDM material. Shore hardness 71 ShA. Tested in-radius size 0.5mm. For use with water up to 60°C.
'03154-70'. Black coloured, compression moulded NBR material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.
'OLDAL VMQ88065TR-70E' (70 shore hardness) & 'OLDAL VMQ88065TR' (80 shore hardness). Unpigmented (appear white, translucent), extruded silicone rubber materials. Tested in-radius size of 2.1mm. For use with water up to 85°C.
'SQ-30T-W, SQ-40T-W, SQ-50T-W, SQ-60T-W, SQ-70T-W, SQ-80T-W, & SQ-90T-W (transparent, unpigmented)'. ‘SQ-30R-W, SQ-40R-W, SQ-50R-W, SQ-60R-W, SQ-70R-W, SQ-80R-W, & SQ-90R-W (red coloured)'. ‘SQ-30B-W, SQ-40B-W, SQ-50B-W, SQ-60B-W, SQ-70B-W, SQ-80B-W, & SQ-90B (blue coloured)'. Range of compression moulded, silicone rubber materials. Shore hardness between 30 & 90. Tested in-radius size 0.9mm. For use with water up to 85°C:
'Weld-On 724 UL VOC CPVC Cement Orange'. Orange coloured solvent cement. Apply as per manufacturer's TDS '724-05-2024'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Range of smart Bidet assemblies with sensor actuated solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 Bar Maximum operating temperature Cold water use only
Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| GT6002R-D-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar | hot/cold water path: 65℃ Boiling water path: 99℃ | GETTAI | On handle | No | Ceramic cartridge | Aerator | Inlet Hoses |
| GT6002R-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar | hot/cold water path: 65℃ Boiling water path: 99℃ | GETTAI | On handle | No | Ceramic cartridge | Aerator | Inlet Hoses |
| GT6024-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar | hot/cold water path: 65℃ Boiling water path: 99℃ | GETTAI | On handle | No | Ceramic cartridge | Aerator | Inlet Hoses |
| GT6616-** | Various | hot/cold water inlet：M10x1, 1/2 BSP(F) Boiling water inlet:M10x1 | hot/cold water path: 10bar Boiling water path:5bar | hot/cold water path: 65℃ Boiling water path: 99℃ | GETTAI | On Body | No | Ceramic cartridge | Aerator | Inlet Hoses |
GT6002R-D-** & GT6002R-** only differ in spout Model code: “**” means different finishes -LC Brushed -LE Polished -MOB Matt Black -BK Steel Black -BS PVD Black -GM Gun Metal -CO Copper -GD Gold -TGD Titanium Gold
WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 Bar
Page 1173 of 1182
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
