Directory Search Results

Print List

#250304709

Electric instantaneous water heater with a plastic casing. Flow is controlled via a solenoid valve operated by an infrared sensor. Temperature is controlled by a dial on the front of the unit. The product incorporates a swivel arm outlet from the base. Maximum working pressure 3.0 bar. Maximum operating temperature 48˚C. Cold supply only.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
250304709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm (plain plastic pipe).
Marking:
REDRING (brand of RK Wholesale Limited) on front casing. REDRING (brand of RK Wholesale Limited), model and model name, maximum static pressure and minimum working pressure on adhesive label side of unit.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
43679902: RAHW3 Autosensor Handwash 3kw white.

Approval Holder:
RK Wholesale Limited.
Company Name
RK Wholesale Limited.
Address
Berry Hill Road, Berryhill Trading Estate
Postcode
ST4 2NL

View All Listings by this Company

Print This Approval


#241202718

Range of near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
241202718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP M inlet/outlet
Marking:
KoGE by Scudo on body
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
KoGE WATER DISPENSERS

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval


#2111391

Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

Section:
1390 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:
2111391
Size:
3/8” BSP
Marking:
Wash Water & company Logo on front of body casing model and other tech info on adhesive label on body
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
2.4L,1500KW:WWHWT24 4L,2300KW:WWHWT40 & WWHWT50

Approval Holder:
WashUK Ltd
Company Name
WashUK Ltd
Address
4a Castle Street, Eye Suffolk
Postcode
IP23 7AB

View All Listings by this Company

Print This Approval


#250304014

Range of heat interface units incorporating a heat exchanger, flow sensor, spherical valve and shock arrestor. The heating circuit incorporates a pressure relief valve set at 3.0 bar. Maximum working pressure & operating temperature: Primary circuit is 16.0 bar & 90°C. Domestic hot water circuit is 10.0 bar & 65°C. Heating circuit is 2.5 bar & 80°C.

Section:
1460 Heaters
Section Subtitle:
Supplied from storage only, gas, thermal storage.
WRAS Approval Number:
250304014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
Switch 2 on front of unit.
Installation Requirements:
R001 R140 R360 R511
Expiry date:
31/03/2030
Model:
ICON Connected HIU’s E1100900, E1100901, E1100902 & E1100903

Manufacturer:
Switch2 Energy Ltd.
Company Name
Switch2 Energy Ltd.
Address
The Waterfront, Salts Mill Road, Shipley
Postcode
BD17 7EZ
Phone
+44 (0) 1274 535 527

View All Listings by this Company

Print This Approval


#250315002

Range of ultrasonic water meters with brass bodies and plastic transducers. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
LXC-15SC: ¾” x ¾” BSP (M) (DN15), LXC-20SC 1” x 1” BSP (M) (DN20), LXC-25SC: 1¼” x 1¼” BSP (M) (DN25).
Marking:
Goldcard Water Technology Co., Ltd logo (‘Goldcard’), model, Q3 2.5, MAP16, IP68 and production date (YYYYMM) on meter face. DN size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
LXC-15SC, LXC-20SC, LXC-25SC.

Approval Holder:
Goldcard Water Technology Co., Ltd
Company Name
Goldcard Water Technology Co., Ltd
Address
No.158 Jinqiao Street Qiantang District, Hangzhou Zhejiang
Postcode
310018
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1163 of 1621

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.