Directory Search Results

Print List

#260101703

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
OBC Concealed Cistern (Category 3)

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#251188002

Two hole, single outlet (swivel) combination tap assembly (brass bodies – various finishes), incorporating non-rising spindle headworks with cross top operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (optional aerator is also supplied) and the product is supplied with a shower hose, shower handset and metal back nuts. Maximum working pressure 10.0Bar Maximum operating temperature 60°C.

Section:
0551 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and swivel spout, incorporating a manual diverter to a shower outlet
WRAS Approval Number:
251188002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M)
Marking:
Burlington on indices (brand of approval holder)
Installation Requirements:
R001 R006 R020
Expiry date:
30/11/2030
Model:
CL15x Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate.

Approval Holder:
Bathroom Brands Group Ltd.
Company Name
Bathroom Brands Group Ltd.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
David.Cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#251002037

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:
0690 Combination Tap Assemblies
Section Subtitle:
Combined bath filler and overflow(s).
WRAS Approval Number:
251002037
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:
BAGNODESIGN LONDON on waste operating member
Installation Requirements:
R001 R576
Expiry date:
31/10/2030
Model:
BDP-WBT-110-90U-A-XX - 900mm 'XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#251116303

Section:
1660 Shower Outlets
Description:
A Shower hose(s)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
DH2118chrome½" conical nutOpen outlet bar65 °CDELMEI, WRAS, Manufacture Date(YYYY)On connectorNo

Approval Holder:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturers:
Xiamen Delmei Sanitary Ware Co., Ltd

Print This Approval


#251115316

Section:
2001 Shower Valves
Description:
A Range of Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.
Wall Mounted Concealed Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
WS3**VariousBSP 1/2" (F)10 bar65 °CKindsleeveNoCeramic cartridgeNot ApplicableNot Applicable

Notes & Further Information

** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Product Images

Approval Holder:
Guangzhou KIND Architecture Material Technology Co., Ltd.
Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

Print This Approval


#251115319

Section:
2011 Shower Valves
Description:
A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Concealed Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
AHT2BSP 1/2" (F)10 bar65 °CKindBodyNo1/2 Turn ceramic discNot ApplicableNot Applicable

Approval Holder:
Guangzhou KIND Architecture Material Technology Co., Ltd.
Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

Print This Approval


#251212017

Range of ceramic cartridge headworks for insertion into specifically dimensioned tap assemblies. Maximum working pressure 12.0 bar Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
251212017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
CITEC (brand name) on body
Installation Requirements:
R001
Expiry date:
31/12/2030
Model:
Side Outlet Cartridge CT-25: 25.07mm, Upper O-ring Cartridge CT-25 Type 1: 26.95mm, Upper O-ring Cartridge CT-25 Type 2: 25.02mm, Side Outlet Cartridge CT-30: 30.01mm, Upper O-ring Cartridge CT-35 FLAT BASE: 35.06mm, Upper O-ring Cartridge CT-35 HIGH BASE: 35.03mm, Upper O-ring Cartridge CT-40 FLAT BASE: 39.99mm, Upper O-ring Cartridge CT-40 HIGH BASE: 39.83mm, Ceramic Cartridge CP-35: 35.12mm, Ceramic Cartridge CP-40: 39.96mm. Models added January 2026: Rotating Cartridge CT-25, 25mm, Rotating Cartridge CT-35, 35mm, Rotating Cartridge CT-40, 40mm.

Approval Holder:
Kaiping Citec Sanitary Components Co.,Ltd.
Company Name
Kaiping Citec Sanitary Components Co.,Ltd.
Postcode
529300
Country
China
Phone
750 2761910
General Email
helenguan@kcitec.com

View All Listings by this Company
Manufacturer:
Kaiping Citec Sanitary Components Co.,Ltd.
Company Name
Kaiping Citec Sanitary Components Co.,Ltd.
Postcode
529300
Country
China
Phone
750 2761910
General Email
helenguan@kcitec.com

View All Listings by this Company

Print This Approval


#251215311

Section:
0442 Thermostatic cartridges
Description:
A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
Plastic body/bodies
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
XB-CT48S00149mm16 bar85 °CTzxinbai, XB-CT48S001BodyNo
XB-CT48S00249mm16 bar85 °CTzxinbai, XB-CT48S002BodyNo
XB-CT48S00349mm16 bar85 °CTzxinbai, XB-CT48S003BodyNo
XB-CT07S34mm16 bar85 °CTzxinbai, XB-CT07SBodyNo
XB-CT27S27mm16 bar85 °CTzxinbai, XB-CT27SBodyNo
XB-CT28S28mm16 bar85 °CTzxinbai, XB-CT28SBodyNo
Product Images

Approval Holder:
TAIZHOU XINBAI SANITARY WARE CO., LTD.
Company Name
TAIZHOU XINBAI SANITARY WARE CO., LTD.
Address
Qinggang Industrial Park, Yuhuan, Taizhou
Country
China

View All Listings by this Company
Manufacturers:
Taizhou Xinbai Sanitary Ware Co., Ltd.

Print This Approval


#251215310

Section:
0450 Combination Tap Assemblies
Description:
A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted. Stainless steel braided, EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TPASHMONO3Chromed1/2" Captive nut10 bar60 °CLecico bathroomsRear of bodyNoCeramic cartridgeC-plateAerator
TPSOUMONO3Chromed1/2" Captive nut10 bar60 °CLecico bathroomsRear of bodyNo1/4 Turn ceramic discC-plateAerator

Approval Holder:
LECICO Plc.
Company Name
LECICO Plc.
Address
2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD
Postcode
MK410QB
General Email
jrichards@lecico.co.uk

View All Listings by this Company

Print This Approval


#251204010

Range of single-hole, single outlet, (fixed) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members.The spout otlet incorporates a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
251204010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Please see models for waste sets – verified by test.
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2030
Model:
74 710 xx0 with pop-up waste set 74 711 xx0 without waste set 74 714 xx0 with metal waste set 74 715 xx0 with push open 74 720 xx0 with pop-up waste set 74 721 xx0 without waste set 74 724 xx0 with push open 74 730 xx0 with pop-up waste set 74 731 xx0 without waste set 74 732 xx0 with push open

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1117 of 1181

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.