Range of electronic pressure switches housed in a plastic body with a ceramic sensor and NBR gaskets and/or ‘O’-rings. The 1091203260 & G0912026 models incorporate a spring-loaded plastic flow restrictor. Maximum working pressure 12.0 bar. Cold water only.

Section:

1720 Switches

Section Subtitle:

Pressure operated.

WRAS Approval Number:

240502064

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

G01912025 GENYO PLUS 16/A RO.5-8 110-230 V 109120250 GENYO PLUS 16/A RO.5-8 110-230 V ¼" BSPP (F). 109120260 GENYO PLUS TKIT 16/A RO.5-8 LOWARA G09120260 GENYO PLUS TKIT 16/A RO.5-8 GWT 1" BSPP (M) X 1" BSPP (F) X 1" BSPP (F).

Marking:

Genyo and product name on body. Model type serial number including date of manufacture (XX - YY/WWW VXX, where W13 would = week 13) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

RANGE OF ELECTRONIC PRESSURE SWITCHES: G01912025 GENYO PLUS 16/A RO.5-8 110-230 V 109120250 GENYO PLUS 16/A RO.5-8 110-230 V 109120260 GENYO PLUS TKIT 16/A RO.5-8 LOWARA G09120260 GENYO PLUS TKIT 16/A RO.5-8 GWT

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of bath pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top operating members. The spout outlet incorporates a plastic aerator and is supplied with metal backnuts. Maximum working pressure 10 Bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

240502003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Mira on body.

Installation Requirements:

R001 R005

Expiry date:

31/05/2029

Model:

2.1819.003 - Mira Revive.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of PE lined, nylon braided (black or grey) flexible hose assemblies. The hoses are available with a variety of end connections with different finishes (see model). Maximum operating temperature 85°C. Open outlet use only.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240502055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

H011R-160101A-NKL1: G1/2*M15x1. H01BR-110101A-BKL1: G1/2*Ø12.7mm. H01BR-110141A-BKL1: G1/2*Ø12.7mm. H01BR-110143A-BKL1: G1/2*Ø12.7mm. H01BR-110177A-BKL1: G1/2*Ø12.7mm. H01BR-160101A-NKL1: G1/2*Ø12.7mm. H01BR-160101A-NKL2: G1/2*Ø12.7mm. H01BR-160143A-NKL1: G1/2*Ø12.7mm. H01BR-160144A-NKL1: G1/2*Ø12.7mm. H01BR-160177A-NKL1: G1/2*Ø12.7mm. H01FF-110191C-NKL1: Ø12.7mm*Ø11.8mm. H01FP-110191C-NKL1: Ø11.8mm&Ø9.9mm. HBSKM-160101A-NKL1: G1/2*Ø12.7mm. HBSKM-160177A-NKL1: G1/2*Ø12.7mm. HENPC-176101S-NKL1: G1/2*M12X1. HENPC-176177S-NKL1: G1/2*M12X1. HENPC-176178S-NKL1: G1/2*M12X1. HENPC-1761E7S-NKL1: G1/2*M12X1. Where G1/2 = ½” BSP (F) conical nut.

Marking:

Jetom, year of manufacture (YYYY) and WRAS on the ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

DN8 bore, Ø13mm outer, length 1600mm, grey nylon braiding: H011R-160101A-NKL1 (chrome plated connector). H01BR-160101A-NKL1 (chrome plated connector). H01BR-160101A-NKL2 (chrome plated and brass connector). H01BR-160143A-NKL1 (VIBRANT FRENCH GOLD and brass connector). H01BR-160144A-NKL1 (ROSE GOLD and brass connector). H01BR-160177A-NKL1 (MATTE BLACK and brass connector). DN8 bore, Ø13mm outer, length 1100mm, grey nylon braiding: H01BR-110101A-BKL1 (chrome plated connector). H01BR-110141A-BKL1 (VIBRANT BRUSHED NICKEL and brass connector). H01BR-110143A-BKL1 (VIBRANT FRENCH GOLD and brass connector). H01BR-110177A-BKL1 (MATTE BLACK and brass connector). H01FF-110191C-NKL1 (brass connector). H01FP-110191C-NKL1 (brass connector). DN8 bore, Ø13mm outer, length 1650mm, black nylon braiding: HBSKM-160101A-NKL1 (chrome plated and brass connector). HBSKM-160177A-NKL1 (MATTE BLACK and brass connector). DN8 bore, Ø12mm outer, length 1780mm, grey nylon bariding: HENPC-176101S-NKL1 (chrome plated and brass connector). HENPC-176177S-NKL1 (MATTE BLACK and brass connector). HENPC-176178S-NKL1 (2 Moderne Brass and brass connector). HENPC-1761E7S-NKL1 (VIBRANT STAINLESS STEEL and brass connector).

Approval Holder:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202085

Size:

See Models

Marking:

MF, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

MFLEXTC150330, 30cm length MFLEXTC150415, 15cm length MFLEXTC150430, 30cm length MFLEXTC150450, 50cm length MFLEXTC150490, 90cm length MFLEXTC150630, 30cm length MFLEXTC150650, 50cm length MFLEXTC150690, 60cm length MFLEXTC220630, 30cm length MFLEXTC220650, 50cm length MFLEXTC220690, 90cm length MFLEXTC151530, 30cm length MFLEXTC151550, 50cm length MFLEXTC151590, 90cm length MFLEXTC222230, 30cm length MFLEXTC222250, 50cm length MFLEXTC150430M, 30cm length MFLEXTC1504V MFLEXTC1506V MFLEXTC2206V MFLEXTC150415V, 15cm length MFLEXTC1510450V, 50cm length MFLEXTC1510650V, 50cm length MFLEXMTC1004 (suit, Set of 2 type) MFLEXMTC100450, 50cm length(suit, Set of 2 type) MFLEXMTC1204 (suit, Set of 2 type) MFLEXMTC120450 (suit, Set of 2 type) MFLEXMTC1015 (suit, Set of 2 type) MFLEXMTC101550, 50cm length(suit, Set of 2 type) MFLEXMTC1215 (suit, Set of 2 type) MFLEXMTC121550, 50cm length(suit, Set of 2 type) MFLEXTC040430, 30cm length MFLEXTC040450, 50cm length DN8 GMF0813S - M10 short male x 3/8"F captive nut GMF0813L - M10 Long male x 3/8"F captive nut GMF0815S - M10 short male x 1/2"F captive nut GMF0815L - M10 Long male x 1/2"F captive nut GMF0803S - M8 short male x 3/8"F captive nut GMF0823S - M12 short male x 3/8"F captive nut GMF0823L - M12 Long male x 3/8"F captive nut GMF0825S - M12 short male x 1/2"F captive nut GMF0825L - M12 Long male x 1/2"F captive nut DN10 GMF1013S - M10 short male x 3/8"F captive nut GMF1013L - M10 Long male x 3/8"F captive nut GMF1015S - M10 short male x 1/2"F captive nut GMF1015L - M10 Long male x 1/2"F captive nut GMF1023S - M12 short male x 3/8"F captive nut GMF1023L - M12 Long male x 3/8"F captive nut GMF1025S - M12 short male x 1/2"F captive nut GMF1025L - M12 Long male x 1/2"F captive nut DN13 GMF1313S - M10 short male x 3/8"F captive nut GMF1313L - M10 Long male x 3/8"F captive nut GMF1315S - M10 short male x 1/2"F captive nut GMF1315L - M10 Long male x 1/2"F captive nut GMF1323S - M12 short male x 3/8"F captive nut GMF1323L - M12 Long male x 3/8"F captive nut GMF1325S - M12 short male x 1/2"F captive nut GMF1325L - M12 Long male x 1/2"F captive nut GAN series DN8 GAN0833 - 3/8"F x 3/8"F captive nut GAN0835 - 3/8"F x 1/2"F captive nut GAN0855 - 1/2"F x 1/2"F captive nut GAN0877 - 3/4"F x 3/4"F captive nut GAN0857 - 1/2"F x 3/4"F captive nut DN10 GAN1033 - 3/8"F x 3/8"F captive nut GAN1055 - 1/2"F x 1/2"F captive nut GAN1077 - 3/4"F x 3/4"F captive nut DN13 GAN1333 - 3/8"F x 3/8"F captive nut GAN1355 - 1/2"F x 1/2"F captive nut GAN1377 - 3/4"F x 3/4"F captive nut GAM series DN8 GAM0833 - 3/8"M x 3/8"F captive nut GAM0835 - 3/8"M x 1/2"F captive nut GAM0853 - 1/2"M x 3/8"F captive nut GAM0855 - 1/2"M x 1/2"F captive nut GAM0877 - 3/4"M x 3/4"F captive nut DN10 GAM1033 - 3/8"M x 3/8"F captive nut GAM1035 - 3/8"M x 1/2"F captive nut GAM1053 - 1/2"M x 3/8"F captive nut GAM1055 - 1/2"M x 1/2"F captive nut GAM1077 - 3/4"M x 3/4"F captive nut DN13 GAM1333 - 3/8"M x 3/8"F captive nut GAM1335 - 3/8"M x 1/2"F captive nut GAM1353 - 1/2"M x 3/8"F captive nut GAM1355 - 1/2"M x 1/2"F captive nut GAM1377 - 3/4"M x 3/4"F captive nut GMM series DN8 GMM0833 - 3/8"M x 3/8"M GMM0855 - 1/2"M x 1/2"M DN10 GMM1033 - 3/8"M x 3/8"M GMM1055 - 1/2"M x 1/2"M GMM1055 - 1/2"M x 1/2"M DN13 GMM1355 - 1/2"M x 1/2"M GMM1377 - 3/4"M x 3/4"M GEF series DN8 GEF0833 - 3/8"Elbow F x 3/8"F GEF0835 - 3/8"Elbow F x 1/2"F GEF0853 - 1/2"Elbow F x 3/8"F GEF0855 - 1/2"Elbow F x 1/2"F DN10 GEF1055 - 1/2"Elbow F x 1/2"F GEF1057 - 1/2"Elbow F x 3/4"F GEF1077 - 3/4"Elbow F x 3/4"F DN13 GEF1355 - 1/2"Elbow F x 1/2"F GEF1357 - 1/2"Elbow F x 3/4"F GEF1377 - 3/4"Elbow F x 3/4"F GEM series DN8 GEM0833 - 3/8"Elbow F x 3/8"M GEM0835 - 3/8"Elbow F x 1/2"M GEM0853 - 1/2"Elbow F x 3/8"M GEM0855 - 1/2"Elbow F x 1/2"M DN10 GEM1055 - 1/2"Elbow F x 1/2"M GEM1057 - 1/2"Elbow F x 3/4"M GEM1077 - 3/4"Elbow F x 3/4"M DN13 GEM1355 - 1/2"Elbow F x 1/2"M GEM1357 - 1/2"Elbow F x 3/4"M GEM1377 - 3/4"Elbow F x 3/4"M GMC series DN8 GMC0815S - M10 short male x 15mm compression GMC0815L - M10 Long male x 15mm compression GMC0825S - M12 short male x 15mm compression GMC0825L - M12 Long male x 15mm compression DN10 GMC1015S - M10 short male x 15mm compression GMC1015L - M10 Long male x 15mm compression GMC1025S - M12 short male x 15mm compression GMC1025L - M12 Long male x 15mm compression DN13 GMC1315S - M10 short male x 15mm compression GMC1315L - M10 Long male x 15mm compression GMC1325S - M12 short male x 15mm compression GMC1325L - M12 Long male x 15mm compression GAC series DN8 GAC0855 - 15mm compression x 1/2"F captive nut GAC0857 - 15mm compression x 3/4"F captive nut GAC0877 - 22mm compression x 3/4"F captive nut DN10 GAC1053 - 15mm compression x 3/8"F captive nut GAC1055 - 15mm compression x 1/2"F captive nut GAC1057 - 15mm compression x 3/4"F captive nut GAC1077 - 22mm compression x 3/4"F captive nut DN13 GAC1355 - 15mm compression x 1/2"F captive nut GAC1357 - 15mm compression x 3/4"F captive nut GAC1377 - 22mm compression x 3/4"F captive nut GAC1977 - DN19 22mm compression x 3/4"F captive nut GVF series DN8 GVF0855 - 15mm isolating valve x 1/2"F captive nut GVF0877 - 22mm isolating valve x 3/4"F captive nut DN10 GVF1055 - 15mm isolating valve x 1/2"F captive nut GVF1057 - 15mm isolating valve x 3/4"F captive nut GVF1077 - 22mm isolating valve x 3/4"F captive nut DN13 GVF1355 - 15mm isolating valve x 1/2"F captive nut GVF1377 - 22mm isolating valve x 3/4"F captive nut GVF1977 - DN19 22mm isolating valve x 3/4"F captive nut GDC series DN8 GDC0855 - 15mm compression x 15mm compression GDC0877 - 22mm compression x 22mm compression DN GDC1055 - 15mm compression x 15mm compression GDC1077 - 22mm compression x 22mm compression DN13 GDC1355 - 15mm compression x 15mm compression GDC1377 - 22mm compression x 22mm compression DN19 GDC1977 - 22mm compression x 22mm compression GDEF series DN13 GDEF1355 - 1/2"Elbow F x 1/2"Elbow F

Approval Holder:

Masterflow Products Limited

Company Name

Masterflow Products Limited

Address

Globall House 95 Vantage Point West Mindlands

Postcode

DY6 7FT

Country

United Kingdom

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240202092

Size:

See Models

Marking:

Brymec, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

DN10 30909 50cm length & 30925 30cm length - 15mm compression x 1/2"F captive nut 30911 50cm length & 30917 30cm length - 15mm compression x 3/4"F captive nut DN13 30904 50cm length & 30913 30cm length - 15mm compression x 1/2"F captive nut 30927 15mm compression x 3/4"F captive nut 30942 50cm length & 30928 30cm length - 22mm compression x 3/4"F captive nut 30903 DN19 22mm compression x 3/4"F captive nut DN10 30924 - 15mm isolating valve x 1/2"F captive nut DN13 30921- 22mm isolating valve x 3/4"F captive nut 30934 50cm length & 30926 30cm length - 15mm compression x 15mm compression DN13 30945 50cm length & 30932 30cm length- 22mm compression x 22mm compression

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company