Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104008

Size:

EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)

Marking:

Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

Horizontal/Self-Priming Multi-Stage Pumps: EH 3/XX A KKK MM EN B C D. EH 5/XX A KKK MM EN B C D. EH 9/XX A KKK MM EN B C D. EH 15/XX A KKK MM EN B C D. EH 20/XX A KKK MM EN B C D. EHsp 3/XX A KKK MM EN B C D. EHsp 5/XX A KKK MM EN B C D. Where: EH = Standard model. EHsp = Self-priming model. 3/5/9/15/20 = rated power [m³/h]. XX = no. of stages (50 Hz single phase): 2 to 9 for EH 3 & 5; 2 to 6 for EH 9; 2 to 3 for EH 15; 2 for EH 20; 4 & 5 stages for EHsp 3 & 5. (50 Hz three phase): 2 to 9 for EH 3 & 5; 2 to 8 for EH 9; 2 to 7 for EH 15; 2 to 5 for EH 20; 4 & 5 stages for EHsp 3 & 5. (60 Hz single phase): 2 to 7 for EH 3; 2 to 5 for EH 5; 2 to 3 for EH 9; 3 to 5 for EHsp 3 & 5. (60 Hz three phase): 2 to 7 for EH 3 & 5; 2 to 5 for EH 9; 2 to 4 for EH 15; 2 to 3 for EH 20; 3 to 5 for EHsp 3 & 5. A = Pump material: “I” for AISI 304 (All the versions) and “N” for AISI 316 (not available for “EHsp” versions). KKK = Motor power (kW x 10). MM = motor connection and frequency as follows: M5 = single phase and 50Hz T5 = three phase and 50Hz M6 = single phase and 60Hz T6 = three phase and 60Hz EN = Type of mechanical seal: E0 or E1 or E2 for EH 3/5/9 models. E1 or E2 for EH 15/20 models. E0 for EHsp models. B = “No load” - standard version, D - sealing disc with plug. C = “No load” - standard version, A - cable with plug, S = without condensate drain plugs. D = motor efficiency class.

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of single stage end suction pumps with stainless steel or cast iron pump housings, EPDM ‘O’-rings and wear rings available in low-lead bronze/brass or stainless steel. Cast iron models are coated in black cathodic paint (textured finish) or black epoxy (smooth finish). The pumps are available with carbon graphite/silicon carbide mechanical shaft seal. Impellors are available in cast iron with black cathodic paint, low-lead bronze or stainless steel. The pumps are available with fixed flange, as well as loose flange (model dependent). Maximum working pressure 10.0 or 16.0 bar depending on model. Maximum operating temperatures: Stainless steel and cast iron with (smooth) epoxy coating pumps 85°C. Cast iron pumps with (textured) cathodic paint coating are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104914

Size:

Nominal ø of suction port sizes (DN): 50, 65, 80, 100, 125, 150, 200, 250, 300, 350. Nominal ø of discharge port (DN): 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,300

Marking:

Grundfos on body. Model, Pressure Max, Temperature Max, Made in Hungary and Grundfos logo on data plate.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

NB, NBE, NBG, NBGE, NK, NKE, NKG, NKGE. NB, NBE, NBG, NBGE Example codes: NBE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NBG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. NK, NKE, NKG, NKGE Example codes: NKE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NKG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. Where: NBE, NBG, NKE or NKG is the type range. It can also be NB, NBGE, NK or NKGE. NB, NBG, NK, NKG: Pump with standard motor. NBE, NBGE, NKE, NKGE: Pump with MGE motor. _ Nominal diameter (mm) of inlet port (DN) - not displayed on NB/NBE/NK/NKE models. For NBG/NBGE/NKG/NKGE models the value will be between 50 & 350. 32 = Nominal diameter (mm) of outlet port (DN). Value between 32 & 300. 125 = Nominal impeller diameter [mm] (dimension varies). .1 = Reduced performance. 142 = Actual impeller diameter [mm] (dimension varies). Sensor version S1 Without factory-fitted sensor, pressure sensor is supplied with the pump. S2 With factory-fitted differential-pressure sensor, Series 2000. X1: Letter or multiple letters for pump version. Pipe connection F: DIN flange. Flange pressure rating (PN - nominal pressure) 1 = 10 bar. 2 = 16 bar. X2: Materials - Pump housing/Impeller/Wear ring/Shaft denoted by a single letter. Rubber parts in pump The letter indicates material of O-ring for pump cover E: EPDM. Shaft seal arrangement S: Single seal. Code for mechanical shaft seal and shaft seal rubber parts BBQE or BQQE.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of booster pumps with stainless steel bodies and impellers (AISI 304: AL-RED models or AISI 316: CP models), EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure: CP(m) 100-130-132-150-158 and AL-RED(m) 600-610-620 models: 6.0 bar. All other models: 8.0 bar. Maximum operating temperature 90°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2107073

Size:

1 ¼” BSP (F).

Marking:

Pedrollo, made in Italy, production date and information (YY/production line: number or letter/DDD), maximum temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/07/2026

Model:

Single phase (CPm or AL-REDm) or three phase (CP or AL-RED): CP(m) 100-ST4. CP(m) 130-ST4. CP(m) 132-ST4. CP(m) 150-ST4. CP(m) 158-ST4. CP(m) 170-ST4. CP(m) 170M-ST4. CP(m) 180-ST4. CP(m) 190-ST4. CP(m) 200-ST4. CP(m) 100-ST6. CP(m) 130-ST6. CP(m) 132-ST6. CP(m) 150-ST6. CP(m) 158-ST6. CP(m) 170-ST6. CP(m) 170M-ST6. CP(m) 180-ST6. CP(m) 190-ST6. CP(m) 200-ST6. AL-RED(m) 600 -4. AL-RED(m) 610 -4. AL-RED(m) 620 -4. AL-RED(m) 650 -4. AL-RED(m) 660 -4. AL-RED(m) 670 -4. AL-RED(m) 650M -4. AL-RED(m) 660M -4. AL-RED(m) 670M -4. AL-RED(m) 650L -4. AL-RED(m) 660L -4. AL-RED(m) 670L -4. AL-RED(m) 600 -6. AL-RED(m) 610 -6. AL-RED(m) 620 -6. AL-RED(m) 650 -6. AL-RED(m) 660 -6. AL-RED(m) 670 -6. AL-RED(m) 650M -6. AL-RED(m) 660M -6. AL-RED(m) 670M -6. AL-RED(m) 650L -6. AL-RED(m) 660L -6. AL-RED(m) 670L -6.

Approval Holder:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Range of shower arms and brackets with brass bodies (various finishes). Shower brackets incorporate single check valves cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2104326

Note:

Open outlet use only.

Size:

½” BSP(M)

Marking:

NK Porcelanosa on backing plate.

Installation Requirements:

R001 R040

Expiry date:

30/04/2026

Model:

Wall brackets: 100213266 N629321403 100039121 N198490001 100064216 N199999973 100038631 N158490001 Shower arms: 100063878 N192579908 100146670 N192579950 100090331 N192579919 100090332 N192579918 100213248 N807993290 100039088 N192452301

Approval Holder:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

CV-20 Km2 VILA-REAL CASTELLON

Postcode

12540

Country

Spain

General Email

certificaciones@noken.com

View All Listings by this Company

Range of shower outlets with brass bodies (various finishes) incorporating NBR ‘O’-rings (280R/W model) or EPDM ‘O’-rings (286P/W model). The inlet of the 286P/W model incorporates a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106701

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

THG on connector.

Installation Requirements:

R001 R040

Expiry date:

30/06/2026

Model:

280R/W showerhead 1/2 ø300 286P/W showerhead 1/2 ø200 Styles: G00 – all styles Finishes: A02 - polished chrome, C02 - matt chrome, C03 - satin chrome, G02 - polished chrome/polished gold, F18 - rhodium silver, F19 - matt rhodium silver, H03 - varnished antique silver, H08 - varnished matt antique silver, B01 - polished nickel, C01 - matt nickel, G01 - polished nickel/polished gold, E02 - matt nickel/polished gold, D01 - varnished clear bronze, D05 - varnished matt bronze, H24 - varnished antique red copper, H07 - matt antique red copper, H44 - polished luxbrass, H16 - matt luxbrass, H12 - satin luxbrass, F01 - polished gold, F02 - matt gold, F27 - rose gold, F23 - PVD aspect chrome, H50 - PVD aspect laiton mat, F33 - PVD brown bronze colour, F34 - PVD brown bronze colour - mat, F35 - PVD brown bronze colour - satiné, H52 - PVD couleur doré, H53 - PVD couleur doré mat, H54 - PVD couleur doré satiné, H49 - PVD couleur laiton, H51 - PVD couleur laiton satiné, H55 - PVD couleur nickel, H56 - PVD couleur nickel mat, H57 - PVD couleur nickel satiné, F20 - PVD dore. A complete model number comprises of a three digit code from each section above, for example G00.280R/W.A02. This would give you a showerhead Ø 300 ½”- all style and polished chrome finish.

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company