Directory Search Results

Print List

#2303529

'FKM 90 Black 6019020105-CMP00700'. Black coloured, compression moulded FKM material. Shore hardness 90. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5370 Rubbers
Section Subtitle:
Fluoroelastomers - components.
WRAS Approval Number:
2303529
Expiry date:
31/03/2028

Approval Holder:
NDS-Seals BV (a Sealution company)
Company Name
NDS-Seals BV (a Sealution company)
Address
Edvard Munchweg 61, 1328MK Almere
Country
Netherlands

View All Listings by this Company

Print This Approval


#2303532

'ROGM 2022 'O' ring'. Black coloured, injection moulded NBR 'O' ring. Shore hardness 70. Tested in-radius size 4.4mm. For use with water up to 23°C.

Section:
5390 Rubbers
Section Subtitle:
Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:
2303532
Expiry date:
31/03/2028

Approval Holder:
H2O Flow SDN BHD
Company Name
H2O Flow SDN BHD
Address
No 10, Jalan Mas 1, Taman Mas Falim, 30200 Ipoh, Perak
Country
Malaysia

View All Listings by this Company

Print This Approval


#2303519

‘Loctite® 55’. White coloured nylon cord coated with a silicone paste, intended for use as a thread sealant. The cord is to be applied and tightened in accordance with Technical Data Sheet ‘reference 1.9’, dated August 2016 and this material is only approved for these conditions. For use with water up to 85°C.

Section:
5510 Sealants - Screwed Joints
Section Subtitle:
General.
WRAS Approval Number:
2303519
Expiry date:
31/03/2028

Approval Holder:
Henkel Ltd.
Company Name
Henkel Ltd.
Address
Technologies House, Wood Lane End, Hemel Hempstead
Postcode
HP2 4RQ
Country
Herts
Phone
+44 1442 278 100
General Email
loctite.connect@henkel.com

View All Listings by this Company

Print This Approval


#2212093

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose and a manual lever for controlling the temperature. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212093
Size:
½” BSP male
Marking:
+TSL on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2027
Model:
L981, L982, L983 & L984

Approval Holder:
The Splash Lab UK
Company Name
The Splash Lab UK
Address
Unit 34 Meadow Industrial Estate Stockport
Postcode
SK1 2BU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2304069

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated – brass bodies). Flow is controlled via a solenoid which is actuated via an infrared sensor and the temperature is controlled by a manual lever. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2304069
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Axor on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2028
Model:
10 145 000 Axor Stark electronic basin mixer with temp pre adjustment with 230 V mains connection. 10 101 000 Axor Stark electronic basin mixer with temp control battery operated. 10 106 000 Axor Stark Electronic basin mixer with temp pre-adjustment battery-operated. 10 140 000 Axor Stark Electronic basin mixer with temp control with 230 V Mains connection. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1099 of 2237

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.