Range of vertical multistage pumps with either stainless-steel bodies or cast-iron bodies with a black epoxy powder coating, stainless-steel impellers, shaft and outer sleeve, EPDM ‘O’-rings and a silicon carbide + EPDM shaft seal. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311069

Size:

DN25 -100.

Marking:

Capari logo on metal cover plate on side of body. Flow arrow on body. Type, model, pressure and other information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

CVX AAB/CC-D/E Series: CVX. AA: Pump model size representing flow rate (m³/h) - 03, 05, 10, 15, 20, 32, 45, 64, 90. B: Pump generational code - 1. CC: No. of stages (model dependent - see below). D: Frequency - V = 50Hz or W = 50/60Hz. /G = cast iron base (CVX451/641/901 models only). Stainless steel bodies: CVX031: 5 -36 stages. 691472 - CVX031/5-V (DN25), 691473 - CVX031/7-V (DN25), 691474 - CVX031/10-V (DN25), 691475 - CVX031/15-V (DN25), 691476 - CVX031/19-V (DN25), 691477 - CVX031/23-V (DN25), 691478 - CVX031/29-V (DN25), 691479 - CVX031/33-V (DN25), 691480 - CVX031/36-V (DN25). CVX051: 4-36 stages. 691482 - CVX051/4-V (DN25), 691483 - CVX051/5-V (DN25), 691484 - CVX051/8-V (DN25), 691485 - CVX051/10-V (DN25), 691486 - CVX051/13-V (DN25), 691487 - CVX051/16-V (DN25), 691488 - CVX051/20-V (DN25), 691489 - CVX051/24-V (DN25), 691490 - CVX051/29-V (DN25), 691491 - CVX051/36-V (DN25). CVX101: 3-22 stages. 691493 - CVX101/3-V (DN40), 691494 - CVX101/4-V (DN40), 691495 - CVX101/6-V (DN40), 691496 - CVX101/9-V (DN40), 691497 - CVX101/12-V (DN40), 691498 - CVX101/16-V (DN40), 691499 - CVX101/22-V (DN40). CVX151: 2-17 stages. 691501 - CVX151/2-V (DN50), 691502 - CVX151/3-V (DN50), 691503 - CVX151/5-V (DN50), 691504 - CVX151/7-V (DN50), 691505 - CVX151/9-V (DN50), 691506 - CVX151/12-W (DN50), 691507 - CVX151/14-V (DN50), 691508 - CVX151/17-V (DN50). CVX201: 2-17 stages. 691510 - CVX201/2-V (DN50), 691511 - CVX201/3-V (DN50), 691512 - CVX201/5-V (DN50), 691513 - CVX201/7-V (DN50), 691514 - CVX201/10-W (DN50), 691515 - CVX201/14-V (DN50), 691516 - CVX201/17-V (DN50). CVX321: 2-14 stages. 691518 - CVX321/2-V (DN65), 691519 - CVX321/3-V (DN65), 691520 - CVX321/4-V (DN65), 691521 - CVX321/6-W (DN65), 691522 - CVX321/8-V (DN65), 691523 - CVX321/10-V (DN65), 691524 - CVX321/12-V (DN65), 691525 - CVX321/14-V (DN65). Cast iron bodies: CVX451: 2-13 stages. 691533 - CVX451/2-V/G (DN80), 691534 - CVX451/3-V/G (DN80), 691535 - CVX451/4-V/G (DN80), 691536 - CVX451/5-2-V/G (DN80), 691537 - CVX451/6-2-V/G (DN80), 691872 - CVX451/6-V/G (DN80), 691538 - CVX451/9-2-V/G (DN80), 691873 - CVX451/10-V/G (DN80), 691874 - CVX451/13-2-V/G (DN80). CVX641: 2-8 stages. 691539 - CVX641/2-V/G (DN100), 691540 - CVX641/3-1-V/G (DN100), 691541 - CVX641/4-V/G (DN100), 691875 - CVX641/4-2-V/G (DN100), 691542 - CVX641/6-2-V/G (DN100), 691543 - CVX641/7-1-V/G (DN100), 691876 - CVX641/8-1-V/G (DN100). CVX901: 2-6 stages. 691544 - CVX901/2-V/G (DN100), 691545 - CVX901/3-V/G (DN100), 691877 - CVX901/3-2-V/G (DN100), 691546 - CVX901/4-V/G (DN100), 691547 - CVX901/5-V/G (DN100), 691878 - CVX901/6-V/G (DN100).

Product Images

Approval Holder:

Caprari S.p.A

Company Name

Caprari S.p.A

Address

Via Emilia, Ovest 900, 41123 Modena

Country

Italy

View All Listings by this Company

‘Waterforms’ shower pipe riser rail with chromium plated brass body. Open outlet use only. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2311078

Size:

1/2" BSP (F)

Marking:

Hansgrohe on handset holder.

Installation Requirements:

R001 R040

Expiry date:

30/11/2028

Model:

19709452.19709561.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of plastic shower handsets available in various finishes. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2312323

Note:

Open Outlet use only.

Size:

½” BSP (M).

Marking:

Laser marking, Almar, MADE IN ITALLY.

Installation Requirements:

R001 R040

Expiry date:

31/12/2028

Model:

E082019.XXXYYZZ, E082050.XXXYYZZ, E082070.XXXYYZZ, E082094.XXXYYZZ. Where: XXX denotes finish and can be replaced by: 002 - Chrome. 136 - White painted. 141 - Black plainted. 245 - PVD Gold. 246 - PVD Stainless steel. 277 - Nickel nrushed. 284 - PVD Copper brushed. 285 - PVD High brass brushed. 286 - PVD Gun metal brushed. YY is replaced by an alphanumeric code to denote customer. ZZ is replaced by an alphanumeric code to denote packaging information.

Approval Holder:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Manufacturer:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110140

Size:

See model

Marking:

Tenby, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

AX-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. AX-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. AX-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. AX-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. AX-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. AX-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. AX-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). AX-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). AX-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). AX-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). AX-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. AX-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. AX-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. AX-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. AX-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. AX-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). AX-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). AX-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). AX-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. AX-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. AX-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. AX-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. AX-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. AX-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit AX-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. AX-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. AX-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). AX-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). AX-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:

Tenby Imports & Exports Ltd.

Company Name

Tenby Imports & Exports Ltd.

Address

Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire

Postcode

WD25 8HL

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections (see models). Some models incorporate a screwdriver operated isolation valve. All compression and push-fit connections are for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 7.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2312018

Size:

See Model list. Note, for the connection sizes listed in the models below, use the following key: XXMM = XXmm compression, MXXx1 = MXXx1 (M) FXX” = XX” BSP (F) XXmm Pushfit = XXmm Pushfit

Marking:

Dingbo logo, WRAS and Date of manufacture (YYYY) on ferrule

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Model Code/Number (Connection Size) DB8MM-15MM×M10L (15MM × M10x1) DB8MM-15MM×M10S (15MM × M10×1) DB8MM-1/2×M10L (F1/2" × M10×1) DB8MM-1/2×M10S (F1/2" × M10×1) DB9MM-1/2×1/2 (F1/2" × F1/2") DB9MM-1/2×M12L (F1/2" × M12×1) DB9MM-1/2×M12S (F1/2" × M12×1) DB9MM-15MM×M12L (15MM × M12×1) DB9MM-15MM×M12S (15MM × M12×1) DB9MM-1/2×15MM (F1/2" × 15MM) DB9MM-15MM×15MM (15MM × 15MM) DB9MM-3/4×15MM (F3/4" × 15MM) DB9MM-1/2×15MMV (F1/2" × 15MM with VALVE) DB9MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-1/2×1/2 (F1/2" × F1/2") DB12MM-1/2×15MM (F1/2" × 15MM) DB12MM-15MM×15MM (15MM × 15MM) DB12MM-3/4×15MM (F3/4" × 15MM) DB12MM-3/4×22MM (F3/4" × 22MM) DB12MM-3/4×15MMV (F3/4" × 15MM with VALVE) DB12MM-3/4×22MMV (F3/4" × 22MM with VALVE) DB19MM-3/4×22MM (F3/4" × 22MM) DB19MM-3/4C×22MM (F3/4" × 22MM) DB12MM-1/2 x 15mm Push- fit (F1/2" × 15mm Pushfit) DB12MM-3/4 x 15mm Push- fit (F3/4" × 15mm Pushfit) DB12MM-1/2 x 15mm Push- fit VALVE (F1/2" × 15mm Pushfit with VALVE) DB12MM-3/4 x 15mm Push- fit VALVE (F3/4" × 15mm Pushfit with VALVE) DB12MM-1/2 x 22mm Push- fit (F1/2" × 22mm Pushfit) DB12MM-3/4 x 22mm Push- fit (F3/4" × 22mm Pushfit) DB12MM-1/2 x 22mm Push- fit VALVE (F1/2" × 22mm Pushfit with VALVE) DB12MM-3/4 x 22mm Push- fit VALVE (F3/4" × 22mm Pushfit with VALVE) DB12MM-15mm Push-fit x 15mm Push-fit (15mm Pushfit × 15mm Pushfit) DB12MM-22mm Push-fit x 22mm Push-fit (22mm Pushfit × 22mm Pushfit) Note, any models with either ‘VALVE’ or ‘V’ on the end of the model name incorporate a screwdriver operated isolation valve.

Approval Holder:

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Address

No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company

Manufacturer:

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Company Name

Zhejiang Dingbo Plumbing Manufacturing Co Ltd

Address

No.388 SHUPU NORTH ROAD, LUCHENG LIGHT INDUSTRIAL ZONE, WENZHOU CITY, ZHEJIANG PROVINCE, CHINA 325019

View All Listings by this Company