Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305343

Size:

see model

Marking:

EN1254-2 & size on nut. HonSon logo (ISI) on fitting body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Product Images

Approval Holder:

Wenling Honson Brassware Co., Ltd

Company Name

Wenling Honson Brassware Co., Ltd

Address

Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515

Country

China

View All Listings by this Company

Manufacturer:

Wenling Honson Brassware Co., Ltd

Company Name

Wenling Honson Brassware Co., Ltd

Address

Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515

Country

China

View All Listings by this Company

Range of “Effast” ABS fittings for use with ABS pipe complying with BS EN 5391-2006. Maximum working pressure: 15 Bar. Maximum operating temperature: 23°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2306055

Size:

20, 25, 32, 40, 50, 63, 75, 90 OR 110mm solvent weld (SW) connection (Model codes with XXXX is replaced with 0200 for 20mm, or 1100 for 110mm SW etc.) ½”, ¾”, 1”, 1.1/4”, 1.1/2”, 2”, 3” or 4” BSP (M) or (F) connections. (Model codes with a Y on the end is replaced with B for ½”, C for ¾”, D for 1”, E for 1.1/4”, F for 1.1/2”, G for 2”, H for 3” and I for 4” BSP).

Marking:

Effast and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

RAAGOAXXXX - Elbow 90° BS (20-110 SW), RAAGYAXXXX - Elbow 45° BS (20-110 SW), RAAMAAXXXX - Socket BS (20-110 SW), RAATIAXXXX - tee 90° BS (20-110 SW), RAACAAXXXX - Cap BS (25-110 SW), RAACUAXXXX - Bend 90° (25-110 SW,) RAABOAXXXX - Union BS (20-110 SW), RAAQRAXXXX - Serrated Face Stub Flange (32-110 SW), RAAFNAXXXX - Fixed Flange ISO (20-110 SW), RAAFFAXXXX - Fixed Flange BS (50-110 SW), RAAFCAXXXX - Blanking Flange ISO (63-110 SW), RAARCAXXXB - Reducing Bush BS (25-32 SW), RAARCAXXXC - Reducing Bush BS (32 SW), RAARCAXXXD - Reducing Bush BS (40-63 SW), RAARCAXXXE - Reducing Bush BS (50-63 SW), RAARCAXXXF - Reducing Bush BS (63-90 SW), RAARCAXXXG - Reducing Bush BS (75-110 SW), RAARCAXXXH - Reducing Bush BS (90 SW), RAARCAXXXI - Reducing Bush BS (110 SW), RAARCAXXXL - Reducing Bush BS (140-160 SW), RCAGOCXXXY - Elbow 90° BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCATICXXXY - Tee 90° BS/BSPP (20-110 SW (x2) x ½” to 4” BSP (F)), RCAMACXXXY - Socket BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCAAFCXXXY - Female Adaptor BS/BSPP (20-63 SW x ½” to 2” BSP (F)), RCAAMCXXXY - Male Adaptor BS/PSBB (20-110 SW x ½” to 4” BSP (M)), RCARCCXXXY - Reducing Bush BS/BSPP (20-32 SW x ½” to 1” BSP (F)),

Product Images

Approval Holder:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Loc. Pianmercato 5C-D-H Cicagna

Country

Italy

General Email

Christopher.sanguineti@effast.com

View All Listings by this Company

Manufacturer:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Loc. Pianmercato 5C-D-H Cicagna

Country

Italy

General Email

Christopher.sanguineti@effast.com

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208820

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

General Email

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of stainless-steel plate heat exchanger assemblies incorporating single or twin pumps on the primary circuit. Maximum working pressure 10 Bar (UKE-8 models) or 6 bar (UKE-14 models).

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1350 Heat Exchangers

Size:

UKE-8 range: Secondary circuit: 1¼” BSP (M) inlet/outlet, Primary circuit: 1¼” BSP (F) inlet/outlet. UKE-14 range: Secondary circuit: 2” BSP (M) inlet/outlet, Primary circuit: DN40 or DN50 flange inlet/outlet.

Marking:

UK Exchangers, Model no, Serial number, pressure, max temperature, manufacture date (YYYY) on data plate on body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

UKE-8-YY-XX (8 – 75 plates), UKE-14-YY-XX (8-70 plates). YY denotes number of ports, XX denotes number of plates.

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company