Range of wall mounted concealed thermostatic mixing valves with brass bodies. Flow is controlled by either a 2-way combined shut off/diverter cartridge or a ceramic disc headwork with various operating member (see models). The temperature is controlled independently via a thermostatic cartridge with a various operating member that also incorporates a manual override button. The inlets incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic shower valves (chromium plated brass). The 86005130 model incorporates a 2-way ceramic disc diverter headwork with a cube operating member controlling the flow. All other models incorporate a ¼ turn ceramic disc headwork controlling the flow with either a dome or single lever operating member. The outlet of these models incorporates a manual diverter with a single lever operating member. Temperature for all models is controlled independently via a thermostatic cartridge with either a cube, dome or single lever operating member incorporating a manual override button. Each inlet incorporates a combined NBR washer and stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated or nickel plated ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of combined temperature and pressure relief valves incorporating DZR brass bodies, and a silicone diaphragm. The valves are pre-set at 4.5, 6.0, 7.0 or 10 bar (see models). Model PTEM540110 in corporates Loctite. The valves incorporate a manually operated rotational easing gear and are for use with copper pipe (EN1057) Please refer to model for maximum working pressure. Maximum operating temperature 95°C
Three-way diverter valve with a stainless-steel body and stainless-steel ball. Maximum working pressure 9.8 bar Maximum operating temperature 80°C.
‘Mark II’ range of equilibrium float operated valves with gunmetal bodies, incorporating EPDM rubber washers and NBR rubber ‘O’-rings and washers. QA102: 1” & 2” models also incorporate a fibre washer. Maximum operating pressure 10.0 bar. For cold water use only.
‘Mark I’ range of equilibrium float operated valves with gunmetal bodies, incorporating EPDM rubber washers and NBR rubber ‘O’-rings and washers. QA102: ½” - 1½” models also incorporate a fibre washer. Maximum operating pressure 5.0 bar. For cold water use only.
Range of pressure reducing valves with DZR brass bodies, internal stainless steel filter, EPDM ‘O’-rings and diaphragm. Adjustable outlet pressures between 1.0 and 6.0 bar Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 80°C.
Range of pressure reducing valves with DZR brass bodies adjustable between 1.0 and 6.0 bar. The valves incorporate a stainless steel strainer. Maximum supply pressure 25.0 bar or 16.0 bar (see model). Maximum operating temperature 80°C.
Range of pressure reducing valves with DZR brass bodies, internal stainless steel filter, EPDM ‘O’-rings and diaphragm. Adjustable outlet pressures between 1.0 and 6.0 bar Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 80°C.
Page 104 of 652
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
