Range of flow sensors with plastic bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

0009 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.

WRAS Approval Number:

250102714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN6 (½” BSP M), DN8 (½” BSP M), DN10 (¾” BSP M), DN15 (¾” BSP M), DN20, (1” BSP M) & DN25 (1¼” BSP M).

Marking:

Huba control, model code, connection size, date of manufacture (DD/MM/YY) and other technical data on face of body. Flow arrow and DN on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

Vortex Flow Sensor Type 240.

Product Images

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

DC type pipe interrupter with a permanent atmospheric vent (DZR brass body) incorporating a flow regulator at the inlet and brass shroud. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0014 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2. Type DC - Pipe interrupter with permanent atmosphere vent. The device must be fitted with the lowest point of the air aperture not less than 150mm above the free discharge point, or spillover level of an appliance, and have no valve, flow restrictor or tap on its outlet.

WRAS Approval Number:

250104711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Cistermiser on shroud, DC pipe interrupter and CR mark stamped on body.

Installation Requirements:

R001 R165

Expiry date:

31/01/2030

Model:

DWC/10

Product Images

Approval Holder:

Cistermiser Ltd

Company Name

Cistermiser Ltd

Address

Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley

Postcode

RG5 3AN

Country

United Kingdom

General Email

jake.felstead@cistermiser.co.uk

View All Listings by this Company

Range of spring loaded, resilient trim check valve cartridges with plastic body. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

241204709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20 & DN25.

Marking:

W (Watts logo – Socla is a unit of the Watts Group), DN & flow arrow on body. Models WM020 & WM025 also have Ocean on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

Type TK range: Model WM015 (Ref W149015600 or 149B043318): DN15. Model WM020 (Ref W140020600 or 149F043509): DN20. Model WM025 (Ref W140025600 or 149F043510): DN25.

Product Images

Approval Holder:

Socla SAS

Company Name

Socla SAS

Address

365, Rue du Lt Putier, 71530 Virey Le Grand, France

Phone

+33 3 85 97 42 42

View All Listings by this Company

Spring loaded, resilient trim, in-line check valve cartridge with NBR & EPDM ‘O’-rings, plastic guide, stem and body. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 8.6 Bar. Maximum operating temperature 60°C.

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

250102709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12.8mm OD

Marking:

SOLEX on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

T10193

Product Images

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

View All Listings by this Company

Range of non-verifiable double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. The products incorporate a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250104709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½”, ¾” & 1” BSP (F)

Marking:

VIR logo, CR, PN16 DN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

782DR Double Check Valve

Product Images

Approval Holder:

VIR Valvoindustria Ing. Rizzio S.p.A.

Company Name

VIR Valvoindustria Ing. Rizzio S.p.A.

Address

Via Circonvallazione n. 10, 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Range of stainless steel calorifiers. Max working pressure 10 bar. Max operating temperature 90°C.

Section:

0090 Calorifiers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” BSP (F) x 2” BSP (F)

Marking:

Versol (manufacturer) website address, manufacturer address serial no. Year of manufacture (YYYY) Material, capacity, pressure max, temp max and other tech info on data plate

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

VERSOTHERM STI-500 Storage Calorifiers-500L VERSOTHERM STI-750 Storage Calorifiers-750L VERSOTHERM STI-1000 Storage Calorifiers-1000L VERSOTHERM STI-1500 Storage Calorifiers-1500L VERSOTHERM STI-2000 Storage Calorifiers-2000L

Product Images

Manufacturer:

Versol Ltd Sp Zoo,

Company Name

Versol Ltd Sp Zoo,

Address

Robotnicza 38, 39-100 Ropczyce

View All Listings by this Company

GRPBP range of one piece, pre-insulated cold water storage cisterns and covers for domestic water storage, supplied with a wholesome water kit. The cisterns walls are available in grey, blue, green, white, red and anthracite grey (external) colours and the cistern base is straw coloured. For cold water use only. From November 2024 the water contact layer of the cistern base and walls is available in grey or straw colours. The outer layer of the cistern base is available in blue, green, white, red and anthracite grey colours.

Section:

0120 Cisterns Storing Water for Domestic Purposes

Section Subtitle:

Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

241004048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20 litres – 42,000 litres.

Marking:

GRPBP & capacity on adhesive label on body.

Installation Requirements:

R001 R270 R280

Expiry date:

31/10/2029

Model:

GRPBP tank 20-50000 GRPBP Excell 40001 - 42000

Approval Holder:

GRP BUILDING PRODUCT

Company Name

GRP BUILDING PRODUCT

Address

UNIT 2A HAM LANE KINGSWINFORD

Postcode

DY6 7JU

View All Listings by this Company

Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assembly (chromium plated brass body) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

250102016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The product is supplied with a lever type pop-up waste – not verified by test.

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections

Marking:

Dornbracht on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2030

Model:

33600671

Product Images

Manufacturer:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

View All Listings by this Company

Ceramic cartridge headwork with a plastic body, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250112002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Ø 45mm

Marking:

Bristan on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

08GC45FBE00.04

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Ceramic cartridge headwork with a plastic body and EPDM seals, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

241204022

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26.92mm OD.

Marking:

HG on the body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

30 614 320.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company