Directory Search Results

Fittings Materials
Print List

#2205067

Range of wall mounted non concussive taps (chrome plated brass) incorporating a spring-loaded headwork operated via a single lever operating member. The outlet incorporates a flow straightener. Maximum working pressure: 10.0 bar. Maximum operating temperature: 65°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
2205067
Size:
½” BSP (M)
Marking:
Intatec logo on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
NC190CP NC190CP5
Product Images
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval

#2205029

Range of automatic air venting valves with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2205029
Marking:
RWC and DR mark on body.
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
ADMT503004: 15mm compression. ADMT503005: 22mm compression. ADMT503010: ¾” BSP (M).
Product Images
Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval

#2205033

Wall mounted, manually operated, blending valve (chromium plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2205033
Size:
¾” BSP (M) X ½” BSP (M) offset union
Marking:
Dornbracht on tap body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2027
Model:
33300660
Product Images
Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval

#2205035

Range of wall mounted, concealed, manual blending bath shower mixers (brass bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter (to divert the flow between a shower outlet or bath spout outlet - not supplied). The products comprise of a basic set, (concealed body), which includes the ceramic cartridge and a finish set that includes the self-cancelling diverter, headwork collar, operating member and trim set. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2205035
Note:
This approval does not include a shower hose and handset, or a bath spout. The 31 741 180 Hansgrohe Basic set is not approved in its own right.
Size:
Inlet: ½” BSP (F) to basic set. Shower Outlet: ½” BSP (F). Bath Outlet: ¾” BSP (F).
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R030
Expiry date:
31/05/2027
Model:
31 741 180 Hansgrohe Basic set for single lever bath mixer for concealed installation which must be installed in conjunction with the following finish sets: 31 484 xxx Hansgrohe Metris Single lever bath mixer, 31 947 xxx Hansgrohe Focus Single lever bath mixer, 71 406 xxx Hansgrohe Logis Single lever bath mixer, 71 746 xxx Hansgrohe Talis E Single lever bath mixer, 72 407 xxx Hansgrohe Talis S Single lever bath mixer. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#2205049

Wall mounted, manual blending valve (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2205049
Note:
This approval does not include a shower hose and handset.
Size:
½" x ¾" offset unions.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2027
Model:
31 680 xxx Hansgrohe Metris Single lever shower mixer for exposed installation. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 11 of 18

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.