Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103319

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer) or 'Jianglin', WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

JL – A*B – XX – D – E – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

‘PANASIA 051 series’ of stainless steel braided EPDM lined flexible hose assemblies with brass or chrome plated brass end connections. Maximum working pressure and operating temperatures: 16.0 bar and cold water use only. 10.0 bar @ 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103334

Size:

DN6 bore: M10*1, F3/8, M8*1. DN8 bore: M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN9 bore (1,75mm thickness): M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN9 (1,90mm thickness): M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN10 bore: M10*1, F1/2, M1/2, F15*1, M12*1, F3/4, 9/16‐24UNEF2B, F1/2‐14. DN11 bore: F1/2. DN13 bore: M10*1, F1/2, F3/4. DN14 bore: F1/2, F3/4.

Marking:

Panasia, WRAS, year of manufacture (YYYY) on crimped connection.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

PANASIA 051 Series

Approval Holder:

Hangzhou Panasia Sanitary Ware Co. Ltd.

Company Name

Hangzhou Panasia Sanitary Ware Co. Ltd.

Address

No. 137 Baiyunyuan East Road, Tonglu, Hangzhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Hangzhou Panasia Sanitary Ware Co. Ltd.

Company Name

Hangzhou Panasia Sanitary Ware Co. Ltd.

Address

No. 137 Baiyunyuan East Road, Tonglu, Hangzhou, Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies, incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2104043

Size:

FS-BH-F1/2*M10: ½” captive nut x M10. FS-BH-F3/8*M10: ⅜” captive nut x M10. FS-BH-F9/16*M10: 9/16” captive nut x ½” captive nut. FS-BH-F1/2*1/2: ½” captive nut x ½” captive nut.

Marking:

Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2026

Model:

FS-BH-F1/2*M10 (φ 11, φ 12. Length: 250mm-1500mm). FS-BH-F3/8*M10 (φ11. Length: 250mm-1500mm). FS-BH-F9/16*M10 (φ11. Length: 250mm-1500mm). FS-BH-F1/2*1/2 (φ 11, φ 12, φ 14. Length: 250mm-1500mm).

Approval Holder:

Kaiping Fushun Sanitary Ware Co., Ltd

Company Name

Kaiping Fushun Sanitary Ware Co., Ltd

Address

The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City

Country

China

Phone

0750-2707296

General Email

382775085@qq.com

View All Listings by this Company

Range of PEX lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2104308

Size:

See model.

Marking:

Kloe, WRAS, date of manufacture (M/Y Month = A to L, Year L to W).

Installation Requirements:

R001 R008

Expiry date:

30/04/2026

Model:

KLOE-PEX01 series/ Ø12(DN8) available with connections: 3/8''FIP 3/8''FIP(Elbow) ½"FIP(Ø12,Ø14) ½"MIP ½"FIP(Elbow)(Ø12) ¾"FIP M8*1(Short) M8*1(Long) M10*1(Short) M10*1(Long) M12*1(Short) M12*1(Long) 15MM Ø14(DN10) available with connections: 3/8''FIP ½"FIP(Ø12,Ø14) ¾"FIP M12*1(Short) M12*1(Long) 15MM M15*1(Female) Ø17(DN12) available with connections: ½"FIP(Ø17) ½"MIP ½"FIP(Elbow)(Ø17) ¾"FIP 15MM 22MM

Approval Holder:

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Address

View All Listings by this Company

Manufacturer:

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Address

View All Listings by this Company

Range of EPDM lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2104309

Size:

See model.

Marking:

Kloe, WRAS, date of manufacture (M/Y, Month = A to L, Year L to W).

Installation Requirements:

R001

Expiry date:

30/04/2026

Model:

KLOE-EPDM01 series: Ø12(DN8) available with connections: 3/8''FIP 3/8''FIP(Elbow) ½"FIP(Ø12,Ø14) ½"MIP ½"FIP(Elbow)(Ø12) ¾"FIP M8*1(Short) M8*1(Long) M10*1(Short) M10*1(Long) M12*1(Short) M12*1(Long) 15MM Ø14(DN10) available with connections: 3/8''FIP ½"FIP(Ø12,Ø14) ¾"FIP M12*1(Short) M12*1(Long) 15MM M15*1(Female) Ø17(DN12) available with connections: ½"FIP(Ø17) ½"MIP ½"FIP(Elbow)(Ø17) ¾"FIP 15MM 22MM

Approval Holder:

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Address

View All Listings by this Company

Manufacturer:

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name

Taizhou Kloe Dafeng Plumbing Co, Ltd.

Address

View All Listings by this Company

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2104328

Note:

R008 applies to hoses fitted with white plastic push fittings.

Size:

See model.

Marking:

Tucai, NT, WRAS & date of manufacture (YY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/04/2026

Model:

TAQ MINI // TAQ MINI ACB: hose bore=DN6, End connections= M15X1 Captive Nut, M8X1, 1/2" Captive Nut, M10X1, 3/8 " Captive Nut, 3/8" Elbow, M15X1, Clip10, 1/2" Elbow, Pipe end 10mm, Pipe end 15mm, Clip11. TAQ // TAQ ACB: hose bore=DN8, End connections= M10X1, M15X1, Clip11 , 1/2" Captive Nut, 3/8” Captive Nut, 3/8” Elbow, Compression fitting 12mm, M12X1, 3/8" BSP, 1/2" BSP, Compression fitting 10mm, Compression fitting 15mm, Pipe end 10mm, Pipe end 15mm, 1/2" Elbow, 1/2" valve, Clip10, M15x1 Captive nut, M8X1. TAQ FORTE // TAQ FORTE ACB: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) TAQ SUPER // TAQ SUPER ACB: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.

Approval Holder:

Tucai, S.A.

Company Name

Tucai, S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name

Ningbo Tucai Flexible Pipe Co., Ltd.

Address

No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450

Country

China

General Email

View All Listings by this Company

Chrome plated interlocked stainless steel shower hose with an EPDM inner liner and EPDM gaskets. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2105038

Note:

Open outlet use only.

Size:

½” BSP captive nut x ½” BSP captive nut.

Marking:

Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

FS001-shower hose (500mm-2000mm).

Approval Holder:

Kaiping Fushun Sanitary Ware Co., Ltd

Company Name

Kaiping Fushun Sanitary Ware Co., Ltd

Address

The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City

Country

China

Phone

0750-2707296

General Email

382775085@qq.com

View All Listings by this Company

Manufacturer:

Kaiping Fushun Sanitary Ware Co., Ltd

Company Name

Kaiping Fushun Sanitary Ware Co., Ltd

Address

The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City

Country

China

Phone

0750-2707296

General Email

382775085@qq.com

View All Listings by this Company

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2107803

Size:

See model

Marking:

FQR, year of manufacture (YY) DN & WRAS on ferrule.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

DN6 – DN6W, P6W series: 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN8 – DN8W, P9W series: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN10 – DN10W series: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2” DN13 – DN13W series: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva

Approval Holder:

F.Q.R. Frattini S.R.L.

Company Name

F.Q.R. Frattini S.R.L.

Address

Via Per Borgomanero 71 Briga Novarese (No)

Postcode

28010

Country

Italy

Phone

+39 0322 94100

General Email

fqr3@fqrfrattini.com

View All Listings by this Company

Manufacturer:

F.Q.R. Frattini S.R.L.

Company Name

F.Q.R. Frattini S.R.L.

Address

Via Per Borgomanero 71 Briga Novarese (No)

Postcode

28010

Country

Italy

Phone

+39 0322 94100

General Email

fqr3@fqrfrattini.com

View All Listings by this Company

UWILL range of PVC and PEX lined shower hoses (model UW-MS1003 is PEX lined), (models UW-MS1003 and UW-MS1005) incorporate corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2108803

Note:

Open outlet use only.

Size:

½” captive nut end connections

Marking:

UWILL, WRAS, Year of manufacture (YYYY)

Installation Requirements:

R001

Expiry date:

31/08/2026

Model:

UW-MS1003XX UW-MS1005XX UW-SC2003 End connector size for all models is G1/2 XX means the different outer finish ,XX=01,02,03,04,05,06： 01=CP chrom plating 02=EA electropolishing 03=Brushed nickel plating 04=ORB 05=matte black 06= Natural Brass

Approval Holder:

Xiamen Uwill Sanitary Ware Co., Ltd.

Company Name

Xiamen Uwill Sanitary Ware Co., Ltd.

Address

3rd Floor, #82 Building Middle of Guankou Road Jimei District Xiamen Fujian

Country

China

View All Listings by this Company

Manufacturer:

Xiamen Uwill Sanitary Ware Co., Ltd.

Company Name

Xiamen Uwill Sanitary Ware Co., Ltd.

Address

3rd Floor, #82 Building Middle of Guankou Road Jimei District Xiamen Fujian

Country

China

View All Listings by this Company

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2104339

Note:

R008 applies to hoses fitted with white plastic push fittings.

Size:

See model.

Marking:

Kingfisher brand logo, WRAS & date of manufacture (YY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/04/2026

Model:

FLOMASTA: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) FLOMASTA: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies available in a range of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2109052

Size:

DN6 bore diameter hose available with end connections: 3/8” BSP (F), 1/2” BSP (F), M8X1 (M), M10X1 (M), M15X1 (M) or M15X1 (F) DN8 bore diameter hose available with end connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), M8X1 (M), M10X1 (M), M12X1 (M), 15mm Compression or M15X1 (F)

Marking:

WRAS, Hengle and date of manufacture (YYYY) on sleeve

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

HL-SS-E

Approval Holder:

Zhejiang Hengle Sanitary Co., Ltd.

Company Name

Zhejiang Hengle Sanitary Co., Ltd.

Address

Ganjiang Industrial, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hengle Sanitary Co., Ltd.

Company Name

Zhejiang Hengle Sanitary Co., Ltd.

Address

Ganjiang Industrial, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

‘PARINOX/STRONGFLEX S-200' range of stainless-steel braided EPDM lined flexible hose with various end connections (see model). Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2201803

Size:

Hose sizes DN6: 15x1 (F) elbow, ⅜” and ½” BSP (F), 15x1 (F), Tube TL ø10mm, Male MOK M8 and M10, ⅜” and ½” BSP (M). Hose sizes DN8: ⅜” and ½” BSP (F) elbow, ⅜” and ½” BSP (F), Tube TL ø10mm, Male MOK M10 and M15, ⅜” and ½” BSP (M), Comp. joint ø10mm and ø12mm. Hose sizes DN10: ½” and ¾” BSP (F) elbow, ⅜”, ½” and ¾” BSP (F), Tube TL ø15mm, Male MOK M12, ⅜”, ½” and ¾” BSP (M), Comp. joint ø15mm. Hose sizes DN13: ½” and ¾” BSP (F) elbow, ½” and ¾” BSP (F), ½” and ¾” BSP (M), Tube TL ø15mm, Comp. joint ø15mm.

Marking:

PARINOX. WRAS, DN, maximum temperature, maximum pressure, and date of manufacture (YYMM) on crimp connection. ( Hoses produce in Neoperl Italia). IM. WRAS, DN, maximum temperature, maximum pressure, and date of manufacture (XX), Production Site (PS) on crimp connection. ( Hoses produce in Neoperl Bulgaria or India).

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

‘Parinox range: Part Code nomenclature constructed in the following manner: AAA.BBBBBB.CCC AAA = braiding specification including configuration of colour bands: DN6 = 288, R88, B88. DN8 - 287, R87, B87. DN10 = 282, R82, B82. DN13 = 283. BBBBBB = Manufacturing alphanumeric string. CCC = Length of the hose in mm: 500 = 500mm, U20 = 1200mm, D50 = 2500mm, T50 = 3500mm, Q00 = 4000mm. Models added January 2024 Strongflex S-200 range: Part Code nomenclature constructed in the following manner: AAACCCBBB AAA =Diameter Specification DN6 = 352 DN8 = 350 DN10 = 354 DN13 = 355 CCC = Length of the hose in mm BBB= Fittings terminals combination

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl Bulgaria EOOD & Neoperl Italia S.R.L & Neoperl India Pvt.LTD

Company Name

Neoperl Bulgaria EOOD & Neoperl Italia S.R.L & Neoperl India Pvt.LTD

Address

Pop Bogomil Str N1B 09301 Dobrich

Country

Bulgaria

General Email

View All Listings by this Company

Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2109011

Size:

See model

Marking:

GOLOY, WRAS and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M15 (M) inlet-1/2" BSP conical nut models: Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment 1/2" BSP captive nut inlet x 1/2" BSP conical nut outlet models: PVC hose: HC11 50~250cm Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment Stainless Steel Double lock hose HXXXXX 50~250cm 1st X stands for materials of inner tube: A=PVC B=EPDM P=PEX 2nd X stands for inner diameter: 7=DN7 10=DN10 3rd X stands for materials of outer tube: 1=SUS201 2=SUS202 3=SUS304 4th X and 5th X stands for colour of surface treatment: 01=electrolysis 02=chrome plated 03=matt black 04=ORB 05=green bronze 06=antique brass 07=golden 08=karat gold 09=rose gold 10=red bronze 11=drawing nickel

Approval Holder:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

3rd and 4th Floors, No.18-10, Xiafei Road Xiamen

Postcode

361026

Country

China

General Email

yonghuacheng@wdiplumbing.com

View All Listings by this Company

Manufacturer:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

3rd and 4th Floors, No.18-10, Xiafei Road Xiamen

Postcode

361026

Country

China

General Email

yonghuacheng@wdiplumbing.com

View All Listings by this Company

OH Softpex® range of polyethylene lined outlet hoses with stainless steel and polyamide braiding (length 100 to 1000 mm), with various end connections. The hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110340

Note:

Open outlet use only

Size:

DN6, DN8

Marking:

Neoperl, date (YYMMDD) on crimp

Installation Requirements:

R001 R008

Expiry date:

31/10/2026

Model:

OH Softpex® range; Part code: 39.90CD.EFG.HI Connection Sizes Quick connectors SQC Female M15 x 1 Male M8, M10, M12 Plugin D8 39.90CD.EFG.HI OH Softpex® Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

EPDM lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204700

Size:

See model

Marking:

HRN’, ‘WRAS’ and date of manufacture (YY/MM) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 134-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of multi-layered flexible hoses (TPE inner liner/PVC middle/PVC outer with polyester braiding in-between) and stainless-steel braided EPDM flexible hoses. The hoses are supplied with a variety of end connections incorporating brass barbed hose inserts or white plastic barbed hose inserts. The hoses may also incorporate a servicing valve (see model). The push fit connectors are to be used with copper pipe (Manufactured to EN1057), PB pipe (Manufactured to BS EN21003) & PE-x pipe (manufactured to BS EN7291-3). Products shown with a “P” suffix (eg. WFLX15P, FLX43P) are a prepacked variant of the original product eg. WFLX15, FLX43. Products shown with a “SB” suffix (eg. FLX15P-SB, WFLX28-SB) are a reduced box quantity of an existing product. Maximum working pressure and operating temperature: 12.0 bar @ 20°C and 6.0 bar @ 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110096

Size:

See model.

Marking:

John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), WRAS, date of manufacture (YYWW), maximum temperature and pressure on hose. John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), size and maximum temperature on connector. Markings added December 2022: WRAS & DoM (YYYY) on ferrule (braided hoses only) or WRAS, DoM (YYYY) & other technical info on hose body (non-braided hoses only). JG (John guest Logo), Size and Max Temperature on Pushfit Connector (When applicable). JG (John guest Logo) and Size on Service Valve (when applicable).

Installation Requirements:

R001 R008

Expiry date:

31/10/2026

Model:

Speedfit x Union Nut 300mm hose: WFLX15: 15mm push-fit x ½” BSP captive nut WFLX16: 15mm push-fit x ¾” BSP captive nut WFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 500mm hose: WFLX18: 15mm push-fit x ½” BSP captive nut WFLX20: 15mm push-fit x ¾” BSP captive nut WFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 1000mm hose: WFLX40: 15mm push-fit x ½” BSP captive nut Speedfit x Union Nut with Service Valve: 300mm hose: WFLX37-H: 15mm push-fit x ½” BSP captive nut service valve hose WFLX39-H: 22mm push-fit x ¾” BSP captive nut service valve Hose Speedfit x Speedfit: 300mm hose: WFLX33: 10mm push-fit x 15mm push-fit WFLX17: 15mm push-fit x 15mm push-fit Speedfit x Speedfit: 500mm hose: WFLX21: 15mm push-fit x 15mm push-fit Elbow Pattern: 300mm hose: WFLX36: 15mm push-fit x ½” BSP captive nut Elbow Speedfit x Hand Tighten Nut: 300mm hose: PFLX15: 15mm push-fit x ½” BSP captive nut PFLX16: 15mm push-fit x ¾” BSP captive nut PFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Nut: 500mm hose: PFLX18: 15mm push-fit x ½” BSP captive nut PFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Union Nut with Service Valve: 300mm hose: PFLX37: 15mm push-fit x ½” BSP captive nut service valve hose PFLX37-H: 15mm push-fit x ½” BSP captive nut service valve with handle hose Speedfit x Hand Tighten Union Nut with Service Valve: 500mm hose: PFLX78: 15mm push-fit x ½” BSP captive nut service valve hose Extra Flexi Speedfit x Hand tighten Nut: 300mm hose: PFLX88: 15mm push-fit x ½” BSP captive nut Speedfit with Plastic Valve with Handle x Bulkhead connection: 429mm hose: NCWFLX54-H: 15mm push-fit service valve x ½” BSP bulkhead Speedfit with Elbow Plastic Valve with Handle x Bulkhead connection: 530mm hose: NCWFLX58-H: 15mm push-fit x ½” BSP Elbow Service Valved hose Speedfit with Plastic Valve with Handle x Hand Tighten Union Nut: 342mm hose: NCWFLX37-H: 15mm Plastic Valved Hose Connector x ½” Flexi Hose Models added December 2022. Speedfit x Union Nut: 300mm hose: WFLX15-SB: 15mm push-fit x ½” BSP captive nut, 300mm hose. WFLX16-SB: 15mm push-fit x ¾” BSP captive nut, 300mm hose. WFLX22-SB: 22mm push-fit x ¾” BSP captive nut, 300mm hose. For Monobloc Mixers WFLX28: 15mm push-fit x M10 monobloc hose kit, 300mm hose. WFLX29: 15mm push-fit x M12 monobloc hose kit, 300mm hose. Speedfit with Shut Off Valve and Hand Tighten Union Nut x Bulkhead, Short. NCWFLX98-H: 1/2” bsp BULKHEAD x 1/2 bsp Shut Off Valve Flexi Hose. (Short). SPEEDFIT X UNION NUT: 100mm hose FLX43: 15mm pushfit x ½” captive nut - 150mm hose SPEEDFIT X UNION NUT: 300mm hose FLX35, FLX35P: 15mm pushfit x ⅜” captive nut - 300mm hose FLX15, FLX15P, FLX15P-SB: 15mm pushfit x ½” captive nut - 300mm hose FLX16, FLX16P, FLX16P-SB: 15mm pushfit x ¾” captive nut - 300mm hose FLX22, FLX22P, FLX22P-SB: 22mm pushfit x ¾” captive nut - 300mm hose SPEEDFIT X UNION NUT: 500mm hose FLX18, FLX18P, FLX18P-SB: 15mm pushfit x ½” captive nut - 500mm hose FLX20, FLX20P, FLX20P-SB: 15mm pushfit x ¾” captive nut - 500mm hose FLX19, FLX19P, FLX19P-SB: 22mm pushfit x ¾” captive nut - 500mm hose. FLX23, FLX23P: 22mm pushfit x ¾” captive nut - 500mm hose SPEEDFIT X UNION NUT: 1000mm hose FLX40, FLX40P: 15mm pushfit x ½” captive nut - 1000mm hose FLX42, FLX42P: 15mm pushfit x ¾” captive nut - 1000mm hose FLX41, FLX41P: 22mm pushfit x ¾” captive nut - 1000mm hose SPEEDFIT X UNION NUT WITH SERVICE VALVE FLX37, FLX37P, FLX37P-SB: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve, FLX39, FLX39P: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve, FLX37-H: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve and handle FLX39-H: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve and handle, SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 300mm hose FLX24, FLX24P, FLX24P-SB: 15mm pushfit x ½” captive nut - 300mm – Service Valve FLX25, FLX25P: 22mm pushfit x ¾” captive nut - 300mm – Service Valve.   SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 500mm hose FLX31, FLX31P: 15mm pushfit x ½” captive nut - 500mm – Service Valve, FLX38, FLX38P: 15mm pushfit x ¾” captive nut - 500mm – Service Valve, SPEEDFIT X SPEEDFIT- 300mm hose FLX33P: 10mm pushfit x 15mm pushfit - 300mm hose FLX17, FLX17P, FLX17P-SB: 15mm pushfit x 15mm pushfit - 300mm hose FLX26, FLX26P: 22mm pushfit - 22mm pushfit - 300mm hose SPEEDFIT X SPEEDFIT- 500mm hose FLX21, FLX21P FLX21P-SB: 15mm pushfit x 15mm pushfit - 500mm hose FLX27, FLX27P: 22mm pushfit - 22mm pushfit - 500mm hose SPEEDFIT X SPEEDFIT- 1000mm hose FLX47: 15mm pushfit x 15mm pushfit - 1000mm hose SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 300mm hose FLX44, FLX44P: 15mm pushfit x 15mm pushfit - 300mm hose – Service Valve SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 500mm hose FLX45, FLX45P: 15mm pushfit x15mm pushfit - 500mm hose – Service Valve SPEEDFIT X MALE FLX49: 15mm pushfit x ⅜” captive nut - 300mm hose SPEEDFIT X PLAIN STEM FLX53: 15mm pushfit x 15mm tube stem - 300mm hose ELBOW PATTERN FLX36, FLX36P, FLX36P-SB: 15mm pushfit x ½” captive nut (elbow) - 300mm hose, FOR MONOBLOC MIXERS-300mm hose FLX48: 12mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX28: 15mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX29, FLX29-SB: 15mm pushfit x M12 male thread - Monobloc Kit-300mm hose Pre-packaged models have a ‘P’ suffix, e.g. WFLX15P.

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of PVC and PEX lined shower hose with EPDM washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2108808

Note:

Open outlet use only.

Size:

½” captive nut end connections

Marking:

Bristan on ferrule

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

UW-SC2003 shower hoses.

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2201021

Size:

See Model

Marking:

WRAS, Haoying and date of manufacture (MM/YY) on ferrule

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

B-EPDM-2-2: ⅜” BSP (F) x ⅜” BSP (F), B-EPDM-3-3: ½” BSP (F) x ½” BSP (F), B-EPDM-2-12: ⅜” BSP (F) x M8x1, B-EPDM-2-13: ⅜” BSP (F) x M10x1, B-EPDM-3-17: ½” BSP (F) x M13x1, B-EPDM-3-12: ½” BSP (F) x M8x1, B-EPDM-3-13: ½” BSP (F) x M10x1. Available with a nominal diameter or either DN8 or DN10, and a length of 15 to 150cm.

Approval Holder:

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Address

NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

Stainless steel braided EPDM lined flexible hoses assemblies incorporating various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2112355

Size:

See model

Marking:

Flexitub (brand of Eurosanitary), date of manufacture (YYYYMM), WRAS, DN on crimped connector.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

B1/2":15 - F1/2" DN10: 15mm compression x 1/2" captive nut, length 15~200cm B1/2":15(vavle) - F1/2" DN10: 15mm compression and valve x 1/2" captive nut, length 20~200cm B1 1/8”:22- F3/4" DN13: 22mm compression x 3/4" captive nut, length 20~200cm

Approval Holder:

Eurosanitary Ningbo Co Ltd

Company Name

Eurosanitary Ningbo Co Ltd

Address

Zone A China European Industrial Park Cixi City China

View All Listings by this Company

Manufacturer:

Eurosanitary Ningbo Co Ltd

Company Name

Eurosanitary Ningbo Co Ltd

Address

Zone A China European Industrial Park Cixi City China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2211700

Size:

see model

Marking:

IDC Fluid Control logo (E), WRAS and year of manufacture on crimp connection

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

½“ compression x ½" (F) BSP captive nut: SCFA551 - DN10 SCFA553 - DN13 SCFC558 - DN8 SCFC553 - DN13 ¾“ compression x ¾" (F) BSP captive nut: SCFA773 - DN13 SCFC773 - DN13 SCFC779 - DN19

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

General Email

View All Listings by this Company

Range of stainless steel braided, PEX lined flexible hose assemblies with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2203038

Size:

see model

Marking:

Yabo, WRAS and year of manufacture on crimped connector.

Installation Requirements:

R001 R008

Expiry date:

31/03/2027

Model:

YB-AxA-*** “A” denotes the type of nut/connection fitting and can be replaced with any of the following: F3/8; F1/2; F3/4; M3/8; M1/2; M3/4 – BSP M8*1; M10*1; M12*1; M15*1 The suffix “***” denotes length and can be replaced with a number between 20 and 250 (cm)

Approval Holder:

Kaiping Shuikou Town Yabo Sanitary Ware Factory

Company Name

Kaiping Shuikou Town Yabo Sanitary Ware Factory

Address

5th of No.6 Zhongxing Road, Water heating City, Shuikou Town, Kaiping City, Guangdong Province

Country

China

View All Listings by this Company

Manufacturer:

Kaiping Shuikou Town Yabo Sanitary Ware Factory

Company Name

Kaiping Shuikou Town Yabo Sanitary Ware Factory

Address

5th of No.6 Zhongxing Road, Water heating City, Shuikou Town, Kaiping City, Guangdong Province

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110018

Size:

See model

Marking:

Yaoyao, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

YY-SS-E1: DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. YY-SS-E2: DN8 bore: 15mm compression, ⅜” & ½” captive nut. DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. DN17 & DN19 bore: 22mm compression, ¾” captive nut. YY-SS-E3: DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). YY-SS-E4: DN10 bore: 15mm compression with isolation valve, 15mm pushfit. DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. YY-SS-E7: DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. YY-SS-E8: DN8 bore: 15mm compression, ⅜” & ½” BSP (M). DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). DN17 & DN19 bore: 22mm compression, ¾” BSP (M). YY-SS-E9: DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. YY-SS-E10: DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. YY-SS-E11: DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit. DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. YY-SS-E12: DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:

Taizhou Yaoyao Metal Hose Co., Ltd.

Company Name

Taizhou Yaoyao Metal Hose Co., Ltd.

Address

Qinggang Industrial Zone Yuhuan Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Yaoyao Metal Hose Co., Ltd.

Company Name

Taizhou Yaoyao Metal Hose Co., Ltd.

Address

Qinggang Industrial Zone Yuhuan Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110112

Size:

See model

Marking:

Company logo "S", WRAS, and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

SS-E1: DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. SS-E2: DN8 bore: 15mm compression, ⅜” & ½” captive nut. DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. DN17 & DN19 bore: 22mm compression, ¾” captive nut. SS-E3: DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). SS-E4: DN10 bore: 15mm compression with isolation valve, 15mm pushfit. DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. SS-E7: DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. SS-E8: DN8 bore: 15mm compression, ⅜” & ½” BSP (M). DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). DN17 & DN19 bore: 22mm compression, ¾” BSP (M). SS-E9: DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. SS-E10: DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. SS-E11: DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit. DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. SS-E12: DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:

Ningbo Safewell Plumbing Co. Ltd.

Company Name

Ningbo Safewell Plumbing Co. Ltd.

Address

199 Xiangyun North Road Ningbo Hi-Tech Zone Zhejiang

Country

China

View All Listings by this Company

Range of EPDM or PVC lined flexible hose assemblies with either nylon braided, or chrome plated interlocking outer layer (see models). Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204017

Note:

Open outlet use only.

Size:

M15x1 x ½” BSP (F) Conical nut

Marking:

WRAS, Haoying and date of manufacture (MM/YY).

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Chrome plated interlocking outer layer: CS-PVC-15-3 (DN8), CS-PVC-15-3 (DN10). Nylon braided: CN-EPDM-15-3 (DN8), CN-EPDM-15-3 (DN10).

Approval Holder:

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Address

NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

Manufacturer:

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Address

NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

Stainless steel braided, silicone lined flexible hose assembly with brass end connections Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204063

Size:

DN10 bore diameter. ½” BSP Captive Nut (M) end connection

Marking:

MRG, WRAS, DN10 and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/04/2027

Model:

X312D1DW.XXX ‘XXX’ denotes the length of the hose between 15cm & 200cm.

Approval Holder:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 Gozzano

Postcode

28024

Country

Italy

Phone

+39 0322 94131

General Email

info@mrgspa.com

View All Listings by this Company

Manufacturer:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 Gozzano

Postcode

28024

Country

Italy

Phone

+39 0322 94131

General Email

info@mrgspa.com

View All Listings by this Company

Stainless-steel interlocked shower hose incorporating an EPDM inner liner and EPDM washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204068

Note:

Open outlet use only

Size:

½” BSP captive nut inlet x outlet

Marking:

M&J, WRAS and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

MJ-S-E Available in the following surface finishes: Chrome plated finish Gold finish Black finish Gunmetal finish White finish

Approval Holder:

Taizhou M&J Sanitary Ware Co., Ltd.

Company Name

Taizhou M&J Sanitary Ware Co., Ltd.

Address

Luqiao District, Taizhou City, Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel inter-locked and PVC braided PVC lined flexible hose assemblies. Maximum operating temperature 65.0°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204050

Note:

Open outlet use only

Size:

¾” Captive nut x ¾” Captive nut (LS-PVC-4-4 model) ½” Captive nut x ½” Captive nut (All other models)

Marking:

WRAS, HAOYING and date of manufacture (MM/YY) on captive nut.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Stainless-steel inter-locked braided models: LS-PVC-3-3 LS-PVC-4-4 LB-PVC-3-3 PVC braided models: LP-PVC-3-3

Approval Holder:

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Address

NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

Manufacturer:

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name

Ningbo Haoying Sanitary Ware Technology Co., Ltd

Address

NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

Range of brass interlocked shower hoses (various finishes - see model) with TPE inner liner and NBR washers. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2210701

Size:

See model.

Marking:

Lefroy Brooks (Lion) logo on ferrule (hexagonal nut end).

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

XX2101YY: ½” hexagonal BSP nut inlet x outlet, XX2121YY: ½” BSP conical nut x ½" BSP hexagonal nut, XX2103YY: ½” BSP conical nut x ½" BSP hexagonal nut, XX2100YY: ½” hexagonal BSP nut inlet x outlet, XX2116YY: ½” BSP conical nut x ½" BSP hexagonal nut. Where: XX is replaced with letters to denote range: LB - Classic range. YY is replaced with appropriate letters that represent the finish/colour. Examples are (but not limited to): CP - Polished Chrome, NK - Polished Nickel, BC - Brushed Chrome, BN - Brushed Nickel, PB - Polished Brass, BPB - Brushed Brass, AB - Aged Brass, TA - Taunton, AG - Antique Gold, HRG - Hard Rubbed Gold, CM - Champagne Gold, BCM - Brushed Champagne Gold, CO - Copper, MBC - Matt Black Chrome.

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110120

Size:

See model

Marking:

Valtech, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

FH-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. FH-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. FH-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. FH-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. FH-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. FH-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. FH-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). FH-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). FH-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). FH-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). FH-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. FH-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. FH-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. FH-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. FH-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. FH-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). FH-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). FH-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. FH-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. FH-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. FH-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. FH-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. FH-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit FH-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. FH-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. FH-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). FH-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). FH-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of stainless-steel interlocked shower hoses (various finishes (see model) incorporating an EDPM liner and NBR washers. Maximum working temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2201027

Note:

Open outlet use only.

Size:

½" BSP captive nut inlet and outlet.

Marking:

Connection 1 (G1/2 Hexagon nut): Delmei, WRAS and year of manufacture (YYYY) on nut. Connection 3 (G1/2 External ‘O’-ring speaker connector): Delmei, WRAS and year of manufacture (YYYY) on conical nut. Connection 5 (G1/2 Full vertical wire connector): Delmei, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Models: DH-A-B-CC-D 15cm-250cm A denotes inner diameter: 1 - 6-7mm, 2 - 7-8mm, 3- 7-9mm, 4- 10 -12mm, 5- 11 -12mm. B denotes core 1 brass, 2 stainless steel. C denotes connectors for each end: 1 G1/2 Hexagon nut, 2 G1/2 knurled nut, 3 G1/2 External ‘O’- ring speaker connector, 4 G1/2 knurled horn connector, 5 G1/2 Full vertical wire connector. PLEASE NOTE The product is not available with connection 2 or connection 4 at both ends, or combined, e.g. connection 2 at one end and connection 4 at the other. Connections 2 and 4 will always be provided with connections 1, 3 or 5 at the other end. D denotes surface finish: 1 CP, 2 MB, 3 BN, 4 EA, 5 ORB, 6 Imitation gold Example model code: DH -1-1-14-2 250cm DH shower hose with 6-7mm inner diameter, brass core, G1/2 Hexagon nut x G1/2 knurled horn connector, MB finish, 250cm length.

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Manufacturer:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Range of stainless steel interlocked (H35 models) or nylon braided (H36 models) flexible hose assemblies. H35 models are available with either a silicone or TPE liner, the H36 models are available with a TPE liner only. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2210035

Note:

IRN R008 only applies to H36 models. Open outlet use only.

Size:

See model

Marking:

SOLEX, WRAS and date of manufacture (MM/YY) on conical nut

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

H35X0001S: The following suffixes are added to the model code to denote hose type and connections: -02: Metal hose, 1/2" BSP (F) ANTIWIST x M15 (M), -03: Metal hose, 1/2" BSP (F) x M15 (M), -04: Metal hose, M20 (F) x M15 (M). H36X0001S: The following suffixes are added to the model code to denote hose type and connections: -02: braided hose, 1/2" BSP (F) ANTIWIST x M15 (M), -03: braided hose, 1/2" BSP (F) x M15 (M), -04: braided hose, 1/2" BSP (F) ball joint x M15 (M), -02QC: braided hose, 1/2" BSP (F) ANTIWIST x 11mm QC fitting, -03QC: braided hose, 1/2" BSP (F) x 11mm QC fitting, -04QC: braided hose, 1/2" BSP (F) ball joint x 11mm QC fitting. Hose length can either be denoted by the length in mm after the model code, or by replacing the X. Using 1500mm as an example the code can either be: H35X0001S 1500mm or H3515000001S followed by one of the suffixes above.

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Range of stainless steel or nylon braided, PEX or EPDM inner liner flexible hose assemblies available in a range of various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2210319

Note:

R008 only applies to PEX lined hoses (GA-IL-01 series)

Size:

see model

Marking:

WRAS, year of manufacture (YYYY) and Gaoao stamped on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

GA-IL-01 series: PEX inner hose Outer hose available with: Stainless steel braiding with no color or Stainless steel braiding with red color or Stainless steel braiding with blue color. Inner hose: DN6(Φ9), DN6(Φ10), DN8 or DN10. End connections: G3/8 (Type 1), G3/8 (Type 2), G1/2 (Type 1), G3/4, M8x1, M10x1 (Type 1), M12x1 (Type 1). GA-PO-01 series: EPDM inner hose Outer hose available with: Stainless steel braiding or Nylon braiding. Inner hose: DN6(Φ9), DN6(Φ10) or DN8. End connections: G3/8 (Type 2), G1/2 (Type 2), G1/2 (Type 3), G1/2 (Type 4), G1/2 (Type 5), M10x1(Type 2), M12x1 (Type 2), M12x1 (Type 3), M15x1.

Approval Holder:

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Postcode

318020

Country

China

General Email

2900324142@qq.com

View All Listings by this Company

Manufacturer:

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Postcode

318020

Country

China

General Email

2900324142@qq.com

View All Listings by this Company

Range of stainless steel or nylon braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2210345

Size:

DN6 hoses available with the following end connections 8x1, 8x0,75, 10x1, 11x1, 12x1, 15x1, 14x1, F3/8, F1/2, F15x1, F14x1, F9/16, M3/8, M1/2, NPB Ø15, Ø15 c.o, F3/8 c/curva, F1/2 c/curva, F1/2 conical, T8 DN8 available with the following end connections 10x1, 11x1, 12x1, 15x1, 14x1, F3/8 F1/2, F3/4, F15x1; F14x1; F9/16; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; T8 DN10 hoses available with the following end connections: 12x1; F3/8; F1/2; F3/4; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; DN13 hoses available with the following end connections: F1/2; F3/4; M1/2; M3/4; F1/2 c/curva;

Marking:

FQR, date of manufacture (YY) & WRAS on ferrule

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

Series DN6K Series DN6KL Series DN6KZ Series P6K Series P6KL Series P6KZ Series DN8K Series DN8KL Series DN8KZ Series DPV8K Series DPV8KL Series DPV8KZ Series P9K Series P9KL Series P9KZ Series DN10K Series DN10KL Series DN10KZ Series DN13K Series DN13KL Series DN13KZ

Approval Holder:

F.Q.R. Frattini S.R.L.

Company Name

F.Q.R. Frattini S.R.L.

Address

Via Per Borgomanero 71 Briga Novarese (No)

Postcode

28010

Country

Italy

Phone

+39 0322 94100

General Email

fqr3@fqrfrattini.com

View All Listings by this Company

Manufacturer:

F.Q.R. Frattini S.R.L.

Company Name

F.Q.R. Frattini S.R.L.

Address

Via Per Borgomanero 71 Briga Novarese (No)

Postcode

28010

Country

Italy

Phone

+39 0322 94100

General Email

fqr3@fqrfrattini.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103343

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

JL-F1400120012487 & JL-140038003813

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2207056

Size:

See model.

Marking:

M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

MJ-SS-E (stainless steel braided) & MJ-SS-E (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.

Approval Holder:

Taizhou M&J Sanitary Ware Co., Ltd.

Company Name

Taizhou M&J Sanitary Ware Co., Ltd.

Address

Luqiao District, Taizhou City, Zhejiang

Country

China

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2211707

Size:

see model

Marking:

PC, WRAS and year of manufacture on crimp connection Plumb Centre on end

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

½“ compression x ½" (F) BSP captive nut: 81891 300mm & 81832 500mm - DN10 81884 300mm & 8188 500mm - DN8 ¾“ compression x ¾" (F) BSP captive nut: 81879 500mm & 81885 300mm - DN13

Approval Holder:

Grafton Merchanting

Company Name

Grafton Merchanting

Address

Ashfield Naas Road Dublin 22 Ireland

View All Listings by this Company

‘TAQ’ range of stainless steel or grey nylon braided (indicated by ACB in model name), EPDM lined flexible hose assemblies, incorporating various end connections. Some of the possible end connections also incorporate EPDM washers, gaskets or ‘O’-rings. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2308800

Size:

see models

Marking:

Tucai, TB, WRAS, YY.

Installation Requirements:

R001 R008

Expiry date:

31/08/2028

Model:

TAQ MINI and TAQ MINI ACB: DN6 hoses, available with M8x1, M10x1, 1/2" Captive Nut, 3/8" Captive Nut, Clip 10, 1/2"BSP (M), 3/8” BSP (M), M15x1 Captive nut and Elbow nut ½”. TAQ and TAQ ACB: DN8 hoses, available with M10x1,1/2" Captive Nut, M12x1, 1/2"BSP (M), Compression fitting 15mm, spigot 10mm, spigot 15mm, M8x1, 3/8" Captive Nut, 3/8” BSP (M), Elbow nut 3/8” Elbow nut ½”, M15x1 Captive nut, ¾” Captive nut, 1/2" valve, Compression fitting 10 mm, 3/4" nut Elbow, Elbow ER, Clip 10. TAQ FORTE and TAQ FORTE ACB: DN10 hoses, available with Compression fitting 15mm, 1/2" Captive Nut, 3/4" Captive Nut, 1/2" BSP (M), spigot 10mm, 3/4" nut Elbow, spigot 15mm, Clip 10, 3/8" Captive Nut, 1/2" valve, Elbow ER, 1/2" nut Elbow, M15x1 Captive nut, M12x1, Elbow nut 3/8”, 3/4" BSP (M), Compression fitting 10mm. TAQ SUPER // TAQ SUPER ACB: DN13 hoses, available with 1/2" nut Elbow, 3/4" nut Elbow, 1/2" BSP (M), 3/4" BSP (M), 1/2" Captive Nut, 3/4" Captive Nut, spigot15mm, Compression fitting 15mm.

Approval Holder:

Tucai, S.A.

Company Name

Tucai, S.A.

Address

Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)

Country

Spain

Phone

+34 93 718 95 62

General Email

info@tucai.com

View All Listings by this Company

Manufacturer:

Tucai Bulgaria SP Ltd.

Company Name

Tucai Bulgaria SP Ltd.

Address

7538 Aydemir Village 39 Chernozem Street Silistra Region

Country

Bulgaria

General Email

View All Listings by this Company

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2212019

Size:

½" BSP (F) conical nut end connections.

Marking:

Jetom, WRAS, and date of manufacture (YYYY.M.D) on end connector.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

H3DFG-XXXX01C & H3DFG-XXXX68C With XXXX denoting length 20-200cm.

Approval Holder:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301032

Size:

See model below.

Marking:

MRG, WRAS, DN & year of production (YYYY).

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

X3303IW (DN10 Stainless steel F 1/2” BSP X F 3/4” BSP), X3329IW (DN10 Stainless steel F 1/2” BSP X FC 1/2” BSP), X4300IW (DN13 Stainless steel F 1/2” BSP X F 1/2” BSP), X4328IWG (DN13 Stainless steel M 3/4” BSP X F 3/4” BSP), X4330IWG (DN13 Stainless steel F 3/4” BSP X FC 3/4” BSP). Model added February 2024 X4309IWG (DN13 Stainless steel F 3/4" BSP X F 3/4" BSP)

Approval Holder:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 Gozzano

Postcode

28024

Country

Italy

Phone

+39 0322 94131

General Email

info@mrgspa.com

View All Listings by this Company

Manufacturer:

M.R.G. S.r.l.

Company Name

M.R.G. S.r.l.

Address

Via per Baraggia, 1 Gozzano

Postcode

28024

Country

Italy

Phone

+39 0322 94131

General Email

info@mrgspa.com

View All Listings by this Company

Range of interlocked shower hoses with EPDM seals and various finishes.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301068

Size:

½” BSP captive nut x ½” BSP captive nut

Marking:

HG and WRAS on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

28 132 xxx Hansgrohe Sensoflex Metal Shower hose 125 cm 28 133 002 Hansgrohe Sensoflex Shower hose 1,50m 28 175 002 Hansgrohe Sensoflex Shower hose 1,50m 28 136 xxx Hansgrohe Sensoflex Metal Shower hose 160 cm 28 135 002 Hansgrohe Sensoflex Shower hose 1,75m 28 134 xxx Hansgrohe Sensoflex Metal Shower hose 200 cm 28 134 002 Hansgrohe Sensoflex Shower hose 2,00m 28 177 002 Hansgrohe Sensoflex Shower hose 2,00m available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2301349

Size:

DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.

Marking:

SG, WRAS & year of manufacture YYYY on ferrule

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

SG-EPDM-01 series

Approval Holder:

Taizhou SG Hose Co., Ltd.

Company Name

Taizhou SG Hose Co., Ltd.

Address

Shamen Bingang Industrial City, Yuhuan City, Zhejiang Province, China

View All Listings by this Company

Manufacturer:

Taizhou SG Hose Co., Ltd.

Company Name

Taizhou SG Hose Co., Ltd.

Address

Shamen Bingang Industrial City, Yuhuan City, Zhejiang Province, China

View All Listings by this Company

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303333

Size:

SEE MODEL

Marking:

HL, WRAS and year of manufacture (YYYY) on crimp connection.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

HL16W-EPDM-01 series: Bore diameter DN8 available with end connections: M8x1, M8x1.25, M10x1, M12x1, M14x1, M15x1, 3/8”, ½”, ¾” & 15mm. Bore diameter DN10 available with end connections: M10x1, M12x1, 3/8”, ½”, ¾”, 15mm & 22mm. Bore diameter DN13 available with end connections: ½”, ¾”, 15mm & 22mm.

Approval Holder:

Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Company Name

Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Address

View All Listings by this Company

Manufacturer:

Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Company Name

Yuhuan Hengli Plumbing Manufacturing Co.,LTD

Address

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303014

Size:

DN9: ½” BSP (F) Captive nut, M10x1, ½” Compression, ½” BSP (M) or M12x1. DN9.5: ½” BSP (F) Captive nut, ½” BSP (F) Captive Nut with ISO valve M10x1, ½” Compression with ISO valve, ½” BSP (M) or M12x1. DN12.5: ½” BSP (F) Captive nut, 3/4” BSP (F) Captive nut, ½” Compression, ¾” Compression, ½” BSP (M) or ¾” BSP (M).

Marking:

Ivanci logo (trademark of Zhejiang Fansheng Fluid Control Co., LTD), WRAS & date of manufacture (MMYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

RCC.L

Approval Holder:

Zhejiang Fansheng Fluid Control Co., LTD

Company Name

Zhejiang Fansheng Fluid Control Co., LTD

Address

Putian Industrial Area Chumen Area Yuhuan City Zhejiang Province

Postcode

317605

Country

China

View All Listings by this Company

Range of stainless steel interlocked shower hoses with an EPDM inner liner and EPDM washers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303311

Note:

Open outlet use only.

Size:

½” BSP nut (various types, see model).

Marking:

Binyang on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

SS112-A-A-**-**-** Where: A = end connection (type and fitting): 1. Conic nut smooth, 2. Conic nut smooth, 3. Conic nut with ‘O’-ring, 4. Conic nut with ‘O’-ring, 5. Ball nut, 6. Hex nut, 7. Knurl nut. The first suffix “**” represents the material of inner tube: EPDM. The second suffix “**” represents the length: 50cm-200cm. The third suffix “***” represents surface finish: CP: Chrome plated, BN: Brushed Nickel, MB: Matte Black, ORB: Oil Rubber Bronze, EP: Polish, G: Gold. Example code: SS112-1-3-EPDM-200-CP = Conic nut smooth at one end, Conic nut with ‘O’-ring at the other, EPDM inner hose, 200cm long and chrome plated.

Approval Holder:

Xiamen Binyang Sanitary Ware Co., Ltd.

Company Name

Xiamen Binyang Sanitary Ware Co., Ltd.

Address

4/F, No. 588 Tongming Road, Industrial Concentration Zone, Tong’an District, Xiamen.

Country

China

Phone

+86-0592-7258165

General Email

357034425@qq.com

View All Listings by this Company

Manufacturer:

Xiamen Binyang Sanitary Ware Co., Ltd.

Company Name

Xiamen Binyang Sanitary Ware Co., Ltd.

Address

4/F, No. 588 Tongming Road, Industrial Concentration Zone, Tong’an District, Xiamen.

Country

China

Phone

+86-0592-7258165

General Email

357034425@qq.com

View All Listings by this Company

Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2109068

Size:

See model

Marking:

GOLOY, WRAS and date of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

WM-BB02, WM-BB02-CH, WM-BB02-BN, WM-BB02-BL, WM-BB02-BZ & WM-BB02-BB M15 (M) inlet-1/2" BSP conical nut models: Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment 1/2" BSP captive nut inlet x 1/2" BSP conical nut outlet models: PVC hose: HC11 50~250cm Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment Stainless Steel Double lock hose HXXXXX 50~250cm 1st X stands for materials of inner tube: A=PVC B=EPDM P=PEX 2nd X stands for inner diameter: 7=DN7 10=DN10 3rd X stands for materials of outer tube: 1=SUS201 2=SUS202 3=SUS304 4th X and 5th X stands for colour of surface treatment: 01=electrolysis 02=chrome plated 03=matt black 04=ORB 05=green bronze 06=antique brass 07=golden 08=karat gold 09=rose gold 10=red bronze 11=drawing nickel

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Manufacturer:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

3rd and 4th Floors, No.18-10, Xiafei Road Xiamen

Postcode

361026

Country

China

General Email

yonghuacheng@wdiplumbing.com

View All Listings by this Company

Manufacturer:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

3rd and 4th Floors, No.18-10, Xiafei Road Xiamen

Postcode

361026

Country

China

General Email

yonghuacheng@wdiplumbing.com

View All Listings by this Company

Range of stainless steel braided, EPDM lined flexible hose assemblies with various brass end connections. The hoses are supplied with EPDM O-rings or washers. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2305002

Size:

See Models.

Marking:

Jetom, WRAS, Year of Manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

H5MAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5MAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1, 30~200cm H5MAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1, 30~200cm H5MAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1,30~200cm H5MAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5MAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5MAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5MAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1, 30~200cm H5MAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm H5MAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm H5MAU-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm H5NAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5NAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1, 30~200cm H5NAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1,30~200cm H5NAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1, 30~200cm H5NAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5NAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5NAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5NAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1,30~200cm H5NAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm H5NAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm H5NAU-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm H5PAJ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 3/8” BSP (F), 30~200cm H5PAK-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M8*1,30~200cm H5PAL-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M10*1, 30~200cm H5PAM-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M12*1, 30~200cm H5PAN-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * M15*1, 30~200cm H5PAP-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 3/8” BSP (F) * 1/2” BSP (F), 30~200cm H5PAQ-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * 1/2” BSP (F), 30~200cm H5PAR-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M8*1, 30~200cm. H5PAS-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M10*1, 30~200cm. H5PAT-XXX101C-1 Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M12*1, 30~200cm. H5PAU-XXX101C-1Stainless steel braided flexible hose EPDM inner hose, 1/2” BSP (F) * M15*1, 30~200cm. XXX denotes the length of the hose (30cm to 200cm). For examples: 50cm = 050 100cm = 100 150cm = 150

Approval Holder:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306017

Size:

Please refer to model.

Marking:

Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

UKWR denotes the customer code and is replaced with XX. L denotes the length of the hose (between 50mm & 4,000mm) and is replaced with L50 to L4000. DG10E-UKWR-001-L (15mm compression x M10) - Bore size DN8. DG10E-UKWR-002-L (15mm compression x M12) - Bore size DN8. DG10E-UKWR-003-L (10mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-004-L (15mm compression x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-005-L (F ½" BSP X F ½" BSP) - Bore size DN10. DG10E-UKWR-006-L (15mm compression iso valve x F ½"BSP) - Bore size DN10. DG10E-UKWR-007-L (15mm push fit iso valve x 15mm push fit) - Bore size DN10. DG10E-UKWR-008-L (22mm compression iso valve x F ¾" BSP) - Bore size DN13. DG10E-UKWR-009-L (22mm x F ¾" BSP) - Bore size DN13. DG10E-UKWR-011-L (15mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-012-L (15mm compression x F ½" BSP) - Bore size DN10. DG10E-UKWR-013-L (15mm compression x 10mm compression) - Bore size DN10. DG10E-UKWR-015-L (15mm compression x 15mm compression) - Bore size DN10. DG10E-UKWR-014-L (15mm compression x F ¾" BSP) - Bore size DN10. DG10E-UKWR-016-L (15mm compression x 22mm compression) - Bore size DN10. DG10E-UKWR-017-L (F ½” BSP x 22mm compression) - Bore size DN10. DG10E-UKWR-018-L (15mm compression iso valve x F ¾" BSP) - Bore size DN10. DG10E-UKWR-019-L (15mm push fit x M10) - Bore size DN10. DG10E-UKWR-020-L (15mm push-fit x M12) - Bore size DN10. DG10E-UKWR-021-L (15mm push-fit x F ¾" BSP) - Bore size DN10. DG10E-UKWR-022-L (15mm push fit x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-023-L (15mm push-fit x 15mm compression) - Bore size DN10. DG10E-UKWR-024-L (15mm push-fit x 15mm push fit) - Bore size DN10. DG10E-UKWR-025-L (F ¾" BSP x F ¾" BSP) - Bore size DN13. DG10E-UKWR-026-L (22mm compression x 22mm compression) - Bore size DN13. DG10E-UKWR-029-L (F ½” x M10) - Bore size DN8. DG10E-UKWR-030-L (F ⅜” x M10) - Bore size DN8. DG10E-UKWR-031-L (15mm compression iso valve x 15mm compression) - Bore size DN10. DG10E-WRAS-034-L (F3/4” x F3/4” elbow) - Bore size DN10. DG10E-QY-007-L (F ⅜” x F⅜”) - Bore size DN8. DG10E-QY-008-L (F⅜” x F⅜” elbow) - Bore size DN8. DG10E-834-001-L (F⅜" X F¼") - Bore size DN8. DG10E-UKWR-032-L (F½" x M½") - Bore size DN13, DG10E-UKWR-033-L (15mm x M½") - Bore size DN13, DG10E-UKWR-035-L (F¾" x M¾") - Bore size DN13 & DG10E-UKWR-036-L (F½" x F½" Elbow) - Bore size DN10. DG10E-WRAS-038-L (F½" x M½") - Bore size DN8 DG10E-XC-002-L (F½" BSP X F½" BSP) - Bore size DN8 DG10E-A007010-028-L(F1/2”X15mm compression iso valve)-Bore size DN13 DG10E-EWT-003-L(F1/2”XF1/2”)-Bore size DN13 DG10E-A007010-027-L(F1/2”X15mm)-Bore size DN13 DG10E-A007119-019-L(22mm X 22mm with iso valve)-Bore size DN13 DG10E-A007010-037-L(15mm X 15mm)-Bore size DN13 DG10E-A007010-013-L(15mm X M12x1 Short)-Bore size DN10 DG10E-SCS-001-L(F1/2”X14.7mm with iso valve) - Bore size DN10 DG10E-SCS-002-L(F3/4”X21mm with iso valve)-Bore size DN13 DG10E-A007010-014-L(15mm X M12x1 Long)-Bore size DN10 DG10E-TECH-001-L (F1/2"XM12)-Bore size DN8.

Approval Holder:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103345

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

MSL, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

BFFTCW-1510 BFFTCW-1510500 BFFTCW-1512 BFFTCW-1512500 BFFTCW-10D500 BFFTCW-10D900 BFFTCW-12D500 BFFTCW-12D900 BFFTCW-DD500 BFFTCW-DD900 BFFTCWIV-10D300 BFFTCWIV-12D300 BFFTCW-1515300 BFFTCW-1515500 BFFTCW-1515900 BFFTCW-15D300 BFFTCW-15D500 BFFTCW-15D900 BFFTCW-15E300 BFFTCW-15E500 BFFTCW-15E900 BFFTCW-2222300 BFFTCW-2222500 BFFTCW-22E300 BFFTCW-22E500 BFFTCW-22E900 BFFTCWIV-15D150 BFFTCWIV-15D300 BFFTCWIV-15D500 BFFTCWIV-15E300 BFFTCWIV-15E500 BFFTCWIV-22E30

Approval Holder:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306071

Size:

Please refer to model.

Marking:

Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

C54400 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ½" BSP C54401 *CB WRAS 30CM FLEX TAP CONNS 15mm X F ¾" BSP C54402 *CB WRAS 30CM FLEX TAP CONNS 22mm X F ¾" BSP C54403 *CB WRAS 50CM FLEX TAP CONNS 15mm X F ½" BSP C54404 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ½"BSP C54405 *CB WRAS ISO FLEX TAP CONS 15mm iso valve x F ¾" BSP C54406 *CB WRAS ISO FLEX TAP CONS 22mm iso valve x F ¾" BSP C54412 *CB WRAS M10 MONO FLEX TAP CONNS 15mm x M10 C54413 *CB WRAS M12 MONO FLEX TAP CONNS 15mm x M12 C54414 *CB WRAS 30CM FLEX TAP CONNS 15mm x 15mm

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

General Email

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

General Email

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2306072

Size:

Please refer to model.

Marking:

FLOMASTA (Brand of Kingfisher), WRAS and date of manufacture (YYYY) on crimped sleeve. Models added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on crimped sleeve.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

05272204 (15mm compression x M10) - Bore size DN8. 05272198 (15mm compression x M12) - Bore size DN8. 05272310 (F ½" BSP X F ½" BSP) - Bore size DN10. 05272174(15mm compression iso valve x F ½"BSP) - Bore size DN10. 5052931708345 (22mm compression iso valve x F ¾" BSP) - Bore size DN13. 05272150, 05272167 (22mm x F ¾" BSP) - Bore size DN13. 05272181 (15mm compression x F ⅜" BSP) - Bore size DN10. 05272228 (15mm compression x F ½" BSP) - Bore size DN10. 05272402 (15mm compression x 10mm compression) - Bore size DN10. 05272242 (15mm compression x 15mm compression) - Bore size DN10. 05272327 (15mm compression x F ¾" BSP) - Bore size DN10. 05272280 (15mm compression x 22mm compression) - Bore size DN10. 5052931708352 (15mm compression iso valve x F ¾" BSP) - Bore size DN10. Models Added December 2023: 05272334, 05272372, 05272396 (22mmxF3/4" BSP)-Bore size DN13. 5052931675531,, 05272303, 05272358, 05272389, 5052931675548 (15mm compression xF½"BSP)- Bore size DN10. 05272365 (15mm compressionxF"BSP) Bore size DN10. 5052931462629, 05272273, 05272341(15mm compressionx15mm compression)- Bore size DN10. 05280469 (F ½"BSPXF½"BSP)-Bore size DN10. 05272266 (15mm compression iso valve xF½"BSP)- Bore size DN10.

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company