Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009023

Size:

12mm push fit X barbed crimp connection 15mm push fit X barbed crimp connection 22mm push fit X barbed crimp connection

Marking:

CDC and size on collet

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

HCBB 1210 (12mm) HCBB 15-1/2 (15mm) HCBB 22-1/2 (15mm) HCBB 22-3/4 (15mm)

Approval Holder:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

Manufacturer:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

“Plimat ABS Fittings BS Inch and ABS Adaptor Fittings” range of ABS solvent cement or threaded fittings for use with “Plimat ABS pipe”. Maximum working pressure: 15.0 bar (fittings with ½” - 4” solvent cement connections), 9.0 bar (fittings with 5” or 6” solvent cement connections, with or without threaded connecitons), and 10.0 bar (fittings with threaded connections and ½” - 4” solvent cement connections). Cold water and above ground use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009338

Size:

See model

Marking:

Plimat, size and material on shoulder of fitting. Plimate, size, ABS class, pressure rating, BS5391 and line no. on pipe.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Elbow 90° Plain Inch: ½” ABSGOP0200, ¾” ABSGOP0250, 1” ABSGOP0320, 1¼” ABSGOP0400, 1½” ABSGOP0500, 2” ABSGOP0630, 2½” ABSGOP0750, 3” ABSGOP0900, 4” ABSGOP1100, 5” ABSGOP1400, 6” ABSGOP1600. Elbow 45° Plain Inch: ½” ABSGYP0200, ¾” ABSGYP0250, 1” ABSGYP0320, 1¼” ABSGYP0400, 1½” ABSGYP0500, 2” ABSGYP0630, 2½” ABSGYP0750, 3” ABSGYP0900, 4” ABSGYP1100, 5” ABSGYP1400, 6” ABSGYP1600. Socket Plain Inch: ½” ABSMAP0200, ¾” ABSMAP0250, 1” ABSMAP0320, 1¼” ABSMAP0400, 1½” ABSMAP0500, 2” ABSMAP0630, 2½” ABSMAP0750, 3” ABSMAP0900, 4” ABSMAP1100, 5” ABSMAP1400, 6” ABSMAP1600. Tee Plain Inch: ½” ABSTIP0200, ¾” ABSTIP0250, 1” ABSTIP0320, 1¼” ABSTIP0400, 1½” ABSTIP0500, 2” ABSTIP0630, 2½” ABSTIP0750, 3” ABSTIP0900, 4” ABSTIP1100, 5” ABSTIP1400, 6” ABSTIP1600. Cap Plain Inch: ½” ABSCAP0200, ¾” ABSCAP0250, 1” ABSCAP0320, 1¼” ABSCAP0400, 1½” ABSCAP0500, 2” ABSCAP0630, 2½” ABSCAP0750, 3” ABSCAP0900, 4” ABSCAP1100, 6” ABSCAP1600. Bend 90° Plain Inch: ½” ABSCUP0200, ¾” ABSCUP0250, 1” ABSCUP0320, 1¼” ABSCUP0400, 1½” ABSCUP0500, 2” ABSCUP0630, 2½” ABSCUP0750, 3” ABSCUP0900, 4” ABSCUP1100. Union Plain Inch: ½” ABSBOP0200, ¾” ABSBOP0250, 1” ABSBOP0320, 1¼” ABSBOP0400, 1½” ABSBOP0500, 2” ABSBOP0630, 2½” ABSBOP0750, 3” ABSBOP0900, 4” ABSBOP1100. Reducer Plain Inch: ¾” x ½” ABSRCP025B, 1” x ½” ABSRCP032B, 1” x ¾” ABSRCP032C, 1¼” x 1” ABSRCP040D, 1½” x ¾” ABSRCP050C, 1½” x 1” ABSRCP050D, 1½” x 1¼” ABSRCP050E, 2” x 1” ABSRCP063D, 2” x 1¼” ABSRCP063E, 2” x 1½” ABSRCP063F, 2½” x 1½” ABSRCP075F, 2½” x 2” ABSRCP075G, 3” x 1½” ABSRCP090F, 3” x 2” ABSRCP090G, 3” x 2½” ABSRCP090H, 4” x 2” ABSRCP110G, 4” x 3” ABSRCP110I, 5” x 4” ABSRCP140L, 6” x 4” ABSRCP160L. Stub Flange Plain Inch: 1” ABSQRP0320, 1¼” ABSQRP0400, 1½” ABSQRP0500, 2” ABSQRP0630, 2½” ABSQRP0750, 3” ABSQRP0900, 4” ABSQRP1100, 5” ABSQRP1400, 6” ABSQRP1600. Full Faced Flange Plain Inch: ½” ABSFNP0200, ¾” ABSFNP0250, 1” ABSFNP0320, 1¼” ABSFNP0400, 1½” ABSFNP0500, 2” ABSFNP0630, 2½” ABSFNP0750, 3” ABSFNP0900, 4” ABSFNP1100. Blanking Flange Plain Inch: ½” ABSFCP0200, ¾” ABSFCP0250, 1” ABSFCP0320, 1¼” ABSFCP0400, 1½” ABSFCP0500, 2” ABSFCP0630, 2½” ABSFCP0750, 3” ABSFCP0900, 4” ABSFCP1100, 6” ABSFCP1600. Elbow 90° Plain - Female Threaded BSP: ½” ABSGOC0200, ¾” ABSGOC0250, 1” ABSGOC0320, 1¼” ABSGOC0400, 1½” ABSGOC0500, 2” ABSGOC0630, 3” ABSGOC0900. Tee Plain - Female Threaded BSP: ½” ABSTIC0200, ¾” ABSTIC0250, 1” ABSTIC0320, 1¼” ABSTIC0400, 1½” ABSTIC0500, 2” ABSTIC0630, 3” ABSTIC0900. Socket Plain - Female Threaded BSP: ½” ABSMAC0200, ¾” ABSMAC0250, 1” ABSMAC0320, 1¼” ABSMAC0400, 1½” ABSMAC0500, 2” ABSMAC0630, 3” ABSMAC0900, 4” ABSMAC1100. Socket Plain - Male Threaded BSP: ½” ABSAMC0200, ¾” ABSAMC0250, 1” ABSAMC0320, 1¼” ABSAMC0400, 1½” ABSAMC0500, 2” ABSAMC0630, 3” ABSAMC0900, 4” ABSAMC1100. Male Spigot Plain - Female Threaded BSP: ½” ABSAFC0200, ¾” ABSAFC0250, 1” ABSAFC0320, 1¼” ABSAFC0400, 1½” ABSAFC0500, 2” ABSAFC0630. Reducing Bush Plain Male - Female Threaded BSP: ½” x ⅜” ABSRCC020A, ¾” x ½” ABSRCC025B, 1” x ¾” ABSRCC032C. Composite Union Plain Female - Female Brass Threaded BSP: ½” ABSBFC0200, ¾” ABSBFC0250, 1” ABSBFC0320, 1¼” ABSBFC0400, 1½” ABSBFC0500, 2” ABSBFC0630, 2½” ABSBFC0750, 3” ABSBFC0900. Composite Union Plain Female - Male Brass Threaded BSP: ½” ABSBMC0200, ¾” ABSBMC0250, 1” ABSBMC0320, 1¼” ABSBMC0400, 1½” ABSBMC0500, 2” ABSBMC0630, 2½” ABSBMC0750, 3” ABSBMC0900. Tank Connector Plain - Male Threaded BSP: ½” ABSTCC0200, ¾” ABSTCC0250, 1” ABSTCC0320, 1¼” ABSTCC0400, 1½” ABSTCC0500, 2” ABSTCC0630, 2½” ABSTCC0750, 3” ABSTCC0900, 4” ABSTCC1100. Barrel Nipple Plain - Male Threaded BSP: ⅜” ABSBNC0160, ½” ABSBNC0200, ¾” ABSBNC0250, 1” ABSBNC0320, 1¼” ABSBNC0400, 1½” ABSBNC0500, 2” ABSBNC0630, 2½” ABSBNC0750, 3” ABSBNC0900, 4” ABSBNC1100. Barrel Nipple Threaded BSP: ½” ABSBAF0200, ¾” ABSBAF0250, 1” ABSBAF0320, 1¼” ABSBAF0400, 1½” ABSBAF0500, 2” ABSBAF0630, 2½” ABSBAF0750, 3” ABSBAF0900, 4” ABSBAF1100. Back Nuts Threaded BSP: ½” ABSNUF0200, ¾” ABSNUF0250, 1” ABSNUF0320, 1¼” ABSNUF0400, 1½” ABSNUF0500, 2” ABSNUF0630, 2½” ABSNUF0750, 3” ABSNUF0900, 4” ABSNUF1100. Pipe 9 bar: 1” ABSCLC0320, 1¼” ABSCLC0400, 1½” ABSCLC0500, 2” ABSCLC0630, 2½” ABSCLC0750, 3” ABSCLC0900, 4” ABSCLC1100, 6” ABSCLC1600. Pipe 15 Bar: ½” ABSCLE0200, ¾” ABSCLE0250, 1” ABSCLE0320, 1¼” ABSCLE0400, 1½” ABSCLE0500, 2” ABSCLE0630, 3” ABSCLE0900, 4” ABSCLE1100.

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010316

Size:

See model.

Marking:

Conex logo >B< on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa SL

Company Name

IBP Atcosa SL

Address

General Email

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Product Images

Approval Holder:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101004

Size:

20mm & 25mm

Marking:

PN, JG and size on body

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101045

Marking:

PN, JG & size on protective cap.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with EN ISO 21003 pipe. Maximum working pressure 10.0 bar. For cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012038

Size:

Please refer to model.

Marking:

RIFENG & Crimp Profiles (U-TH-H) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Equal Straight Union: F17-S1216x1216, F17-S1620x1620 F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union: F17-S1620x1216 F17-S2025x1216 F17-S2025x1620 F17-S2026x1216 F17-S2026x1620 F17-S2632x1216 F17-S2632x1620 F17-S2632x2025 F17-S2632x2026 Male Straight Union: F17-S1216x3/8 F17-S1216x1/2 F17-S1216x3/4 F17-S1620x1/2 F17-S1620x3/4 F17-S1620x1 F17-S2025x3/4 F17-S2025x1 F17-S2026x3/4 F17-S2026x1 F17-S2632x1 Female Straight Union: F17-S1216x3/8F F17-S1216x1/2F F17-S1216x3/4F F17-S1620x1/2F F17-S1620x3/4F F17-S1620x1F F17-S2025x3/4F F17-S2025x1F F17-S2026x3/4F F17-S2026x1F F17-S2632x1F Equal Elbows: F17-L1216x1216 F17-L1620x1620 F17-L2025x2025 F17-L2026x2026 F17-L2632x2632 Unequal Elbows: F17-L1620*1216 F17-L2025*1216 F17-L2025*1620 F17-L2632*2025 Male Elbows: F17-L1216x3/8 F17-L1216x1/2 F17-L1216x3/4 F17-L1620x1/2 F17-L1620x3/4 F17-L1620x1 F17-L2025x3/4 F17-L2025x1 F17-L2026x3/4 F17-L2026x1 F17-L2632x1 Female Elbows: F17-L1216x3/8F F17-L1216x1/2F F17-L1216x3/4F F17-L1620x1/2F F17-L1620x3/4F F17-L2025x3/4F F17-L2026x3/4F F17-L2025x1F F17-L2632x1F Equal Tees: F17-T1216x1216x1216 F17-T1620x1620x1620 F17-T2025x2025x2025 F17-T2026x2026x2026 F17-T2632x2632x2632 Unequal Tees: F17-T1216x1620x1216 F17-T1216x2025x1216 F17-T1620x1216x1216 F17-T2025x1216x1216 F17-T2026x1216x1216 F17-T2026x1216x1620 F17-T1620x1216x1620 F17-T1620x1620x1216 F17-T1620x2025x1620 F17-T1620x2026x1620 F17-T2025x1216x2025 F17-T2025x1620x1620 F17-T2025x2025x1620 F17-T2025x1620x2025 F17-T2026x1216x2026 F17-T2026x1620x1620 F17-T2026x1620x2026 F17-T2026x2026x1620 F17-T2632x1216x2632 F17-T2632x1620x2632 F17-T2632x2026x2026 F17-T2632x2025x2632 F17-T2632x2026x2632 Female Tee: F17-T1216x3/8Fx1216 F17-T1216x1/2Fx1216 F17-T1620x1/2Fx1620 F17-T1620x3/4Fx1620 F17-T2025x1/2Fx2025 F17-T2025x3/4Fx2025 F17-T2026x1/2Fx2026 F17-T2026x3/4Fx2026 F17-T2632x3/4Fx2632 F17-T2632x1Fx2632 Male tee: F17-T1216x3/8x1216 F17-T1216x1/2x1216 F17-T1620x1/2x1620 F17-T1620x3/4x1620 F17-T2025x1/2x2025 F17-T2025x3/4x2025 Wall-plated female elbow: F17-L1216x3/8F (Z) F17-L1216x1/2F (Z) F17-L1620x1/2F (Z) F17-L1620x3/4F (Z) F17-L2025x3/4F (Z) F17-L2026x3/4F (Z) Demountable female straight union: F17-S1216x3/8F (H) F17-S1216x1/2F (H) F17-S1216x3/4F (H) F17-S1620x1/2F (H) F17-S1620x3/4F (H) F17-S2025x3/4F (H) F17-S2026x3/4F (H) F17-S2632x1F (H) End cap: F17-D1216 F17-D1620 F17-D2025 F17-D2026 F17-D2632

Product Images

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Manufacturer:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Range of crimp fittings with a bronze body incorporating EPDM O-rings. For use with copper pipe manufactured to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106010

Size:

See model.

Marking:

Conex Universal Limited logo: >B<, WRAS and size on fitting body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

HZ Valve adaptor: HZC625101: 15mm crimp joint X ½” BSP (M). HZC625102: 22mm crimp joint X ¾” BSP (M). HZC625103: 28mm crimp joint X 1” BSP (M). HZC625104: 35mm crimp joint X 1 ¼” BSP (M). HZC625105: 42mm crimp joint X 1 ½” BSP (M). HZC625106: 54mm crimp joint X 2” BSP (M).

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Instalfittings sp ZOO

Company Name

IBP Instalfittings sp ZOO

Address

General Email

View All Listings by this Company

Range of SUS316L & SUS304 stainless steel press fittings for use with stainless steel pipe manufactured to EN 10312. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107090

Size:

15mm - 108mm press-fit connections. ½” BSP (F) to 2” BSP (F). ½” BSP (M) to 2” BSP (M).

Marking:

SUMWIN, EN10312 and DN on body

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Straight coupling (press fit) 4111111O, 1111111O, 4111221O, 1111221O, 4111331O, 1111331O, 4111441O, 1111441O, 4111551O, 1111551O, 4111661O, 1111661O, 4111881O, 1111881O, 4111991O, 1111991O, 4111AA1O, 1111AA1O. Reducing coupling (press fit) 4111211O, 1111211O, 4111321O, 1111321O, 4111431O, 1111431O, 4111541O, 1111541O, 4111651O, 1111651O, 4111861O, 1111861O, 4111961O, 1111961O, 4111981O, 1111981O, 4111A81O, 1111A81O, 4111A91O, 1111A91O. Female thread straight coupling (Press fit x BSP (F)) 4113111O, 1113111O, 4113221O, 1113221O, 4113331O, 1113331O, 4113441O, 1113441O, 4113551O, 1113551O, 4113661O, 1113661O, 4113211O, 1113211O, 4113321O, 1113321O, 4113431O, 1113431O, 4113541O, 1113541O, 4113651O, 1113651O. Male thread straight coupling (Press fit x BSP (M)) 4112111O, 1112111O, 4112221O, 1112221O, 4112331O, 1112331O, 4112211O, 1112211O, 4112321O, 1112321O, 4112441O, 1112441O, 4112551O, 1112551O, 4112661O, 1112661O, 4112541O, 1112541O, 4112651O, 1112651O. Flange coupling (Press fit) 41I4111O, 11I4111O, 41I4221O, 11I4221O, 41I4331O, 11I4331O, 41I4441O, 11I4441O, 41I4551O, 11I4551O, 41I4661O, 11I4661O, 41I4881O, 11I4881O, 41I4991O, 11I4991O, 41I4AA1O, 11I4AA1O. 90° elbow (Press fit) 4121111O, 1121111O, 4121221O, 1121221O, 4121331O, 1121331O, 4121441O, 1121441O, 4121551O, 1121551O, 4121661O, 1121661O, 4121881O, 1121881O, 4121991O, 1121991O, 4121AA1O, 1121AA1O. 90° ER reducing elbow (Press fit) 4121211O, 1121211O, 4121321O, 1121321O, 4121431O, 1121431O, 4121541O, 1121541O, 4121651O, 1121651O. 90° ED one-way elbow (Press fit) 4120111O, 1120111O, 4120221O, 1120221O, 4120331O, 1120331O, 4120441O, 1120441O, 4120551O, 1120551O, 4120661O, 1120661O. 90° EFZ Female thread short Elbow (Press fit x BSP (F)) 4124111O, 1124111O, 4124221O, 1124221O, 4124331O, 1124331O, 4124211O, 1124211O, 4124321O, 1124321O. 90° EF Female thread Elbow (Press fit x BSP (F)) 4123111O, 1123111O, 4123221O, 1123221O, 4123331O, 1123331O, 4123441O, 1123441O, 4123551O, 1123551O, 4123661O, 1123661O, 4123211O, 1123211O, 4123321O, 1123321O, 4123431O, 1123431O, 4123541O, 1123541O, 4123651O, 1123651O. EM Male thread Elbow (Press fit x BSP (M)) 4122111O, 1122111O, 4122221O, 1122221O, 4122331O, 1122331O, 4122441O, 1122441O, 4122551O, 1122551O, 4122661O, 1122661O, 4122211O, 1122211O, 4122321O, 1122321O, 4122431O, 1122431O, 4122541O, 1122541O, 4122651O, 1122651O. 45° Elbow (Press fit) 4141111O, 1141111O, 4141221O, 1141221O, 4141331O, 1141331O, 4141441O, 1141441O, 4141551O, 1141551O, 4141661O, 1141661O, 4141881O, 1141881O, 4141991O, 1141991O, 4141AA1O, 1141AA1O. 45° ED one-way Elbow (Press fit) 4140111O, 1140111O, 4140221O, 1140221O, 4140331O, 1140331O, 4140441O, 1140441O, 4140551O, 1140551O, 4140661O, 1140661O. Equal tee (Press fit) 4131111O, 1131111O, 4131221O, 1131221O, 4131331O, 1131331O, 4131441O, 1131441O, 4131551O, 1131551O, 4131661O, 1131661O, 4131881O, 1131881O, 4131991O, 1131991O, 4131AA1O, 1131AA1O. Reducing tee (Press fit) 4131211O, 1131211O, 4131311O, 1131311O, 4131321O, 1131321O, 4131431O, 1131431O, 4131541O, 1131541O, 4131651O, 1131651O, 4131861O, 1131861O, 4131961O, 1131961O, 4131981O, 1131981O, 4131A81O, 1131A81O, 4131A91O, 1131A91O. Female thread Tee (Press fit x BSP (F)) 4133111O, 1133111O, 4133221O, 1133221O, 4133331O, 1133331O, 4133441O, 1133441O, 4133551O, 1133551O, 4133661O, 1133661O, 4133211O, 1133211O, 4133321O, 1133321O, 4133431O, 1133431O, 4133541O, 1133541O, 4133651O, 1133651O. Male thread Tee (Press fit x BSP (M)) 4132111O, 1132111O, 4132221O, 1132221O, 4132331O, 1132331O, 4132441O, 1132441O, 4132551O, 1132551O, 4132661O, 1132661O, 4132211O, 1132211O, 4132321O, 1132321O, 4132431O, 1132431O, 4132541O, 1132541O, 4132651O, 1132651O. Adjustable straight (Press fit) 4116111O, 1116111O, 4116221O, 1116221O, 4116331O, 1116331O, 4116441O, 1116441O, 4116551O, 1116551O, 4116661O, 1116661O, 4116881O, 1116881O, 4116991O, 1116991O, 4116AA1O, 1116AA1O. Hex adaptor (BSP (F) 411L111O, 111L111O, 411L221O, 111L221O, 411L331O, 111L331O, 411L441O, 111L441O, 411L551O, 111L551O, 411L661O, 111L661O. Bridge (Press fit) 411Q111O, 111Q111O, 411Q221O, 111Q221O, 411Q331O, 111Q331O. Cap (Press fit) 4115111O, 1115111O, 4115221O, 1115221O, 4115331O, 1115331O, 4115441O, 1115441O, 4115551O, 1115551O, 4115661O, 1115661O.

Product Images

Approval Holder:

Guangdong Sumwin New Material Group Co., Ltd.

Company Name

Guangdong Sumwin New Material Group Co., Ltd.

Address

Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong

Country

China

View All Listings by this Company

Manufacturer:

Guangdong Sumwin New Material Group Co., Ltd.

Company Name

Guangdong Sumwin New Material Group Co., Ltd.

Address

Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong

Country

China

View All Listings by this Company

Range of press fit fittings incorporating copper (GP5 models) or bronze (GP4 models) bodies and EPDM `O`-rings, for use with copper tube to EN 1057. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106017

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

GP5002 Bend 90: 12 - 54mm. GP5001 Bend 90 i/a: 12 - 54mm. GP5041 Bend 45: 12 - 54mm. GP5040 Bend 45 i/a: 12 - 54mm. GP5270 Straight Coupling: 12 - 54mm. GP5271 Straight Coupling: 12 - 54mm. GP5270S Sleeve Coupling: 12 - 54mm. GP5240 Reducing Coupling: 12 - 54mm. GP5243 Fitting Reducer: 12 - 54mm. GP5130 Equal Tee: 12 - 54mm. GP5301 Cap End: 12 - 54mm. GP5130 Reducing Tee: 12 - 54mm. GP5085 Full Crossover: 15 - 22mm. GP5086 Part Crossover: 15 - 22mm. GP4090 Elbow 90 Female: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4471 Wallplate Elbow: 15mm x 1/2” BSP (M) - 22mm x 3/4” BSP (M) GP4092 Elbow 90 Male: 15mm x 1/2” BSP (M) - 54mm x 2” BSP (M). GP4355 Tap Connector: 15mm x 1/2” BSP Captive Nut - 28mm x 1 1/4” BSP Captive Nut. GP4270 Female Adaptor: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4243 Male Adaptor: 15mm x 1/2” BSP (M) - 54mm (Crimp Joint) x 2” BSP (M). GP4130 Threaded Tee: 15mm x 1/2” BSP (M) x 15mm - 54mm x 1/2” BSP (M) x 54mm. GP4331 Straight Union: 15mm x 1/2” BSP (M) - 28mm x 1” BSP (M). GP4281 Female Adaptor: 15mm x 1/2” BSP (F) - 22mm x 3/4” BSP (F).

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111701

Note:

For above and below ground use

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm

Marking:

Unidelta, pressure rating & size on the compression nut

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106009

Size:

12mm - 108mm.

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

6270 & 6270CP Copper Press Coupling: 12 - 108mm. 6271 & 6271CP Copper Press Coupling: 12 - 54mm. 6240 & 6240CP Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 & 6243CP Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001& 6001CP Bend 90° x press: 12-108mm. 6002 & 6002CP Bend 90° press x press: 12 - 108mm. 6130 & 6130CP Equal Tee 3 x press: 12 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. 6041& 6041CP Bend 45° press x press: 12 - 108mm. 6301 & 6301CP Endcap press: 12 - 108mm. 6131 & 6131CP Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110321

Size:

See model.

Marking:

Hailiang and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

EKYH0000, STRAIGHT COUPLING WITH GROOVE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, REDUCING COUPLING CXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, FITTING REDUCER FXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, COPPER FEMALE ADAPTOR: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, COPPER MALE ADAPTOR: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, EXTENDED SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, REDUCER ELBOW: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, CROSSOVER CXC:15mm, 22mm, 28mm EKYH0167, PART CROSSOVER FTGXC: 15mm, 22mm, 28mm EKYH0201, EQUAL TEE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, REDUCING TEE: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, CAP CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added September 2023: EKYH0001 STRAIGHT COUPLING WITH DOT CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. EKYH0202 REDUCING TEE: 35mm*22mm*22mm, 35mm*22mm*35mm, 35mm*28mm*35mm, 35mm*28mm*22mm, 35mm*28mm*35mm, 42mm*35mm*35mm. EKYH0005 COPPER FEMALE ADAPTOR: 15mm*3/4", 22mm*1/2", 22mm*1", 28mm*3/4", 35mm*1". EKYH0006 COPPER MALE ADAPTOR: 22mm*1/2", 28mm*3/4", 35mm*1". Models added in July 2024: EKYH0001 STRAIGHT COUPLING WITH DOT CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0002 SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0012 EXTENDED SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0003 REDUCING COUPLING CXC 66.7mmX22mm 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0004 FITTING REDUCER FXC 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0100 90DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0101 90DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0130 45DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0131 45DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0301 CAP CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0201 EQUAL TEE CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0202 REDUCING TEE 66.7mmX66.7mmX22mm 66.7mmX66.7mmX28mm 66.7mmX66.7mmX35mm 66.7mmX66.7mmX42mm 66.7mmX66.7mmX54mm 76.1mmX76.1mmX22mm 76.1mmX76.1mmX28mm 76.1mmX76.1mmX35mm 76.1mmX76.1mmX42mm 76.1mmX76.1mmX54mm 76.1mmX76.1mmX66.7mm 88.9mmX88.9mmX22mm 88.9mmX88.9mmX28mm 88.9mmX88.9mmX35mm 88.9mmX88.9mmX42mm 88.9mmX88.9mmX54mm 88.9mmX88.9mmX66.7mm 88.9mmX88.9mmX76.1mm 108mmX108mmX22mm 108mmX108mmX28mm 108mmX108mmX35mm 108mmX108mmX42mm 108mmX108mmX54mm 108mmX108mmX66.7mm 108mmX108mmX76.1mm 108mmX108mmX88.9mm EKYH0005 COPPER FEMALE ADAPTOR 66.7mmX2 1/2" BSPP 76.1mmX2 1/2" BSPP 76.1mmX3" BSPP 88.9mmX3" BSPP 108mmX4" BSPP EKYH0006 COPPER MALE ADAPTOR 66.7mmX2 1/2" BSPT 76.1mmX2 1/2" BSPT 76.1mmX3" BSPT 88.9mmX3" BSPT 108mmX4" BSPT EKYH0501 FLANGE 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0705 STRAIGHT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0704 BENT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0703 STRAIGHT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0702 BENT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0000 STRAIGHT COUPLING WITH GROOVE CXC 66.7mm, 76.1mm, 88.9mm, 108mm

Product Images

Approval Holder:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of press-fit end connectors (gunmetal bodies) for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112039

Size:

15mm – 54mm compression.

Marking:

Pegler Yorkshire, size and xpress on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

‘X press’ range comprising of models: 04305131. 04305132. 04305133. 04305141. 04305146. 04305151. 04305161.

Product Images

Approval Holder:

Pegler Yorkshire Ltd

Company Name

Pegler Yorkshire Ltd

Address

St Catherines Avenue, Balby Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+44 (0) 844 243 4400

View All Listings by this Company

Range of brass tee fittings for use with copper pipe to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112337

Size:

See model

Marking:

Aquamatic Products Limited logo (APL) on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

B840-1 - 15mm compression x 15mm spigot x 15mm spigot. B841-1 - 22mm compression x 22mm spigot x 22mm spigot.

Product Images

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

‘HE-705X & HE-715X’ ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). HE-7052/7053/7058/7059 & HE-7152/7153/7158/7159 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2109058

Size:

See model

Marking:

HONGEN, WRAS and size on crimp connection.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M-type connection: HE-7050 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7051 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7052 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7053 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7054 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7055 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7056 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7057 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7058 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7059 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”. V-type connection: HE-7150 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7151 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7152 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7153 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7154 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7155 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7156 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7157 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7158 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7159 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”.

Product Images

Approval Holder:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

Manufacturer:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106049

Size:

12mm - 108mm.

Marking:

DVGW, XPRESS & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201016

Note:

This approval does not include solvent cement.

Size:

See model.

Marking:

ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)

Product Images

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Pexal range of brass press fittings with EPDM ‘O’-rings for use with copper pipe EN1057. Model VS0171373 incorporates 90° copper elbow (chrome plated) Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2203337

Size:

16mm, 20mm, 26mm

Marking:

Valsir on fitting body

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

VS0171311 VS0171312 VS0171313 VS0171107UK VS0171119UK VS0171111UK VS0171117UK VS0171005 VS0171021 VS0171025 VS0171051 VS0171373 VS0171205 VS0171105 VS0171115

Product Images

Approval Holder:

Valsir Spa

Company Name

Valsir Spa

Address

MERLARO 2 STREET VESTONE

Postcode

25078

Country

Italy

Phone

+39 365 877011

General Email

valsir@valsir.it

View All Listings by this Company