‘Endex’ range of copper alloy and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2202701

Marking:

Endex (brand of Pegler Yorkshire Ltd.) and size on body

Installation Requirements:

R001

Expiry date:

28/02/2027

Model:

Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of inline and angled screwdriver or lever handle operated spherical valves with (chromium plated) brass bodies, chromium plated brass ball, NBR ‘O’-rings. For use with copper pipe manufactured to EN 1057 Maximum working pressure 16.0 bar at 30°C and 5 bar at 99°C Maximum working pressure 6.0 bar. Maximum operating temperature 90°C (model TX480 only)

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2203009

Size:

see model

Marking:

Model TX480- Tectite Pro & size on body Models 806 & 808 15mm - Flow arrow on body. Prestex, 1254-2, England, BSI Kitemark & size on nut. Model 808 22mm- Pegler logo, size & flow arrow on body. Prestex, 1254-2, England, BSI Kitemark & size on nut. 809- Flow arrow on operating member. Prestex, 1254-2, England, BSI Kitemark & size on nut. Models 809B & 809T - Pegler logo & flow arrow on body. Size & EN1254-2 on nut.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

TX480 - 15mm push fit inlet and outlet (product code 65960) 806 -15mm compression inlet x ½" captive nut (product code 521007) 808 - 15mm compression inlet and outlet (product code 523007) 808 - 22mm compression inlet and outlet (product code 523008) 809 - 15mm compression inlet x ¾" BSP (M) outlet (product code 524008) 809B - 15mm compression inlet x ¾" BSP (M) outlet (product code 524009) 809T - 15mm compression inlets x ¾" BSP (M) outlet (product code 524010)

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

2201074

Size:

DN50 to DN600 flanged

Marking:

Pegler (brand of Aalberts), WRAS, PN and range on data plate on body. PN and DN on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

V905/ V905G LUGGED SERIES & V906/ V906G WAFER SERIES BUTTERFLY VALVES: DN50 - 600

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:

1715 Strainers

Size:

DN50 up DN400 flanged inlet and outlet

Marking:

Pegler (brand of Aalberts) size and pressure on data plate on body. Size, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

V912 Ductile Iron Y Type Strainer DN50-300

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company