‘Inciso’ shower outlet with a chromium plated brass body, incorporating a swivel ball joint connection and supplied with a chromium plated brass wall mounting arm. The product incorporates a plastic flow regulator and an approved single check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.
‘Inciso’ range of wall mounted spout outlets with chromium plated brass bodies, incorporating a plastic aerator. Maximum operating temperature 60°C.
Range of deck mounted, three hole, single outlet (fixed) combination tap assemblies (brass bodies - stainless steel spouts and various outer trims), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The products are also supplied with optional ⅜” to ½” BSP (F) adaptors. The inlet connection to spout outlet incorporates single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top or single lever operating members. The spout outlets vary in length and incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Deck mounted, manually operated blending valve (chromium plated brass), incorporating ceramic cartridge headwork with dome type operating members and a self-cancelling diverter. The product is supplied with various connecting hoses, a handshower and optional ⅜” x ½” captive nut adaptors, intended for installation at each inlet. The handshower outlet connection incorporates an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste and ⅜” BSP (M) x ½” BSP (F) adaptors, intended for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a combined plastic flow regulator and aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of deck mounted three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top or single lever operating members. The spout outlets incorporate a plastic aerator. The tee-piece connector to the spout incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The products are supplied with ⅜” BSP (M) x ½” BSP (F) threaded brass adaptors, intended for installation at each inlet, as well as Stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and spout tee-piece. The product can be supplied with or without a lever operated pop-up waste (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members controlling the cold water. Tap also has a quarter turn ceramic disc headwork using a dome type operating member incorporating a manual override button that is intended to control the flow of a boiling water supply (unit not supplied). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature cold water circuit 60°C Maximum operating temperature hot water circuit 90°C
Range of single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies), incorporating ceramic cartridge headworks, with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and ⅜” BSP (M) x ½” captive nut brass adaptors - intended for installation at the inlets. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
Range of floor mounted single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks, single lever or cross top operating members and self-cancelling diverter to shower outlet. Outlet incorporates an approved single check valve (however the complete assembly has not been tested to demonstrate that it provided adequate backflow protection). The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted (fixed) spout outlets with stainless steel bodies NBR ‘O’-rings and a plastic aerator. Maximum operating temperature 60°C.
Sensor control unit, flow is controlled using a solenoid valve assembly and is activated via infra-red non touch operation. The Art 30622 model has an in-line spherical valve on each inlet, as well as an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection The Art 30629 & 33725 model is supplied with two angled isolation valves and two stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections, which are intended to connect to the tee piece installed prior to the solenoid valve. The tee piece inlets incorporate a combined washer and stainless steel strainer and an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Shower set comprising of a shower handset, hose and holder, having chrome plated brass bodies. The shower handset and holder incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.
Two hole wall mounted concealed shower valve with brass body (model 38473) incorporating a diverter mechanism to two shower outlets and a ceramic cartridge controlling the flow and temperature. To be used with model 44664. Inlets incorporate stainless steel filters and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Shut-off douchette comprising of a shower handset with self-closing trigger, shower hose and wall mounted holder. The inlet elbow of the 47274 model and the inlet to the shower handset of the 20021 model incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of shower handsets and holder outlets consisting of a shower handset, hose and a wall mounted holder and outlet or a shower handset only. The shower handset and wall mounted holder incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar (wall mounted holder). Shower hose and handset is open outlet use only. Maximum operating temperature 60°C.
Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The brass connecting tee between the inlet hoses and supply to the spout outlet is fitted with single check valve assemblies however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The spout outlet incorporates a plastic aerator, ½” connectors and some models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Page 1 of 5
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
