Gessi S.p.A. Approvals


#2001360

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001360
Expiry date:
31/01/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
Art.18601 VIA TORTONA Art.18602 VIA TORTONA
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2003306

Shower set comprising of a shower handset, hose and holder, having chrome plated brass bodies. The shower handset and holder incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2003306
Expiry date:
31/03/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Gessi on rosette
Installation Requirements:
R001 R040
Model:
INCISO 58123
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2003340

Two hole wall mounted concealed shower valve with brass body (model 38473) incorporating a diverter mechanism to two shower outlets and a ceramic cartridge controlling the flow and temperature. To be used with model 44664. Inlets incorporate stainless steel filters and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2003340
Expiry date:
31/03/2025
Size:
½” BSP (F)
Marking:
Gessi on handle
Installation Requirements:
R001 R010 R040
Model:
Concealed part 38473 Parti Incasso for use with exposed part 44664 Via Tortona.
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2004301

Shut-off douchette comprising of a shower handset with self-closing trigger, shower hose and wall mounted holder. The inlet elbow of the 47274 model and the inlet to the shower handset of the 20021 model incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2004301
Expiry date:
30/04/2025
Size:
½” BSP (M)
Marking:
Gessi logo on backplate
Installation Requirements:
R001 R090
Model:
Art. 20021 & 47274.
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2005312

Range of shower handsets and holder outlets consisting of a shower handset, hose and a wall mounted holder and outlet or a shower handset only. The shower handset and wall mounted holder incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar (wall mounted holder). Shower hose and handset is open outlet use only. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2005312
Expiry date:
31/05/2025
Size:
See model
Marking:
Gessi on backplate
Installation Requirements:
R001 R040
Model:
54054 (handset only) – ½” BSP (M) 54023 (handset with holder) – ½” BSP (M)
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2005333

Range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The brass connecting tee between the inlet hoses and supply to the spout outlet is fitted with single check valve assemblies however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The spout outlet incorporates a plastic aerator, ½” connectors and some models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2005333
Expiry date:
31/05/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections
Marking:
Gessi on cover plate.
Installation Requirements:
R001 R009 R010 R040
Model:
58312 - “L” lever – short spout – no waste 58311 - “L” lever – short spout – with waste 58314 - “L” lever – medium spout – no waste 58313 - “L” lever – medium spout – with waste 58316 - “L” lever – high spout – no waste 58315 - “L” lever – high spout – with waste 58322 - “X” lever – short spout – no waste 58321 - “X” lever – short spout – with waste 58324 - “X” lever – medium spout – no waste 58323 - “X” lever – medium spout – with waste 58326 - “X” lever – high spout – no waste 58325 - “X” lever – high spout – with waste
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2007371

Floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet and hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007371
Expiry date:
31/07/2025
Note:
38389 concealed body (built-in part) is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R030
Model:
24970 to be installed in conjunction with 38389 (concealed unit)
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2009319

Bath spout with a brass body (chromium plated). The spout outlet incorporates a plastic aerator. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2009319
Expiry date:
30/09/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Gessi, Emporio on back plate.
Installation Requirements:
R001 R040
Model:
38787
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2009327

Shower hose and handset with sliding rail and inlet kit. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2009327
Expiry date:
30/09/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Gessi logo on handle on hand rail.
Installation Requirements:
R001 R040
Model:
47306
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2010327

Single hole, single outlet (fixed) combination tap assembly incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2010327
Expiry date:
31/10/2025
Size:
Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Gessi logo on operating member.
Installation Requirements:
R001 R006 R010
Model:
18606
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.