Deck mounted, manually operated blending valve (chromium plated brass), incorporating ceramic cartridge headwork with dome type operating members and a self-cancelling diverter. The product is supplied with various connecting hoses, a handshower and optional ⅜” x ½” captive nut adaptors, intended for installation at each inlet. The handshower outlet connection incorporates an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste and ⅜” BSP (M) x ½” BSP (F) adaptors, intended for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass bodies - in various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a combined plastic flow regulator and aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of deck mounted three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and cross top or single lever operating members. The spout outlets incorporate a plastic aerator. The tee-piece connector to the spout incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The products are supplied with ⅜” BSP (M) x ½” BSP (F) threaded brass adaptors, intended for installation at each inlet, as well as Stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and spout tee-piece. The product can be supplied with or without a lever operated pop-up waste (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members controlling the cold water. Tap also has a quarter turn ceramic disc headwork using a dome type operating member incorporating a manual override button that is intended to control the flow of a boiling water supply (unit not supplied). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature cold water circuit 60°C Maximum operating temperature hot water circuit 90°C
Range of single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies), incorporating ceramic cartridge headworks, with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and ⅜” BSP (M) x ½” captive nut brass adaptors - intended for installation at the inlets. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
Range of floor mounted single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks, single lever or cross top operating members and self-cancelling diverter to shower outlet. Outlet incorporates an approved single check valve (however the complete assembly has not been tested to demonstrate that it provided adequate backflow protection). The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted (fixed) spout outlets with stainless steel bodies NBR ‘O’-rings and a plastic aerator. Maximum operating temperature 60°C.
Sensor control unit, flow is controlled using a solenoid valve assembly and is activated via infra-red non touch operation. The Art 30622 model has an in-line spherical valve on each inlet, as well as an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection The Art 30629 & 33725 model is supplied with two angled isolation valves and two stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections, which are intended to connect to the tee piece installed prior to the solenoid valve. The tee piece inlets incorporate a combined washer and stainless steel strainer and an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with either single lever or cross top operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Page 1 of 9
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.