Gessi S.p.A. Approvals


#2110397

Range of ceiling mounted shower outlets. The inlet to the shower head incorporates a combined NBR gasket and stainless steel filter, as well as a plastic flow regulator which is located after an adjustable ball joint. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2110397
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assembly with ½” captive nut end connection.
Marking:
Gessi Emporio on shower face.
Installation Requirements:
R001 R009 R040
Model:
33089, 33099.
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112308

Wall mounted, manually operated, concealed blending valves with cast brass bodies with chromium plated faceplates, incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2112308
Expiry date:
31/12/2026
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R010 R040
Model:
65131 & 54055
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112315

Range of wall mounted shower outlets with a brass bodies (chrome plated). The outlet incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2112315
Expiry date:
31/12/2026
Note:
Open outlet use only. No shower hose or handset is supplied as part of this approval.
Size:
½” BSP (M)
Marking:
Gessi outlet face.
Installation Requirements:
R001 R040
Model:
65169 65161
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112325

Range of wall mounted concealed thermostatic blending valves incorporating brass bodies with chrome plated trim sets, incorporating 1,2 or 3 way diverter valves (see models) controlling the flow with a single lever type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2112325
Expiry date:
31/12/2026
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R010 R040
Model:
09269+65133 (1 way) 09269+65135 (2 way) 09629+65137 (3 way)
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112348

Range of concealed two hole, single outlet (fixed) wall mounted tap assemblies, with a brass bodies and chrome plated trim set. Consisting of a rough in set 63397 and external trim 65088 and 65089. Incorproating a ceramic cartridge headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2112348
Expiry date:
31/12/2026
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R010 R040
Model:
65088+63397 65089+63397
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112349

Range of three hole, single outlet (fixed) wall mounted, concealed tap assemblies with brass bodies and chrome plated trim set. Consisting of a rough in set 45089 and extermnal trim 65090 and 65091. Incorproating a quarter turn ceramic disc headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2112349
Expiry date:
31/12/2026
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R010 R040
Model:
65090+45089 65091+45089
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2112350

Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Model 65001 and 65004 supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112350
Expiry date:
31/12/2026
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut with 3/8” BSP (M) adaptor.
Marking:
Gessi on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
65002 65004 Models with pop up waste: 65001 65003
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2201324

Range of shower outlets and shower kits. Shower outlets consisting of wall and ceiling mounted shower heads and hand shower. The inlets incorporate stainless steel flow regulators and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower kits can consist of shower hose, shower handset, riser rail and wall outlet elbow with bracket (depending on model). Shower handset inlet incorporates a stainless-steel strainer. Both the outlet of the wall elbow and inlet of shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2201324
Expiry date:
31/01/2027
Note:
Open outlet use only. R007 only applies to model 65127
Size:
See model
Marking:
Gessi on inlet (models 65142, 65123) Gessi on operating member (model 65144) Gessi on shower head (model 65154) Gessi on shower holder (model 65127) Gessi on base plate (models 65148, 65149, 65150, 65152, 65153, 65155)
Installation Requirements:
R001 R007 R040
Model:
½” BSP (M): 65123 - shower set 65142 - sliding rail with handshower 65148 - Wall mounted overhead shower 65149 - Wall mounted overhead shower 65150 - Overhead shower 65152 - Overhead shower 65153 - Overhead shower 65154 - Handshower 65155 - Overhead shower ½” Captive nut 65144 - Complete set with sliding rail 65127 – Deck mounted handshower kit
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2101074

Range of TPE and TPS lined flexible hose assemblies incorporating NBR ‘O’-rings and various end connections. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2101074
Expiry date:
31/01/2026
Note:
Open outlet use only.
Size:
see model
Marking:
IF logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:
R001
Model:
28773 1M Chrome 29744 1.25M Chrome 01637 1.5M Chrome 28746 2M Chrome 54137 1.5M Black HOSE ASSEMBLIES A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x 15X1M F = ½ “ BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = 15X1M x 15X1M L = 15X1M x 3/8” BSP (M) M = 15X1M x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x 12X1M U = ½” BSP (F) x 10x1M
Factor:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
IL Flessibile di Nicastri & C. S.r.l.
Company Name
IL Flessibile di Nicastri & C. S.r.l.
Address
General Email

View All Listings by this Company

Print This Approval


#2112352

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull-down spout with a plastic aerator, which also incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with optional ⅜” BSP (M) x ½” BSP (F) adaptors each with two fibre gaskets for installation on each inlet hose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2112352
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
60010, 60012, 60014.
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.