Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with either cross top or single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.
Wall mounted bib tap with a chromium plated brass body, incorporating a non-rising spindle headwork with a cross top operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.
Range of high-neck pillar taps with chromium plated brass bodies, incorporating ¼ turn ceramic disc headworks with either single lever, dome or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of shower outlet kits, consisting of a plastic shower handset - in either a chromium plated (C suffix) or white and chromium plated (WC suffix) finish - and an EPDM lined flexible shower hose. The products are also supplied with an adjustable riser assembly and soap tray. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valve with a chromium plated brass body.Temperature is pre-set under fixed cap. The valve body inlets incorporate an approved check valve cartridge, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. The product is supplied with plastic strainers and screwdriver operated spherical valves, intended for installation at each inlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type members. The spout outlets incorporate a plastic flow straightener and the products are supplied with a pop-up waste. Models VAC BAS E4 C MT & VAC BAS E6 C MT are also supplied with a plastic flow regulator, intended for installation at the inlets. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Exposed, bar type thermostatic shower valve (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a lever type operating member. The temperature is controlled independently via a thermostatic cartridge with single lever operating member. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention up to fluid category 2). The product is supplied with a shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of exposed thermostatic shower blending valves (chromium plated brass) Models AE SHCAR C, SOQ2 SHCAR C, MINI2 TS1203 CL C, MINI2 TS1203 CH C, KN2 SHXRR C incorporate a single sequential headwork controlling both the flow and temperature with single lever operating member . Models R2 SHXRR C, R2 SHXAR C, RO2 SHXAR C, R2 SHXVO C incorporate a non-rising headwork and with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with cross top operating members. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Concealed thermostatic shower blending valve (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporate stainless steel strainers and single check valve cartridges (suitable for backflow prevention up to fluid category 2) and the product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating non-rising spindle headwork with either cross top or dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.
Range of exposed thermostatic shower blending valves (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature using a single lever operating member. The inlets incorporate stainless steel strainers and incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products can be supplied as a valve only, with a shower hose and handset or with an over head riser. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Single hole, single outlet fixed combination tap assembly (Chrome plated brass), incorporating a quarter turn ceramic disk headwork with a single lever operating member. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure - 10.0 bar. Maximum operating temperature - 65°C
Range of single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator (WM SLE BASNW3.5 C) or plastic flow straightener (WM RYL BASNW4.5 C) Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C
Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a half turn ceramic disc headwork controlling the flow, thermostatic cartridge controlling the temperature and dome operating members with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protectionProduct is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating ¼ turn ceramic disc headworks and lever type operating members. The spout outlet incorporate a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Basin pillar taps (chrome plated brass) with ¼ turn ceramic disc headwork and cross top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Bath pillar taps (chromium plated brass) with ¼ turn ceramic disc headwork cross type operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating ceramic disc headwork and are supplied with lever type operating members. The spout outlet incorporate a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Self-closing combination tap assembly (chromium plated brass) with spring loaded headwork controlling both the flow and temperature with a dome type operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts and a plastic flow regulator. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C
Page 1 of 18
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.