Oventrop GmbH & Co KG Approvals


#2111071

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:
1715 Strainers
Size:
DN50 up DN400 flanged inlet and outlet
Marking:
Oventrop, size and pressure on data plate on body. Size, pressure and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
166 10 SERIES

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company

Print This Approval


#241102719

Range of swing gate valves with bronze bodies and brass or bronze discs. Maximum working pressure - 25 Bar Maximum operating temperature - 85 °C

Section:
2250 Valves
Section Subtitle:
Swing gate.
WRAS Approval Number:
241102719
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) – 2” BSP (F)
Marking:
Oventrop & flow arrow on valve body
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
Part No. 166 22

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company

Print This Approval


#241102068

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh. Maximum working pressure: 25 Bar. Maximum operating temperature: 66°C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) up to 2” BSP (F).
Marking:
Oventrop logo & flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
Part No. 166 12

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company

Print This Approval


#241102069

Range of gate valves with bronze bodies and wedges. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure: 25 Bar. Maximum operating temperature: 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
241102069
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) – 2” BSP (F).
Marking:
Oventrop & flow arrow on valve body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
Part No. 166 32

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company

Print This Approval


#251288002

Range of metering stations with DZR brass bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” -2” BSP (F) inlet x ½” -2” BSP (M) outlet (DN15 – DN50).
Marking:
OV, flow arrow and DN cast on body..
Installation Requirements:
R001
Expiry date:
31/12/2030
Model:
1060644, 1060634, 1060604, 1060606, 1060608, 1060610, 1060612, 1060616.

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company
Manufacturer:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company

Print This Approval


#260102725

Range of electronically controlled heat interface units (HIU) with a stainless-steel plate heat exchanger providing space heating and instantaneous hot water. The domestic hot water (secondary) circuit incorporates a pressure relief valve (set at 10.0 bar). The inlets and outlets of all circuits incorporate a T-handled spherical valve. Maximum working pressures: 10.0 bar (Primary circuit), 9.5 Bar (Secondary circuit). Maximum operating temperature 95°C. Cold supply only.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
260102725
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R511 applies to all spherical valves that can be used for draining the system down.
Size:
1½” BSP (M).
Marking:
Oventrop Logo on body.
Installation Requirements:
R001 R140 R360 R511
Expiry date:
31/01/2031
Proviso:
Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with Schedule 2 paragraph 7 of the Water Supply (Water Fittings) Regulations 1999.
Model:
1681580 - Requmaq X-80, 1681480 - Requmaq X-70.

Approval Holder:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.