Range of wall mounted shower outlets incorporating brass bodies (chrome plated) and integral flow regulators. Maximum operating temperature 60°C.
Mira Azora range of 9.8kW electric showers. The product is supplied with a shower hose and handset and a riser with a diverter and an overhead shower which is supplied by a short connecting hose. Maximum working pressure 10.0 bar. Maximum operating temperature 55°C.
Range of shower handsets with plastic bodies in various finishes. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C
Range of elbows (brass body with various finishes) and shower hoses. The inlet of the shower hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.
Wall mounted fixed spout outlet (chromium plated brass) with a plastic aerator. Maximum operating temperature 60°C
Wall mounted bath spout outlet with a brass body (chrome plated) and a plastic aerator. The spout outlet are supplied with a single lever type operating member. Maximum operating temperature 60°C.
Range of three hole, deck mounted, single outlet (fixed) combination tap assemblies (various finishes, see model) incorporating quarter turn ceramic disc headwork with either cross top or single lever operating members and interconnecting flexible hoses. The spout outlets incorporate a plastic aerator. Products are supplied with a pop-up waste. Maximum working pressure 4.1 bar. Maximum operating temperature 60°C.
Wall mounted bath spout outlet incorporating a brass body (chromium plated) and a plastic aerator. The product is supplied with a single lever type operating member. Maximum operating temperature 60°C.
Wall mounted concealed thermostatic shower valve, with a single sequential headwork controlling both flow and temperature. A manual diverter controls the flow between a shower handset or overhead shower. The inlets incorporate a single check valve however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.
Floor-standing single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.9 bar. Maximum operating temperature 60°C.
Range of shower handsets incorporating plastic bodies (various finishes). The inlet incorporates an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.
Range of overhead shower outlets incorporating metal bodies (various finishes) and flow regulator and strainer on the inlets. Maximum operating temperature 43°C.
Range of concealed, wall mounted, thermostatic mixer valves with brass bodies (various finishes) with 1 - 6 outlets. Flow is controlled to each outlet by ‘detent’ (push to on push to off) headworks. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate a combined plastic washer and stainless steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted concealed (BIV & BIR models) and exposed (EV model) thermostatic shower control valves. The bodies are cast brass (concealed versions) with a chromium plated trim set or chromium plated brass (exposed versions). Flow and temperature are controlled by a thermostatic cartridge with a single lever operating member. The inlets incorpoarate stainless steel strainers. Some models are supplied with a shower hose and handset or an overhead shower arm and shower head with flow regulator (see model section). The BIV model is also supplied with an angled wall outlet elbow. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Range of two-hole, single outlet combination tap assemblies (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower handsets and an overhead shower outlet with plastic bodies (chrome plated, chrome plated/white or chrome plated/black coloured finish - see model). The inlet of the 2.1981.018 model incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Non-metallic materials and components comply with BS6920 at 55°C
Range of high pressure and low pressure thermostatic mixing valves. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Low pressure models incorporate a pump. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves marked with ‘LP’ have a maximum working pressure of 1.0 bar.
Non-metallic materials and components comply with BS6920 at 45°C
Range of pillar taps, (chrome plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 45 C.
Range of wall mounted exposed and concealed thermostatic shower valves, chrome plated brass body or brass bodies with chrome trim sets). Incorporating a single sequential headwork controlling both flow and temperature with single lever operating members. The inlets incorporate plastic flow regulators. Model (1.1656.011) is supplied with a shower hose, handet and riser rail assembly. Model (1.1656.012) is supplied with a wall mounted shower outlet, hose, handset and riser rail assembly. Model (1.1656.013) is supplied with a wall mounted shower arm and an overhead shower. Maximum operating pressure 5 bar. Maximum operating temperature 65°C
Range of wall mounted concealed and exposed thermostatic shower valves, (chrome plated brass bodies or chrome trim sets), incorporating single sequential headworks controlling both the flow and temperature. The inlets incorporate single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with flow regulators. Maximum operating pressure 5.0 bar. Maximum operating temperature 50°C
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
