IDC Plumbing & Heating Technology (Beijing) Ltd Approvals


#2211700

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2211700
Expiry date:
30/11/2027
Size:
see model
Marking:
IDC Fluid Control logo (E), WRAS and year of manufacture on crimp connection
Installation Requirements:
R001
Model:
½“ compression x ½" (F) BSP captive nut: SCFA551 - DN10 SCFA553 - DN13 SCFC558 - DN8 SCFC553 - DN13 ¾“ compression x ¾" (F) BSP captive nut: SCFA773 - DN13 SCFC773 - DN13 SCFC779 - DN19
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2201061

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The 1BCB001 & 1BCB701 models incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
2201061
Expiry date:
31/01/2027
Size:
½” BSP (M).
Marking:
1BCA001: BS1010-2, IDC ‘E’ Logo and size on body. 1BCB001: BS1010, BS6282, IDC ‘E’ logo, CR and size on body. 1BCB701: BS1010, BS6282, IDC ‘E’ logo and size on body.
Installation Requirements:
R001 R040
Model:
Brass body: 1BCA001, 1BCB701. DZR brass body: 1BCB001.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2209021

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209021
Expiry date:
30/09/2027
Marking:
IDC logo (~E~ within a circle), size, PN, flow arrow and CR on body
Installation Requirements:
R001
Model:
ACV0030501 ½” BSP (F) inlet/outlet ACV0030402 ¾” BSP (F) inlet/outlet ACV0030701 1” BSP (F) inlet/outlet ACV0030601 1.1/4" BSP (F) inlet/outlet ACV0030801 1½” BSP (F) inlet/outlet ACV0030901 2” BSP (F) inlet/outlet
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2212002

Spherical valve (lever operated) with a DZR brass body, brass ball and PTFE seat. The second outlet incorporates two approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). There is a test port located between the check valve cartridges. For use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2212002
Expiry date:
31/12/2027
Size:
15mm compression inlet x 1/2" BSP captive nut outlet x 1/2" BSP male outlet
Marking:
IDC “E” logo, PN, CR, flow arrow on body and EN1254-2 and size on compression nut.
Installation Requirements:
R001
Model:
2BEH0111
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
Zhejiang IDC Fluid Control Co Ltd
Company Name
Zhejiang IDC Fluid Control Co Ltd
Address
Machinery Industrial Park Zhugang Town Yuhuan County

View All Listings by this Company

Print This Approval


#2304033

Range of non-verifiable single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2304033
Expiry date:
30/04/2028
Size:
See Models
Marking:
IDC “E” logo. PN, Size, CR and flow arrow on body
Installation Requirements:
R001
Model:
ACV0040101 (1/2” BSP (F)), ACV0040201 (3/4” BSP (F)), ACV0040301 (1” BSP (F)), ACV0040401 (1.1/4” BSP (F)), ACV0040501 (1.1/2” BSP (F)), ACV0040601 (2” BSP (F))
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#2304076

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1770 Taps
Section Subtitle:
Draining, metal or plastic - For above ground use only.
WRAS Approval Number:
2304076
Expiry date:
30/04/2028
Size:
See Models
Marking:
IDC E Mark (~E~ inside a circle), CR and size on body (DZR Brass Models) IDC E Mark (~E~ inside a circle) and size on body (Brass Models)
Installation Requirements:
R001 R511
Model:
DZR Brass Models: 1DCAa001 (15mm Spigot) 1DCAa001L (15mm Spigot) 1DCAa101 (1/2” BSP (M)) 1DCAa102 (3/4” BSP (M)) Brass Models (can be chrome plated or not): 1DCA001 (15mm Spigot) 1DCA001L (15mm Spigot) 1DCA001LNP (15mm Spigot) 1DCA101 (1/2” BSP (M)) 1DCA102 (3/4” BSP (M))
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#2309504

'TFM1700'. White coloured, injection moulded PTFE ring. For use with water up to 85°C.

Section:
5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:
Components.
WRAS Approval Number:
2309504
Expiry date:
30/09/2028
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#2312011

Range of press fit screw down stop valves with brass bodies incorporating EPDM seat washers, PTFE seals and non-rising spindles operated via ‘T’ type operating members For use with copper tube to BS EN 1057. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2312011
Expiry date:
31/12/2028
Size:
See models
Marking:
IDC, DN, Size and flow arrow on body
Installation Requirements:
R001
Model:
1SUD044 (15mm Press-fit) 1SUD055 (22mm Press-fit)
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company

Print This Approval


#240102023

Range of lever or butterfly operated spherical valves with brass or nickel-plated brass (CC617 and Arc89) or DZR brass bodies (CCDZR). Incorporating brass or nickel-plated brass (CC617 and Arc89 ) or DZR brass ball (CCDZR). For use with copper pipe BS EN 1057. Maximum working pressure 25.0 Bar. Maximum operating temperature 99.0°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240102023
Expiry date:
31/01/2029
Size:
See models
Marking:
IDC (E)logo, DN, PN and size on body. IDC (E) logo, DN,PN, CR and size on body – DZR models.
Installation Requirements:
R001
Model:
CC617 range – 15mm to 54mm compression. Arc89 range - 15mm to 54mm compression. CCDZR range - 15mm to 54mm compression.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval


#240102029

Range of lever or butterfly operated spherical valves with brass or nickel plate bodies and ball, (DZR brass body and ball on FFDZR prefix models). Maximum working pressure: Various – see model section. Maximum operating temperature 99.0°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240102029
Expiry date:
31/01/2029
Size:
See models – All models BSP (F) x (F)
Marking:
All Models: IDC logo, PN, DN & size on body FFDZR Models: IDC logo, PN, DN, size and CR on body
Installation Requirements:
R001
Model:
ART54 Series: 32.0 BAR: ART54FF0025: ¼”. BSP ART54FF0038: ⅜”. BSP ART54FF0050: ½”. BSP ART54FF0075: ¾”. BSP ART54FF0100: 1”. BSP ART54FF0025P: ¼”. BSP ART54FF0038P: ⅜”. BSP ART54FF0050P: ½”. BSP ART54FF0075P: ¾”. BSP ART54FF0100P: 1”. BSP 25.0 Bar: ART54FF0125: 1¼ ”. BSP ART54FF0150: 1½ ”. BSP ART54FF0200: 2”. BSP ART54FF0125P: 1¼ ”. BSP ART54FF0150P: 1½ ”. BSP ART54FF0200P: 2”. BSP 16.0 Bar: ART54FF0250: 2 1/2” BSP ART54FF0300: 3” BSP ART54FF0400: 4” BSP ART54FF0250P: 2 1/2” BSP ART54FF0300P:3” BSP ART54FF0400P:4” BSP FF617 range: 40.0 Bar: FF617 -0025: ¼”. G or RC thread FF617 -0038: ⅜”. G or RC thread FF617 -0050: ½”. G or RC thread FF617 -0075: ¾”. G or RC thread FF617 -0100: 1”. G or RC thread FF617 -0125: 1¼ ”. G or RC thread FF617 -0150: 1½ ”. G or RC thread FF617 -0200: 2”. G or RC thread FF617 -0025P: ¼”. G or RC thread FF617 -0038P: ⅜”. G or RC thread FF617 -0050P: ½”. G or RC thread FF617 -0075P: ¾”. G or RC thread FF617 -0100P: 1”. G or RC thread FF617 -0125P: 1¼ ”. G or RC thread FF617 -0150P: 1½ ”. G or RC thread FF617 -0200P: 2”. G or RC thread 25 Bar: FF617-0250: 2 1/2” BSP FF617-0300: 3” BSP FF617-0400: 4” BSP FF617-0250P: 2 1/2” BSP FF617-0300P:3” BSP FF617-0400P:4” BSP FFDZR Range: 40.0 Bar: FFDZR -0025: ¼”. G or RC thread FFDZR -0038: ⅜”. G or RC thread FFDZR -0050: ½”. G or RC thread FFDZR -0075: ¾”. G or RC thread FFDZR -0100: 1”. G or RC thread FFDZR -0125: 1” ¼” G or RC thread FFDZR -0150: 1” ½” G or RC thread FFDZR -0200: 2” G or RC thread FF617 & FFDZR series ¼” – 1” with lever or butterfly handle Standard of G type thread: ISO 228 Rc for internal taper pipe thread: BS EN 10226
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.