Range of thermostatic cartridges with plastic bodies and EPDM ‘O’-rings. All models incorporate a plastic strainer. For insertion into specifically dimensioned bores. Maximum working pressure 16 bar. Maximum operating temperature 60°C.
Range of shower handsets (various finishes) incorporating stainless steel strainers. Model 28 588 xxx incorporates flow regulator. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of floor and wall mounted two-hole, single outlet fixed combination taps assemblies (various finishes) incorporating quarter turn ceramic disc headworks and manual diverter to shower outlet with either single lever operating members on model 16 553 XX0 or cross top on models 16 540 XX0/16 547 XX0. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate plastic aerators and the products are supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Two hole, single outlet (swivel) combination tap assembly (brass body - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout is supplied with a stainless steel braided PEX lined flexible hose assembly and a brass connecting nipple for installation onto a quick connect polyamide braided PE lined flexible hose assembly from the headwork. The quick connect hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, two-hole, bar type thermostatic blending valve (various finishes, see model) incorporating a half turn ceramic disc for diverting flow between bath/off/shower positions and a thermostatic cartridge controlling the temperature independently, both with dome type operating members. The product also incorporates a self-cancelling diverter to a shower handset. The product is supplied with an overhead shower outlet , shower hose and handset. The spout outlet incorporates a plastic aerator. Each inlet Incorporates approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, thermostatic blending valves with chrome plated brass bodies. The temperature is controlled by a dome type operating member which controls the thermostatic cartridge and a wheel type operating member which controls the ceramic discs which in turn control the shower outlets. The inlets incorporate an approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. The product comes supplied with a shower hose and handset and overhead shower and riser. Maximum working pressure 10.0 bar Maximum operating temperature 65°C
Range of shower handsets with chrome plated plastic bodies and EPDM O-rings. The inlets incorporate a plastic strainer. Maximum operating temperature 60°C.
A range of concealed thermostatic shower valves with trim sets in a variety of finishes (See models). Incorporating ¼ turn ceramic headworks with a single lever type operating member controlling the flow to all outlets and then push-button cartridges controlling the flow of the individual outlets. The temperature is controlled via a thermostatic cartridge with a single lever operating member with a manual override button. Hose and handset not supplied. The inlets of all models incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 70°C
Range of shower outlets and shower arms (brass bodies - various finishes - see model). The wall mounted and ceiling mounted shower heads incorporate integral plastic flow regulators and also include stainless steel strainers on the inlets. The shower handset has a plastic flow regulator and a stainless steel strainer on the inlet. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The product also incorporates a separate ¼ turn ceramic disc headwork which supplies a stainless steel braided PEX lined flexible outlet hose assembly incorporating a ½” BSP (M) end connection. This outlet hose is supplied with an optional fibre gasket and ½” BSP (F) x ¾” BSP (M) brass adaptor and is intended to supply an appliance, with the quarter turn ceramic disc headwork acting as a shut-off valve. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (brass body, various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product can be supplied with a pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, manual blending valve (brass body, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, two-hole, single outlet (fixed) combination tap assembly, comprising of a concealed brass body, and a separate trim set (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a spout outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, thermostatic shower valves with brass bodies (various finishes), incorporating a thermostatic cartridge controlling the temperature and a push shut-off valve controlling the flow. The inlets and the shower outlet incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Range of shower handsets with chrome plated plastic bodies. The inlets incorporate a plastic flow regulator and strainer. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator and the products are supplied with lever operated pop up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic disc diverter headwork controlling flow and diverters to either bath or shower via a dome operating member. A thermostatic cartridge controls temperature with a dome operating member incorporating a manual override button. The spout outlet incorporates a plastic aerator. Inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Spout supplied with an aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Wall mounted, manually operated blending valve with a brass body (various finishes) and ceramic cartridge headwork a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C
Overhead shower outlets with brass bodies (various finishes), incorporating EPDM O rings. Maximum working pressure: Open outlet Maximum operating temperature 60.0°C
Page 10 of 20
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
