Hansgrohe SE Approvals


#2011306

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011306
Expiry date:
30/11/2025
Note:
No testing has bee performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
71164xxx - Hansgrohe Logis E OHM 70 CoolStart. 71165xxx - Hansgrohe Logis E OHM 100 CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011011

Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2011011
Expiry date:
30/11/2025
Size:
¾” to ½” Offset Unions.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R010 R040
Model:
15 672 xxx Hansgrohe PuraVida Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011012

Single hole, single outlet (waterfall spout) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The inlets incorporate a stainless-steel strainer and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011012
Expiry date:
30/11/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nuts.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010 R160
Model:
14 127 xxx Hansgrohe Talis Classic Single lever basin mixer 90 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011014

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Products come with pop up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011014
Expiry date:
30/11/2025
Note:
No testing performed on the pop-up waste.
Size:
Stainless steel or nylon braided PEX lined flexible hoses with 3/8” BSP (M) captive nut connections.
Marking:
AXOR on body.
Installation Requirements:
R001 R006 R009 R010
Model:
34 010 xxx AXOR Citterio M with pop-up waste set 34 016 xxx AXOR Citterio M with pop-up waste set 34 017 xxx AXOR Citterio M with waste set 34 127 xxx AXOR Citterio M with waste set.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011015

Range of shower handsets, various finishes. All models incorporate a stainless-steel strainer in the inlet. The inlet of model 26 090 also incorporates a plastic flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011015
Expiry date:
30/11/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R040
Model:
Vernis Blend Hand shower Vario range: 26 090 xxx. 26 270 xxx. 26 340 xxx EcoSmart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2011013

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating member. The spout outlets incorporate a plastic aerator. Some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011013
Expiry date:
30/11/2025
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless Steel braided, PEX lined flexible hose assemblies with a 3/8” BSP (F) captive nuts.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
31 075 xxx Hansgrohe Metris Classic with pop-up waste set. 31 077 xxx Hansgrohe Metris Classic without waste set. 31 078 xxx Hansgrohe Metris Classic for washbowls with pop-up waste set. 31 300 xxx Hansgrohe Metropol Classic with pop-up waste set. 31 301 xxx Hansgrohe Metropol Classic without waste set. 31 302 xxx Hansgrohe Metropol Classic with pop-up waste set. 31 303 xxx Hansgrohe Metropol Classic for washbowls with pop-up waste set. Where xxx denotes the surface finish which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2006015

Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 65°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2006015
Expiry date:
30/06/2025
Note:
Open outlet use only.
Size:
½” BSP captive nut
Marking:
Hansgrohe or AXOR (brand of Hansgrohe) on captive nut.
Installation Requirements:
R001
Model:
28 278 xxx Hansgrohe IsIflex. 30 330 818 Isi. 30 723 718 Isiflex'B. 28 272 xxx Hansgrohe IsIflex. 30 182 018 Isi. 30 331 218 Isi. 28 622 xxx AXOR. 28 277 xxx Hansgrohe IsIflex. 28 712 xxx HG Isiflex B. 30 331 518 Isi. 30 922 118 Isiflex'B. 28 276 xxx Hansgrohe IsIflex. 30 182 118 Isi. 30 321 518 AX Isiflex Special. 30 331 618 Isi TPE. 30 331 688 HG Isi. 31 182 118 Isi. 32 182 118 Isi. 34 182 118 Isi. 28 626 xxx AXOR. 28 275 xxx Isiflex`C. 28 713 xxx HG Isiflex B. 30 331 718 Isi. 30 923 518 Isiflex'B. 28 245 xxx Hansgrohe Isiflex. 30 213 018 Isi. 28 274 xxx Hansgrohe Isiflex. 28 714 xxx HG Isiflex B. 30 182 218 Isi. 30 332 018 Isi. 30 332 088 HG Isi. 30 922 218 Isiflex'B. 31 182 218 Isi. 28 624 xxx AXOR. 30 899 618 Isiflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Models ending 002 are hoses sold in blister packs. These are only available in chrome.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2012021

Two-hole, single outlet, (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2012021
Expiry date:
31/12/2025
Size:
½” by ¾” BSP (M) Offset Unions.
Marking:
AXOR (brand of Hansgrohe) on body.
Installation Requirements:
R001 R030
Model:
10 411 xxx AXOR Starck Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2012028

Range of wall mounted, flow control valves with brass bodies and various trim sets (various finishes). Flow is controlled to the outlets via a push to on push to off ‘detent’ headwork. Maximum Working Pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2012028
Expiry date:
31/12/2025
Size:
For insertion into Hansgrohe I-box with ¾” BSP (F) inlet/outlet
Marking:
Hansgrohe or AXOR on backing plate.
Installation Requirements:
R001 R010 R040
Model:
Hansgrohe ShowerSelect Valve for concealed installation for 3 functions: 15 745 xxx 15 764 xxx 36 717 xxx AXOR - square 36 727 xxx AXOR - round 36 773 xxx AXOR - softcube Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/ or letters, as examples: 00 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101347

Angled stop valve with a chrome plated brass body and NBR ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2101347
Expiry date:
31/01/2026
Size:
½” BSP (M).
Marking:
Hansgrohe on handle. HG and P797IA on body.
Installation Requirements:
R001
Model:
13901000
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101002

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Models 10 102 xxx & 10 103 xxx are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101002
Expiry date:
31/01/2026
Size:
Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP captive nut.
Marking:
AXOR on body
Installation Requirements:
R001 R006 R009 R010
Model:
AXOR Starck Single range: 10 001 xxx 10 003 xxx 10 007 xxx 10 102 xxx 10 103 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101006

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks with cross top type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2101006
Expiry date:
31/01/2026
Note:
The 10 303 180 Basic set is not approved in its own right.
Size:
½” BSP (F)
Marking:
AXOR on spout
Installation Requirements:
R001 R010 R040
Model:
10 303 180 Basic set for 3-hole wall mixer for concealed installation, which must be installed in conjunction with the following models: 36 107 xxx AXOR Citterio E3-hole basin mixer for concealed installation wall-mounted with spout 220 mm and escutcheons, 36 115 xxx AXOR Citterio E3-hole basin mixer for concealed installation wall-mounted with spout 220 mm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2101015

Range of single hole bidet taps with brass bodies (various finishes) and swivel spout outlets. The products incorporate a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a lever operated waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
2101015
Expiry date:
31/01/2026
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with a 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
71210XXX Vernis Blend with pop-up waste. 71211XXX Vernis Shape with pop-up waste. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101016

A range of single-hole, single outlet, (swivel) combination tap assemblies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Models 71554XXX and 71564XXX are supplied with pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101016
Expiry date:
31/01/2026
Note:
No testing preformed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on base of body.
Installation Requirements:
R001 R006 R009 R010
Model:
71554XXX - Vernis Blend. 71564XXX - Vernis Shape. 71870XXX - Vernis Blend M35. 71871XXX - Vernis Shape M35. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101056

Range of pillar taps with brass bodies (chromium plated) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2101056
Expiry date:
31/01/2026
Size:
Stainless steel braided, PEX lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on front of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
Vernis 71583XXX Vernis 71592XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101057

Range of single-hole single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and some models are supplied with pop-up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2101057
Expiry date:
31/01/2026
Note:
No testing performed on the pop-up wastes.
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
Vernis Blend with pop-up waste: 71550XXX 71551XXX 71557XXX 71559XXX 71584XXX 71585XXX 71593XXX 71594XXX 71566XXX 71568XXX 71560XXX 71561XXX Vernis Blend without pop-up waste: 71558XXX 71569XXX 71567XXX 71580XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2101062

Range of wall mounted flow control valves and trim kits (various finishes) with brass bodies incorporating a quarter turn ceramic disc headwork with various operating members (see model). The outlet of all models, except for the 38 882 xxx AXOR Uno model, incorporates a single check valve cartridge, (verified by test suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2101062
Expiry date:
31/01/2026
Size:
½” BSP (M)
Marking:
AXOR or Hansgrohe on wall trim
Installation Requirements:
R001 R040
Model:
16 882 xxx Axor Montreux (cross top) 16 883 xxx Axor Montreux (single lever) 27 452 xxx Hansgrohe Fixfit (dome) 38 882 xxx Axor Uno (dome) 39 882 xxx Axor Citterio (single lever) 39 883 xxx Axor Citterio (cross top) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#2104013

Range of concealed thermostatic blending valves with brass bodies and trim sets (various finishes - see model). The temperature is controlled via a thermostatic cartridge with a dome type or single lever operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104013
Expiry date:
30/04/2026
Note:
The Hansgrohe iBox is not covered by this approval.
Size:
Body for insertion into Hansgrohe iBox (018001810).
Marking:
Hansgrohe on face plate.
Installation Requirements:
R001 R010 R040
Model:
15 705 xxx Hansgrohe Ecostat E Thermostat for concealed installation 15 755 xxx Hansgrohe Ecostat S Thermostat for concealed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2104049

Range of wall mounted, thermostatic blending valves with brass bodies (various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104049
Expiry date:
30/04/2026
Note:
This approval does not include a shower hose and handset. The 01800180 Basic set iBox universal is not approved in its own right.
Size:
¾” BSP (F) (to 01800180 Basic set iBox universal)
Marking:
AXOR on face plate.
Installation Requirements:
R001 R010 R040
Model:
Concealed body: 01800180 Basic set iBox universal for use with 46 750 xxx & 46 751 xxx trim and control sets. Trim and control sets: 46 750 xxx - AXOR Edge 46 751 xxx - AXOR Edge Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2107043

Wall mounted, exposed, two-hole single outlet, fixed, combination tap assemblies (brass body – various finishes) incorporating two ‘detent’ (push to on push to off) headworks, one controlling the flow to the bath outlet and the other to the shower outlet. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets and the shower outlet incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The inlets also incorporate a stainless-steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0540 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, shower outlet.
WRAS Approval Number:
2107043
Expiry date:
31/07/2026
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (M).
Marking:
Hansgrohe on top of body.
Installation Requirements:
R001 R010 R040
Model:
13 151 XXX ShowerTablet Select Bath thermostat 300 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 21

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.