Range of wall mounted, manually operated shower valves, (brass bodies - various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The shower outlet connection incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

2304043

Expiry date:

31/01/2028

Note:

Shower hose and handset are not supplied as part of this approval.

Size:

½” x ¾” BSP offset union

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Model:

32 560 xxx 74 560 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly, (brass body - various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304051

Expiry date:

30/04/2028

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided (PEX) lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Model:

31 087 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2304055

Expiry date:

30/04/2028

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on shower face

Installation Requirements:

R001 R040

Model:

27 441 xxx Hansgrohe Croma 100 Vario Overhead Shower 27 443 xxx Hansgrohe Croma 100 Multi Overhead Shower 28 462 xxx Hansgrohe Croma 100 Vario EcoSmart Overhead Shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Inc

Company Name

Hansgrohe Inc

Address

1490 Bluegrass Lakes Pkwy Alpharetta GA 30004

View All Listings by this Company

Range of two-hole, single outlet, (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout incorporates and a self-cancelling diverter to the shower outlet and plastic aerators. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. This product is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2304057

Expiry date:

30/04/2028

Size:

¾” BSP (M)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R005 R030

Model:

31 422 xxx Hansgrohe Metris 2-hole rim mounted bath mixer with diverter valve and Croma 100 Vario hand shower 31 426 xxx Hansgrohe Talis 2-hole rim mounted bath mixer with diverter valve and Croma 100 1jet hand shower 31 521 xxx Hansgrohe Focus 2-hole rim mounted bath mixer with diverter valve and Crometta 85 1jet hand shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, two-hole, thermostatic blending valves, (chrome plated brass bodies) incorporating two detent headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge with switch type operating member that incorporates a manual override button. The product is supplied with an overhead shower, shower hose, handset and riser rail assembly. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2304067

Expiry date:

30/04/2028

Size:

½” BSP Male

Marking:

Hansgrohe on body, hand shower and overhead shower

Installation Requirements:

R001 R010 R040

Model:

27 126 000 Hansgrohe Raindance Select E Showerpipe 300 2jet with ShowerTablet Select 300 27 126 400 Hansgrohe Raindance Select E Showerpipe 300 2jet with ShowerTablet Select 300 27 127 000 Hansgrohe Raindance Select E Showerpipe 300 3jet with ShowerTablet Select 300 27 127 400 Hansgrohe Raindance Select E Showerpipe 300 3jet with ShowerTablet Select 300 27 283 000 Hansgrohe Raindance Select E Showerpipe 300 2jet EcoSmart 9 l/min with ShowerTablet Select 300 27 283 400 Hansgrohe Raindance Select E Showerpipe 300 2jet EcoSmart 9 l/min with ShowerTablet Select 300 27 288 000 Hansgrohe Raindance E Showerpipe 360 1jet with ShowerTablet Select 300 27 288 400 Hansgrohe Raindance E Showerpipe 360 1jet with ShowerTablet Select 300

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated – brass bodies). Flow is controlled via a solenoid which is actuated via an infrared sensor and the temperature is controlled by a manual lever. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2304069

Expiry date:

30/04/2028

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Model:

10 145 000 Axor Stark electronic basin mixer with temp pre adjustment with 230 V mains connection. 10 101 000 Axor Stark electronic basin mixer with temp control battery operated. 10 106 000 Axor Stark Electronic basin mixer with temp pre-adjustment battery-operated. 10 140 000 Axor Stark Electronic basin mixer with temp control with 230 V Mains connection. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower and shower arm assemblies, (brass bodies - various finishes), incorporating a flow restrictor and stainless steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2304077

Expiry date:

30/04/2028

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Model:

Shower Head – 24 330 xx0, 24 331 xx0, 24 333 xx0 Shower Arm – 24 337 xx0, 24 338 xx0, 24 339 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies -various finishes), incorporating ceramic cartridge headworks and single lever operating members. The Spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see list). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304315

Expiry date:

30/04/2028

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

Rebris S range: 72 510 xxx with pop-up waste set 72 513 xxx with pop-up waste set 72 514 xxx without waste set 72 517 xxx with pop-up waste set 72 519 xxx with pop-up waste set 72 520 xxx without waste set 72 527 xxx with metal pop-up waste set 72 580 xxx with pop-up waste set 72 582 xxx without waste set 72 584 xxx with metal pop-up waste set 72 586 xxx with pop-up waste set 72 588 xxx with pop up waste set 72 590 xxx with pop-up waste set Rebris E range: 72 550 xxx with pop-up waste set 72 551 xxx with metal pop-up waste set 72 553 xxx with pop-up waste set 72 554 xxx without waste set 72 557 xxx with pop-up waste set 72 559 xxx with pop-up waste set 72 560 xxx without waste set 72 581 xxx with pop-up waste set 72 583 xxx without waste set 72 585 xxx with metal pop-up waste set 72 587 xxx with pop-up waste set 72 589 xxx with pop up waste set 72 591 xxx with pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. temperature 65.0°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

2303030

Expiry date:

31/03/2028

Size:

1/2" BSP (F)

Marking:

AXOR on body

Installation Requirements:

R001 R010 R040

Model:

39171XXX – AXOR Citterio 39181XXX – AXOR Citterio 39119XXX – AXOR Citterio 39121XXX – AXOR Citterio

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with a click type pop-up waste. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304007

Expiry date:

30/04/2028

Size:

Stainless steel braided, PEX lined hose incorporating 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

32 502 xx0 32 503 xx0 32 507 xx0 32 508 xx0 74 502 xx0 74 507 xx0

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of ceramic cartridge headworks with plastic bodies, for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0440 Headworks

WRAS Approval Number:

2305005

Expiry date:

31/05/2028

Size:

M35 Ø

Marking:

Hansgrohe on body

Installation Requirements:

R001

Model:

30218400, M35S 30218410, M35EcoS 30218420, M35LS 30347500, M35XS 30347501, M35LXS 30347502, M35EcoXS

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted, concealed, manually operated blending valve with a DZR brass body and chromium plated trim, incorporating a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

2307700

Expiry date:

31/07/2028

Size:

½” BSP (F)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Model:

71 608 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), with a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305008

Expiry date:

31/05/2028

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Model:

10 822 xxx Single lever kitchen mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet, fixed, combination tap assemblies (brass bodies - various finishes ) incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Products are supplied either with or without a lever type pop-up waste set (see models). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305009

Expiry date:

31/05/2028

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections (model 31 082 xxx) or Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections (all other models).

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

31 080 xxx - Single lever basin mixer 110 with pop-up waste set 31 082 xxx - Single lever basin mixer 260 for washbowls with pop-up waste set 31 084 xxx - Single lever basin mixer 110 without waste set 31 203 xxx - Single lever basin mixer 110 LowFlow with pop-up waste set 31 204 xxx - Single lever basin mixer 110 LowFlow without waste set 31 121 xxx - Single lever basin mixer 110 CoolStart with pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating detent (push to open, push to close) type headworks controlling both temperature and flow with a dome operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a lever type pop up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305010

Expiry date:

31/05/2028

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided (PEX) lined flexible hose assemblies incorporating 3/8” captive nut end connections.

Marking:

AXOR on body

Installation Requirements:

R001 R006 R009 R010

Model:

45 010 xxx 45 012 xxx 45 013 xxx 45 014 xxx 45 015 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Three-hole, single outlet (fixed) combination tap assembly, (chromium plated or PVD plated brass body). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste and stainless steel braided PEX lined flex hose assemblies for connecting the spout and headworks. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2305011

Expiry date:

31/05/2028

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided, PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.

Marking:

Axor on spout

Installation Requirements:

R001 R006 R007 R009 R010

Model:

34 133 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower outlet elbows (brass bodies - various finishes) with a shower handset holder. The product incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure - 10 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2306705

Expiry date:

30/06/2028

Marking:

Axor on body

Installation Requirements:

R001 R040

Model:

11 626 xxx – Axor ShowerSolutions Porter Unit SoftSquare 36 724 xxx – Axor Citterio E Porter Unit 120/120 SoftSquare Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets (brass bodies – various finishes). The inlets incorporate a plastic flow regulator. Model 26 221 xxx incorporates a stainless-steel strainer, all other models incorporate a plastic strainer. Maximum operating temperature 60.0°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2306706

Expiry date:

30/06/2028

Size:

½” BSP (M) inlet

Marking:

Hansgrohe logo on side or face of showerhead

Installation Requirements:

R001 R040

Model:

26 220 xxx – Hansgrohe Croma Overhead Shower 280 1Jet 26 221 xxx – Hansgrohe Croma Overhead Shower 280 1Jet EcoSmart 9 L/min 27 474 xxx – Hansgrohe Raindance S Overhead Shower 240 1Jet with shower arm 27 477 xxx – Hansgrohe Raindance S Overhead Shower 240 1Jet with ceiling connector Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). Incorporating a detent (push to open and push to close) ceramic cartridge headworks, and cube type operating members. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate stainless steel strainers and a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a click type pop up waste. Maximum working pressure 10.0 Bar.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2305024

Expiry date:

31/05/2028

Size:

Stainless steel braided, PEX lined hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Model:

32 570 xxx 32 571 xxx 32 572 xxx xxx denotes the surface finish (which is a non-water contact part). examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes). The inlets incorporate flow restrictors, model 24320xxx has a plastic strainer at the inlet, model 24321xxx has a stainless steel strainer at the inlet. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2305026

Expiry date:

31/05/2028

Size:

½” BSP male

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Model:

24 320 xxx 24 321 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = Chrome optic finish, 800 = PVD stainless steel optic finish

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company