Grohe AG Approvals


#240202040

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies (brass body, various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240202040
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8” captive nut end connections.
Marking:
23.117.xxx - Grohe logo on body. 24.347.xxx – Grohe Spa logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
28/02/2029
Model:
23.117.XXX, 24.347.XXX. XXX denotes finish: 000 – Chrome, DC0 – Super Steel, AL0 – Brushed Hard Graphite.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240204053

Range of angle valves (brass bodies – various finishes), incorporating non-rising spindle headworks with a dome type operating members and NBR O-rings and PTFE Seals. Maximum working pressure 10 bar. Maximum operating temperature – Cold Water Use

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
240204053
Size:
½” BSP (M) x 10mm Compression ½” BSP (M) x ½” BSP (M)
Marking:
Grohe on Valve Body
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
22.046.XXX - ½’’ x ½’’ 22.045.XXX - ½” x 3/8” 22.043.XXX - ½’’ x ½’’ 22.041.XXX - ½’’ x ½’’ 22.039.XXX - ½” x 3/8” 22.037.XXX - ½” x 3/8” 22.032.XXX - ½’’ x ½’’ 22.031.XXX - ½’’ x ½’’ 22.029.XXX - ½” x 3/8” 22.073.2430 - ½” x 3/8” 22.074.XXX - ½” x 3/8” XXX denotes different available finishes like 000 = chrome DL0 = brushed warm sunset AL0 = brushed hard graphite KF0 = phantom black

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2312349

Range of wall mounted, concealed, bath-shower mixer valves (brass bodies, chromium plated trim sets) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to two outlets. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2312349
Size:
½” BSP (F)
Marking:
Grohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
29.081.001 - BAULOOP

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240402021

Wall mounted, concealed, three-hole, single outlet combination tap assembly (brass body - various finishes). The product incorporates quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240402021
Size:
20.589.XXX is specifically for use with 29.025.002 which has ½” BSP (F) inlets.
Marking:
GROHE SPA on spout.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2029
Model:
20.589. XXX. Installation set = 29.025.002. Where XXX denotes finish, which can be replaced by the following: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240404022

Range of two hole, single outlet (fixed) wall mounted combination tap assemblies (chromium plated brass spout) incorporating a ceramic cartridge headwork with a joystick operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240404022
Size:
½” BSP (F).
Marking:
Spout Etched Grohe.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2029
Model:
19 968 000 2 Hole Basin Mixer, 19 969 000 2 Hole Basin Mixer. To be installed in conjunction with the concealed body (rough-in kit): 23 429 000.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2309326

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a plastic flow straightener and supplied with a flow regulator. Model 23.112 is supplied with a lever type pop-up waste (not tested). Maximum working pressure 10 bar. Maximum working temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2309326
Size:
Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2028
Model:
Allure Brilliant ½” L-Size Range: 23.109.xxx - including pop-up waste set, 23.112.xxx – without pop-up waste set. XXX defines different available coloured finishes. 000 = chrome DC0 = supersteel AL0 = Brushed Hard Graphite A00 = Hard Graphite
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240502011

Three hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies, for use between the valves and spout. Also supplied with a lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240502011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M).
Marking:
GROHE SPA on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
20.595.xxx. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2310301

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlets incorporate a plastic aerator and some of the models are supplied with lever type pop-up wastes.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2310301
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connections.
Marking:
Grohe Spa on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2028
Model:
23.076 000 – Allure L size (without pop-up waste), 32.249 000 – Allure XL (with pop-up waste).
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2311345

Range of wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, dome type operating member and an self-cancelling to the shower outlet. The temperature is controlled independently via a thermostatic cartridge, with manual override button. The spout outlets incorporate plastic aerators and the inlets incorporating stainless steel strainers. Both inlets and shower outlet incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Shower hose and handset are not supplied with products. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2311345
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” x ¾” BSP (M) off-set union (34.567) or 3/4” BSP (F).
Marking:
Grohe on body.
Installation Requirements:
R001 R020
Expiry date:
30/11/2028
Model:
34.567 GROHTHERM 800, 34.568 GROHTHERM 800.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2311346

Range of wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating member and an self-cancelling to the shower outlet. The spout outlets incorporate plastic aerators. Shower outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Shower hose and handset are not supplied with products. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2311346
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” x ½” offset unions
Marking:
Grohe, Design & Engineering, Grohe Germany etched on Lever & Rear of body.
Installation Requirements:
R001 R020
Expiry date:
30/11/2028
Model:
23.726.003 – EUROSTYLE, 32.286.001 - WAVE 2015, 33.591.XX3 – EUROSTYLE. XX indicates a different surface finish, like following 00 = chrome LS = moon white

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2311347

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating ceramic cartridge headworks with single lever operating members and a self-cancelling to the shower outlet. The spout outlets incorporate plastic aerators. Shower outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Shower hose and handset are not supplied with products. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2311347
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) x ¾” BSP (M) offset union.
Marking:
Grohe etched on Lever.
Installation Requirements:
R001 R020
Expiry date:
30/11/2028
Model:
32.831 - EUROSMART COSMOPOLITAN, 32.831.AL0 EUROSMART COSMOPOLITAN, 32.831.GL0 - EUROSMART COSMOPOLITAN, 32.887 – GET. AL0 ending = brushed hard graphite finish / GL0 ending = cool sunrise finish

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240504013

Range of deck mounted, Infra-red electronic basin mixers with mixing device and adjustable temperature limiter. The tap incorporates EPDM O-rings. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240504013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP (F) captive nut flexi hose
Marking:
Grohe etched on top of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
36.440.XXX - Eurocube E & 36.441.XXX – Eurocube E. 'XXX' denotes the finish and is replaced with: 000 = chrome, DC0 = supersteel & AL0 = brushed hard graphite.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#23113748

Overhead ceiling or wall mounted (depending on shower arm) shower outlet with chrome plated plastic body, EPDM o-rings and a plastic flow restrictor at the ball joint. Maximum working pressure: Open outlet. Maximum operating temperature: 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
23113748
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) – inlet to shower arm. ½” BSP (M) – inlet to showerhead.
Marking:
Grohe logo on shower outlet.
Installation Requirements:
R001 R010
Expiry date:
30/11/2028
Model:
26.054 Rainshower Allure 230. The showerhead can be installed together with either of the following shower arms: 27.709 Rainshower Grohe shower arm (wall), 27.711 Rainshower Grohe shower arm (ceiling).

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240902703

Filter cartridge with a plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1055 Filter Cartridges
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP male
Marking:
Grohe Blue on adhesive label on body.
Installation Requirements:
R001 R008 R120 R150 R170 R290
Expiry date:
30/09/2029
Model:
40547001 Grohe Blue AC Cartridge Single
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#241102010

Five-hole, single outlet (fixed) combination tap assembly (brass body with various finishes – see models), incorporating quarter turn ceramic disc headworks with dome type operating members and a self-cancelling diverter to shower outlet. The product is supplied with stainless steel braided, PEX lined interconnecting flexible hose assemblies. The shower handset incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Multi hole tap(s) with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).
WRAS Approval Number:
241102010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, silicone lined flexible hose assemblies with 3/4" BSP captive nut end connections.
Marking:
Grohe Spa logo on spout.
Installation Requirements:
R001 R006 R007 R009 R010 R030
Expiry date:
30/11/2029
Model:
25.226.xxx. Where xxx denotes finish, can be replaced by: 000 – Chrome, DC0 – Supersteel, DA0 – Warm sunset, AL0 – Brushed hard graphite, A00 – hard graphite, BE0 – polished nickel, DL0 – brushed warm sunset, EN0 – brushed nickel, GN0 – brushed cool sunrise, GL0 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#241104020

Range of two-hole, single outlet (fixed) combination tap assemblies with chromium plated brass bodies, incorporating quarter turn ceramic disc headworks with single lever operation members and a self-cancelling diverter to shower outlet. Products are supplied with metal backnuts, shower handsets and shower hoses, with spout outlets incorporating plastic aerators. The shower outlets also incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
241104020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M).
Marking:
Grohe on body & handset.
Installation Requirements:
R001 R006 R030
Expiry date:
30/11/2029
Model:
25 282 001 - BauEdge. 25 284 000 - Get. 25 285 001 - StartEdge.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#241202040

Range of wall mounted, concealed thermostatic shower valves (plastic bodies),2 way or 3 way function incorporating push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241202040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with Grohe rough kit 35.600 or 35.5604 which has 1/2" BSP (F) inlets and outlets
Marking:
Grohe logo on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/12/2029
Model:
29.507.xxx 29.508.xxx Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604 Where xxx denotes finish, can be replaced by: 000 – Chrome KF0 – phantom black
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250102014

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes) incorporating a ceramic cartridge headworks with single lever operating members. Model 24.341.xxx is supplied with lever operated pop up waste (not verified by test). Maximum working pressure 10 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250102014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.
Marking:
Grohe SPA logo on front of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2030
Model:
24.341.xxx 24.342.xxx Xxx denotes finish: 000 – chrome DC0 – supersteel AL0 – brushed hard graphite
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250102015

Range of wall mounted spout outlets (brass bodies - various plated) incorporating a plastic aerator. Maximum operating temperature: 60 °C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
250102015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Grohe Logo on spout body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
13.485.xxx 13.486.xxx Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel AL0 – Brushed hard graphite A00 – Hard graphite
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250102018

Concealed, wall mounted, manual shower blending valve incorporating a brass body (various finishes) with ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60 °C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250102018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Grohe logo on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
24.334.xx1 32.742.xx1 29.078.xx1 where xx1 denotes finish, can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 8

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.