Range of compression fitting with brass and DZR brass bodies, supplied with brass compression rings. For use with copper tube (manufactured to BS EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Marking: Conex Sanbra & size on body. DZR brass models also have CR on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Model: Conex Compression range. 303 D021020303- - 12 x 3/8” D031020303- - 12 x ½” E021020303- - 15 x 3/8” E031020303- - 15 x ½” E041020303- - 15 x ¾” E051020303- - 15 x 1” F031020303- - 18 x ½” F041020303- - 18 x ¾” G031020303- - 22 x ½” G041020303- - 22 x ¾” G051020303- - 22 x 1” H051020303- - 28 x 1” H061020303- - 28 x 1-1/4” B015020303 - 8 x ¼” B025020303 - 8 x 3/8” B035020303 - 8 x ½” C015020303 – 10 x ¼” C025020303 – 10 x 3/8” C035020303 – 10 x ½” D025020303 – 12 x 3/8” D035020303 – 12 x ½” E025020303 – 15 x 3/8” E035020303 – 15 x ½” E045020303 – 15 X ¾” F035020303 – 18 x ½” F045020303 – 18 x ¾” G045020303 – 22 x ¾” G055020303 – 22 x 1” H045020303 – 28 x ¾” H055020303 – 28 x 1” J055020303 – 35 x 1” J065020303 – 35 x 1-1/4” K075020303 – 42 x 1-1/2” N085020303 – 54 x 2” 303SF E031020303SF – 15 x ½” G041020303SF – 22 x ¾” E035020303SF – 15 x ½” E045020303SF – 15 x ¾” G045050303SF – 22 x ¾” 303ST E031020303ST – 15MM E041020303ST – 15MM G041020303ST – 22MM 321 E- - 1020321- - 15MM G- - 1020321- - 22MM H- - 1020321- - 28MM J- - 1020321- - 35MM K- - 5020321- - 42MM N- - 5020321- - 54MM 323 D- - 1020323- - 12MM E- - 1020323- - 15MM G- - 1020323- - 22MM H- - 1020323- - 28MM B- - 5020323- - 8MM C- - 5020323- - 10MM D- - 5020323- - 12MM E- - 5020323- - 15MM F- - 5020323- - 18MM G- - 5020323- - 22MM H- - 5020323- - 28MM J- - 5020323- - 35MM K- - 5020323- - 42MM N- - 5020323- - 54MM 401 DD-1020401- - 12MM EE-1020401- - 15MM FF-1020401- - 18MM GG-1020401- - 22MM HH-1020401- - 28MM JJ-1020401- - 35MM KK-1020401- - 42MM NN-1020401- - 54MM BB-5020401- - 8MM CC-5020401- - 10MM DD-5020401- - 12MM EE-5020401- - 15MM FF-5020401- - 18MM GG-5020401- - 22MM HH-5020401- - 28MM JJ-5020401- - 35MM KK-5020401- - 42MM 401R ED-1020401- - 15x12MM GE-1020401- - 22x15MM DC-5020401- - 12x10MM EC-5020401- - 15x10MM GE-5020401- - 22x15MM HG-5020401- - 28x22MM 401DA EE-1020401DA – 15MM GG-1020401DA – 22MM HH-1020401DA – 28MM 401/O EE-1020401/O – 15MM GG-1020401/O – 22MM HH-1020401/O – 28MM S401S EE-5020401S- 15MM GG-5020401S – 22MM HH-5020401S – 28MM 401V EE-1020401V- 15MM GG-1020401V – 22MM 402 E031020402- - 15 x ½” E041020402- - 15 x ¾” F031020402- - 18 x ½” G041020402- - 22 x ¾” G051020402- - 22 x 1” H041020402- - 28 x ¾” H051020402- - 28 x 1” B015020402- - 8 x ¼” C025020402- - 10 x 3/8” C035020402- - 10 x ½” D025020402- - 12 x 3/8” D035020402- - 12 x ½” E025020402- - 15 x 3/8” E035020402- - 15 x ½” E045020402- - 15 x ¾” F035020402- - 18 x ½” F045020402- - 18 x ¾” G035020402- - 22 x ½” G045020402- - 22 x ¾” H055020402- - 28 x 1” J065020402- - 35 x 1-1/4” K075020402- - 42 x 1-1/2” 402PCB E031020402CB – 15 x ½” x 38MM G041020402CB – 22 x ½” x 38MM 402TA – D021020402TA – 12 x 3/8” D031020402TA – 12 x ½” E021020402TA – 15 x 3/8” E031020402TA – 15 x ½” E041020402TA – 15 x ¾” F041020402TA – 18 x ¾” G041020402TA – 22 x ¾” G051020402TA – 22 x 1” H051020402TA – 28 x 1” 403 D031020403- - 12 X ½” E031020403- - 15 x ½” E041020403- - 15 x ¾” F031020403- - 18 x ½” F041020403- - 18 x ¾” G031020403- - 22 x ½” G041020403- - 22 x ¾” G051020403- - 22 x 1” H041020403- - 28 x ¾” H051020403- - 28 x 1” K071020403- - 42 x 1-1/2” B015020403- - 8 x ¼” C025020403- - 10 x 3/8” C035020403- - 10 x ½” D025020403- - 12 x 3/8” D035020403- - 12 x ½” E025020403- - 15 x 3/8” E035020403- - 15 x ½” E045020403- - 15 x ¾” F045020403- - 18 x ¾” G035020403- - 22 x ½” G045020403- - 22 x ¾” H055020403- - 28 x 1” J065020403- - 35 x 1-1/4” 403SF E031020403SF – 15 x ½” G031020403SF – 22 x ½” G041020403SF – 22 x ¾” E035020403SF – 15 x ½” 403W E031020403W- 15 x ½” E035020403W- 15 x ½” 403WL E031020403WE – 15 x ½” E031020403WL – 15 x ½” G031020403WL – 22 x ½” C035020403WL – 10 x ½” D035020403WL – 12 x ½” E035020403WL – 15 x ½” G045020403WL – 22 x ¾” 601EQ DDD1020601EQ – 12MM EEE1020601EQ – 15MM FFF1020601EQ – 18MM GGG1020601EQ – 22MM HHH1020601EQ – 28MM BBB5020601EQ – 8MM CCC5020601EQ – 10MM DDD5020601EQ – 12MM EEE5020601EQ – 15MM FFF5020601EQ – 18MM GGG5020601EQ – 22MM HHH5020601EQ – 28MM JJJ5020601EQ – 35MM KKK5020601EQ – 42MM 601RB GGE1020601- - 22 x 22 x 15MM HHE1020601- - 28 x 28 x 15MM HHG1020601- - 28 x 28 x 22MM NNE1020601- - 54 x 54 x 15MM NNG1020601- - 54 x 54 x 22MM NNH1020601- - 54 x 54 x 28MM DDC5020601- - 12 x 12 x 10MM EEC5020601- - 15 x 15 x 10MM EED5020601- - 15 x 15 x 12MM FFD5020601- - 18 x 18 x 12MM FFE5020601- - 18 x 18 x 15MM GGD5020601- - 22 x 22 x 12MM GGE5020601- - 22 x 22 x 15MM GGF5020601- - 28 x 28 x 18MM HHE5020601- - 28 x 28 x 15MM HHG5020601- - 28 x 28 x M22M JJE5020601- - 35 x 35 x 15MM JJG5020601- - 35 x 35 x 22MM JJH5020601- - 42 x 42 x 28MM KKE5020601- - 42 x 42 x 15MM KKG5020601- - 42 x 42 x 22MM KKH5020601- - 42 x 42 x 28MM KKJ5020601- - 42 x 42 x 35MM 601RE GEG1020601- - 22 x 15 x 22MM HEH1020601- - 28 x 15 x 28MM GEG5020601- - 22 x 15 x 22MM HGH5020601- - 28 x 22 x 28MM 601REB GEE1020601- - 22 x 15 x 15MM EDD5020601- - 15 x 12 x 12MM GEE5020601- - 22 x 15 x 15MM HGG5020601- - 28 x 22 x 22MM 601REE EEG1020601- - 15 x 15 x 22MM GGH5020601- - 22 x 22 x 28MM 615 EE35020615- - 15 x 15 x ½” GG35020615- - 22 x 22 x ½” GG45020615- - 22 x 22 x ¾” 617 EE11020617- - 15 x 15 x ¼” Ee31020317- - 15 x 15 x ½” EE41020617- - 15 x 15 x ¾” FF31020617- - 18 x 18 x ½” GG31020617- - 22 x 22 x ½” GG51020617- - 22 x 22 x 1” HH41020617- - 28 x 28 x ¾” DD2502617- - 12 x 12 x 3/8” DD3502617- - 12 x 12 x ½” EE3502617- - 15 x 15 x ½” GG3502617- - 22 x 22 x ½” GG4502617- - 22 x 22 x ¾” HH3502617- - 28 x 28 x ½” HH5502617- - 28 x 28 x 1” EE3502617W- - 15 x 15 x ½” GG3502617W- - 22 x 22 x ½” E3E502631- - 15 x ½” x 15MM G4G502631- - 22 x ¾” x 22MM 631 G4G1020631 – 22 x ¾” x 22MM 645 33E1020645- - 22 x ¾” x 22MM 684 G3G1020684 – 22 x ½” x 22MM G4G1020684 – 22 x ¾” X 22MM E3E5020684- - 15 x ½” x 15MM 901 GGGG1020901 – 22 x 22 x 22 x 22MM 301 DD-1020301- - 12MM TT-1020301- - 14MM EE-1020301- - 15MM UU-1020301- - 16MM FF-1020301- - 18MM VV-1020301- - 20MM GG-1020301- - 22MM HH-1020301- - 28MM JJ-1020301- - 35MM 301BH EE-1020301BH – 15mm 301BP DZB1020301BP – 12mm EZB1020301BP – 15mm GZB1020301BP – 22mm 301CO EE5020301CO – 15mm GG5020301CO – 22mm 301DA EE-1020301DA – 15mm GG-1020301DA – 22mm 301V EE-1020301V- 302 D011020302 – 12 x ¼” D021020302 – 12 x -3/8” D031020302 – 12 x ½” E011020302 – 15 x 1/4” E021020302 – 15 x 3/8” E031020302 – 15 x ½” E041020302 – 15 x ¾” F031020302 – 18 x ½” F041020302 – 18 x ¾” G031020302 – 22 x ½” G041020302 – 22 x ¾” G051020302 – 22 x 1” H051020302 – 28 x 1” H061020302 – 28 x 1-1/4” J061020302 – 35 x 1-1/4” K071020302 – 42 x 1-1/2” N081020302 – 54 X 2” 302B E031020302B – 15 x ½” G041020302B- 22 x ¾” H051020302B – 28 x 1” J061020302B – 35 x 1-1/4” K071020302B- 42 x 1-1/2” N081020302B – 54 x2” 302CB E031020302CB – 15 x ½” G041020302CB – 22 x ¾” 302TA D021020302TA – 12 x 3/8” D031020302TA – 12 x ½” T031020302TA – 14 x ½” E021020302TA – 15 x 3/8” E031020302TA – 15 x ½” E041020302TA – 15 x ¾” U031020302TA – 16 x ½” U041020302TA – 16 x ¾” F031020302TA – 18 x ½” F041020302TA – 18 x ¾” G031020302TA – 22 x ½” G041020302TA – 22 x ¾” G051020302TA – 22 x 1” H041020302TA – 28 x ¾” H051020302TA – 28 x 1” 401 ED-1020401 - - 15 x 12mm GE-1020401- - 22 x 15mm 403WE E031020403WE – 15 x ½” 601C EEE5020601C- 15mm GGG5020601C- 22mm

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101811

Size:

SEE MODEL

Marking:

Conex >B< logo and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupler Straight Coupler 8mm 5270 008000000 10mm 5270 010000000 12mm 5270 012000000 15mm 5270 015000000 22mm 5270 022000000 28mm 5270 028000000 35mm 5270 035000000 42mm 5270 042000000 ,54mm 5270 054000000 67mm 5270 067000000 76mm 5270 076000000 108mm 5270 108000000 Slip Coupler Slip Coupler 15mm 5270S015000000 22mm 5270S022000000 28mm 5270S028000000 35mm 5270S035000000 42mm 5270S042000000 54mm 5270S054000000 Reducing Coupler Reducing Coupler 10mmX8mm 5240 010008000 15mmX8mm 5240 015008000 15mmX10mm 5240 015010000 15mmX12mm 5240 015012000 22mmX15mm 5240 022015000 28mmX15mm 5240 028015000 28mmX22mm 5240 028022000 35mmX15mm 5240 035015000 35mmX22mm 5240 035022000 35mmX28mm 5240 035028000 42mmX22mm 5240 042022000 42mmX28mm 5240 042028000 42mmX35mm 5240 042035000 54mmX15mm 5240 054015000 54mmX22mm 5240 054022000 54mmX28mm 5240 054028000 54mmX35mm 5240 054035000 54mmX42mm 5240 054042000 Fitting Reducer Fitting Reducer 10mmX8mm 5243 010008000 12mmX8mm 5243 012008000 15mmX8mm 5243 015008000 15mmX10mm 5243 015010000 15mmX12mm 5243 015012000 22mmX15mm 5243 022015000 28mmX15mm 5243 028015000 28mmX22mm 5243 028022000 35mmX15mm 5243 035015000 35mmX22mm 5243 035022000 35mmX28mm 5243 035028000 42mmX15mm 5243 042015000 42mmX22mm 5243 042022000 42mmX28mm 5243 042028000 42mmX35mm 5243 042035000 54mmX15mm 5243 054015000 54mmX22mm 5243 054022000 54mmX28mm 5243 054028000 54mmX35mm 5243 054035000 54mmX42mm 5243 054042000 67mmX28mm 5243 067028000 67mmX35mm 5243 067035000 67mmX42mm 5243 067042000 67mmX54mm 5243 067054000 76mmX35mm 5243 076035000 76mmX42mm 5243 076042000 76mmX54mm 5243 076054000 76mmX67mm 5243 076067000 108mmX54mm 5243 108054000 108mmX67mm 5243 108067000 108mmX76mm 5243 108076000 End cap End Cap 10mm 5301 010000000 8mm 5301 008000000 15mm 5301 015000000 22mm 5301 022000000 28mm 5301 028000000 35,35mm 5301 035000000 42mm 5301 042000000 54mm 5301 054000000 Equal Tee Equal Tee 8mm 5130 008008008 10mm 5130 010010010 12mm 5130 012012012 15mm 5130 015015015 22mm 5130 022022022 28mm 5130 028028028 35mm 5130 035035035 42mm 5130 042042042 54mm 5130 054054054 67mm 5130 067067067 76mm 5130 076076076 108mm 5130 108108108 Partial Crossover Partial Crossover 15mm 5086 015000000 22mm 5086 022000000 Full crossover Full crossover 15mm 5085 015000000 22mm 5085 022000000 Imperial coupler Imperial coupler 15mmX1/2" 5241 015004000 22mmX3/4" 5241 022006000 28mmX1" 5241 028008000 90° Elbow 90° Elbow 8mm 5090 008000000 10mm 5090 010000000 15mm 5090 015000000 22mm 5090 022000000 28mm 5090 028000000 35mm 5090 035000000 42mm 5090 042000000 54mm 5090 054000000 67mm 5090 067000000 76mm 5090 076000000 108mm 5090 108000000 90° Street Elbow 90° Street Elbow 10mm 5092 010000000 15mm 5092 015000000 22mm 5092 022000000 28mm 5092 028000000 35mm 5092 035000000 42mm 5092 042000000 44mm 5092 054000000 45° Elbow 45° Elbow 15mm 5041 015000000 22mm 5041 022000000 28mm 5041 028000000 35mm 5041 035000000 42mm 5041 042000000 54mm 5041 054000000 67mm 5041 067000000 76mm 5041 076000000 108mm 5041 108000000 45° Street Elbow 45° Street Elbow 15mm 5040 015000000 22mm 5040 022000000 28mm 5040 028000000 35mm 5040 035000000 42mm 5040 042000000 54mm 5040 054000000 Reducing Tee (LXRXM) Reducing Tee 15mmX15mmX10mm 5130 015010015 15mmX15mmX12mm 5130 015012015 22mmX22mmX15mm 5130 022015015 28mmX28mmX15mm 5130 028028015 28mmX28mmX22mm 5130 028028022 35mmX35mmX15mm 5130 035015035 35mmX35mmX22mm 5130 035022035 35mmX35mmX28mm 5130 035028035 42mmX42mmX15mm 5130 042015042 42mmX42mmX22mm 5130 042022042 42mmX42mmX28mm 5130 042028042 42mmX42mmX35mm 5130 042035042 54mmX54mmX15mm 5130 054015054 54mmX54mmX22mm 5130 054022054 54mmX54mmX28mm 5130 054028054 54mmX54mmX35mm 5130 054035054 54mmX54mmX42mm 5130 054042054 67mmX67mmX28mm 5130 067028067 67mmX67mmX35mm 5130 067035067 67mmX67mmX42mm 5130 067042067 67mmX67mmX54mm 5130 067054067 76mmX76mmX28mm 5130 076028076 76mmX76mmX35mm 5130 076035076 76mmX76mmX42mm 5130 076042076 76mmX76mmX54mm 5130 076054076 76mmX76mmX67mm 5130 076067076 108mmX108mmX54mm 5130 108054108 108mmX108mmX67mm 5130 108067108 108mmX108mmX76mm 5130 108076108 Reducing Tee Reducing Tee 22mmX15mmX22mm 5130 022022015 28mmX15mmX28mm 5130 028028015 28mmX22mmX28mm 5130 028028022 35mmX28mmX35mm 5130 035035028 Reducing Tee Reducing Tee 15mmX15mmX22mm 5130 015022015 22mmX22mmX28mm 5130 022028022 Straight Tap connector (With Gasket) Straight Tap Connector 15mmX1/2" 5240G015004000 15mmX3/4" 5240G015006000 22mmX3/4" 5240G022006000 Bent tap connector (with Gasket) Bent tap connector 15mmX1/2" 5002G015004000 15mmX3/4" 5002G015006000 22mmX3/4" 5002G022006000

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

TP range of capillary solder ring copper fittings for use with copper tube EN1057, for above ground use only. Maximum working pressure: 25.0 bar. Maximum operating temperature: 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404065

Size:

see models

Marking:

TPX & size etched on body

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLER TP0108 8mm, TP0110 10mm, TP0112 12mm, TP0115 15mm, TP0122 22mm, TP0128 28mm, TP0135 35mm, TP0142 42mm, TP0154 54mm. SLIP COUPLER TP01S15 15mm, TP01S22 22mm, TP01S28 28mm, REDCUED COUPLER TP01R1008 10mm x 8mm, TP01R1508 15mm x 8mm, TP01R1510 15mm x 10mm, TP01R1512 15mm x 12mm, TP01R2210 2mm x 10mm, TP01R2215 22mm x 15mm, TP01R2815 28mm x 15mm, TP01R2822 28mm x 22mm, TP01R3522 35mm x 22mm, TP01R3528 35mm x 28mm, TP01R4235 42mm x 35mm, TP01R5442 54mm x 42mm. 90° Elbow TP1208 8mm, TP1210 10mm, TP1212 12mm, TP1215 15mm, TP1222 22mm, TP1228 28mm, TP1235 35mm, TP1242 42mm, TP1254 54mm. STREET ELBOW TP12S15 15mm, TP12S22 22mm, TP12S28 28mm, 45° ELBOW TP2115 15mm, TP2122 22mm, TP2128 28mm, TP2135 35mm, TP2142 42mm, TP2154 54mm. FITTING REDUCER TP061008 10mm x 8mm, TP061508 15mm x 8mm, TP061510 15mm x 10mm, TP061512 15mm x 12mm, TP062212 22mm x 12mm, TP062215 22mm x 15mm, TP062815 28mm x 15mm, TP062822 28mm x 22mm, TP063515 35mm x 15mm, TP063522 35mm x 22mm, TP063528 35mm x 28mm, TP064215 42mm x 15mm, TP064222 42mm x 22mm, TP064228 42mm x 28mm, TP064235 42mm x 35mm, TP065415 54mm x 15mm, TP065422 54mm x 22mm, TP065428 54mm x 28mm, TP065435 54mm x 35mm, TP065442 54mm x 42mm STOP END 10mm, TP6110 12mm, TP6112 15mm, TP6115 22mm, TP6122 28mm, TP6128 35mm, TP6135 42mm, TP6142 54mm. TP6154 EQUAL TEE TP2408 8mm, TP2410 10mm, TP2412 12mm, TP2415 15mm, TP2422 22mm, TP2428 28mm, TP2435 35mm, TP2442 42mm, TP2454 54mm TEE - REDUCED BOTH ENDS TP25222215 22mm x 22mm x 15mm, TP25282815 28mm x 28mm x 15mm, TP25282822 28mm x 28mm x 22mm, TP25353515 35mm x 35mm x 15mm, TP25353522 35mm x 35mm x 22mm, TP25353528 35mm x 35mm x 28mm, TP25424215 42mm x 42mm x 15mm, TP25424222 42mm x 42mm x 22mm, TP25424228 42mm x 42mm x 28mm, TP25424235 42mm x 42mm x 35mm, TP25545415 54mm x 54mm x 15mm, TP25545422 54mm x 54mm x 22mm, TP25545428 54mm x 54mm x 28mm, TP25545435 54mm x 54mm x 35mm, TP25545442 54mm x 54mm x 42mm,

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of ‘B’ Press XL copper crimped fittings with EPDM ‘O’-rings for use with copper pipe to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models Below

Marking:

>‘B’<, Size and DVGW

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

P5001 90° Street Bend P5001 06400000 – 64MM P5001 06700000 – 67MM P5001 07600000 – 76MM P5001 08900000 – 89MM P5001 10800000 – 108MM P5002 90° Bend P5002 06400000 – 64MM P5002 06700000 – 67MM P5002 07600000 – 76MM P5002 08900000 – 89MM P5002 10800000 – 108MM P5040 45° Obtuse Street Elbow P5040 06400000 – 64MM P5040 06700000 – 67MM P5040 07600000 – 76MM P5040 08900000 – 89MM P5040 10800000 – 108MM P5041 45° Obtuse Elbow P5041 06400000 – 64MM P5041 06700000 – 67MM P5041 07600000 – 76MM P5041 08900000 – 89MM P5041 10800000 – 108MM P5130 Equal Tee P5130 06400000 – 64MM P5130 06700000 – 67MM P5130 07600000 – 76MM P5130 08900000 – 89MM P5R 108108108 – 108MM P5130G Tee with Female Branch P5130G06406640 – 64 x ¾” BSP x 64MM P5130G06408640 – 64 x 1” BSP X 64MM P5130G06416640 – 64 x 2” BSP X 64MM P5130G06706670 – 67 x ¾” BSP x 67MM P5130G06716670 – 67 x 2” BSP x 67MM P5130G07606760 – 76 x ¾” BSP x 76MM P5130G07616760 – 76 x 2” BSP x 76MM P5130G08906890 – 89 x ¾” BSP x 89MM P5130G08916890 – 89 x 2” BSP x 89MM P5RG108061080 – 108 x ¾” BSP x 108MM P5RG108161080 – 108 x 2” BSP x 108MM P5130RB Tee Reduced Branch P5130 06435640 – 64 x 35 x 64MM P5130 06442650 – 64 x 42 x 64MM P5130 06454640 – 64 x 54 x 64MM P5130 06728670 – 67 x 28 x 67MM P5130 06735670 – 67 x 35 x 67MM P5130 06742670 – 67 x 42 x 67MM P5130 06754670 – 67 x 54 x 67MM P5130 07628760 – 76 x 28 x 76MM P5130 07635760 – 76 x 35 x 76MM P5130 07642760 – 76 x 42 x 76MM P5130 07654760 – 76 x 54 x 76MM P5130 07664760 – 76 x 64 x 76MM P5130 07667760 – 76 x 67 x 76MM P5130 08954890 – 89 x 54 x 89MM P5130 08964890 – 89 x 64 x 89MM P5130 08976890 – 89 x 76 x 89MM P5R 0108054108 – 108 x 54 x 108MM P5R 0108064108 – 108 x 64 x 108MM P5R 0108076108 – 108 x 76 x 108MM P5R 0108089108 – 108 x 89 x 108MM P5230B Flange 45° P5230B06400000 – 64MM P5230B06700000 – 67MM P5230B07600000 – 76MM P5230 076000UK – 76MM P5230B08900000 – 89MM P5230B10800000 – 108MM P5243 Fitting Reducer P5243 06435000 – 64 x 35MM P5243 06442000 – 64 x 42MM P5243 06454000 – 64 X 54MM P5243 06728000 – 67 x 28MM P5243 06735000 – 67 x 35MM P5243 06742000 – 67 x 42MM P5243 06754000 – 67 x 54MM P5243 07628000 – 76 x 28MM P5243 07635000 – 76 x 35MM P5243 07642000 – 76 x 42MM P5243 07654000 – 76 x 54MM P5243 07664000 – 76 x 64MM P5243 07667000 – 76 x 67MM P5243 08954000 – 89 x 54MM P5243 08964000 – 89 x 64MM P5243 08976000 – 89 x 76MM P5243 10854000 – 108 x 54MM P5243 10864000 – 108 x 64MM P5243 10876000 – 108 x 76MM P5243 10889000 – 108 x 89MM P5243G Male Threaded Straight Connector P5243G064200000 – 64 x 2-1/2” BSP P5243G067200000 – 67 x 2-1/2” BSP P5243G076200000 – 76 x 2-1/2” BSP P5243G076024000 – 76 x 3” BSP P5243G089240000 – 89 x 3” BSP P5243G10832000 – 108 X 4” BSP P5270 Straight Connector P5270 06400000 – 64MM P5270 06700000 – 67MM P5270 07600000 – 76MM P5270 08900000 – 89MM P5270 10800000 – 108MM P5270G Female Threaded Straight Connector P5270G06420000 – 64 x 2-1/2” BSP P5270G06720000 – 67 x 2-1/2” BSP P5270G07620000 – 76 x 2-1/2” BSP P5270G07624000 – 76 x 3” BSP P5270G08924000 – 89 x 3” BSP P5270G10832000 – 108 x 4” BSP P5275 Repair Coupling P5275 06400000 – 64MM P5275 06700000 – 67MM P5275 07600000 – 76MM P5275 08900000 – 89MM P5275 10800000 – 108MM P5301 End Cap P5301 06400000 – 64MM P5301 06700000 – 67MM P5301 07600000 – 76MM P5301 08900000 – 89MM P5301 10800000 – 108MM

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250102006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm.

Marking:

A (manufacturers logo) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

<A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use (sizes 12mm-54mm only. 66.7mm, 76.1mm, 88.9mm & 108mm for above ground use only) Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107342

Size:

12mm - 108mm.

Marking:

<A> logo, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Press fitting-elbow 90° 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5002 0150000 APW5002 0220000 APW5002 0280000 APW5002 0350000 APW5002 0420000 APW5002 0540000: Press fitting-elbow 90°FTGXC MP5092:15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5092 0150000 APW5092 0220000 APW5092 0280000 APW5092 0350000 APW5092 0420000 APW5092 0540000 Press fitting-elbow 45° CXC APW5041: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5041 0150000 APW5041 0220000 APW5041 0280000 APW5041 0350000 APW5041 0420000 APW5041 0540000 Press fitting-elbow 45°FtgxC APW5040 : 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5040 0150000 APW5040 0220000 APW5040 0280000 APW5040 0350000 APW5040 0420000 APW5040 0540000 Press fitting-crossover CXC MP5085: 15mm, 22mm, 28mm APW5085 0150000 APW5085 0220000 APW5085 0280000 Press fitting-crossover FTGXC APW5086: 15mm, 22mm, 28mm APW5086 0150000 APW5086 0180000 APW5086 0220000 Press fitting-Straight Coupling APW5270: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5270 0150000 APW5270 0220000 APW5270 0280000 APW5270 0350000 APW5270 0420000 APW5270 0540000 Press fitting-equal tee APW5130: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5130 0151515 APW5130 0222222 APW5130 0282828 APW5130 0353535 APW5130 0424242 APW5130 0545454 Press fitting-reducing Tee APW5130R 15x15x22mm APW5130 0151522 22x15x15mm APW5130 0221515 22x15x22mm APW5130 0221522 22x22x15mm APW5130 0222215 22x22x28mm APW5130 0222228 28x15x15mm APW5130 0281515 28x15x22mm APW5130 0281522 28x22x15mm APW5130 0282215 28x22x22mm APW5130 0282222 28x22x28mm APW5130 0282228 28x28x15mm APW5130 0282815 28x28x22mm APW5130 0282822 28x28x35mm APW5130 0282835 35x22x22mm APW5130 0352222 35x22x35mm APW5130 0352235 35x28x22mm APW5130 0352822 35x28x28mm APW5130 0352828 35x28x35mm APW5130 0352835 35x35x15mm APW5130 0353515 35x35x22mm APW5130 0353522 35x35x28mm APW5130 0353528 42x28x28mm APW5130 0422828 42x35x35mm APW5130 0423535 42x28x42mm APW5130 0422842 42x35x42mm APW5130 0423542 42x42x15mm APW5130 0424215 42x42x22mm APW5130 0424222 42X42X28mm APW5130 0424228 42X42X35mm APW5130 0424235 54X54X15mm APW5130 0545415 54X54X28mm APW5130 0545428 54X54X35mm APW5130 0545435 54X42X42mm APW5130 0544242 54X54X42mm APW5130 0545442 Press fitting-fitting reducer FTGXC APW5243 22x15mm APW5243 0221500 28x15mm APW5243 0281500 28x22mm APW5243 0282200 35x15mm APW5243 0351500 35x22mm APW5243 0352200 35x28mm APW5243 0352800 42x15mm APW5243 0421500 42x22mm APW5243 0422200 42x28mm APW5243 0422800 42x35mm APW5243 0423500 54x15mm APW5243 0541500 54x22mm APW5243 0542200 54x28mm APW5243 0542800 54x35mm APW5243 0543500 54x42mm APW5243 0544200 Press fitting- reduced Coupler CXC APW5240 22x15mm APW5240 0221500 28x15mm APW5240 0281500 28x22mm APW5240 0282200 35x15mm APW5240 0351500 35x22mm APW5240 0352200 35x28mm APW5240 0352800 42x15mm APW5240 0421500 42x22mm APW5240 0422200 42x28mm APW5240 0422800 42x35mm APW5240 0423500 54x15mm APW5240 0541500 54x22mm APW5240 0542200 54x28mm APW5240 0542800 54x35mm APW5240 0543500 54x42mm APW5240 0544200 Press fitting-end stop MP5301: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5301 0150000 APW5301 0220000 APW5301 0350000 APW5301 0420000 APW5301 0540000

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

Conex, size, pressure rating and flow arrow on body. Conex Universal & WRAS on metal dataplate on body

Installation Requirements:

R001

Expiry date:

31/08/2025

Model:

1804

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of brass bodied gate valve with PTFE gaskets with hand wheel operated mechanism. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250408012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Conex logo, size & pressure rating on body. Conex, pressure and technical information on disc on hand wheel.

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

112210RRW200404 1/2” BSP 112210RRW200606 3/4” BSP 112210RRW200808 1” BSP 112210RRW201010 1 1/4” BSP 112210RRW201212 1 1/2” BSP 112210RRW201616 2” BSP

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Zheijang IDC Fluid Control.

Company Name

Zheijang IDC Fluid Control.

General Email

View All Listings by this Company

Range of spherical valves with DZR brass bodies, chrome plated brass balls and PTFE seats. The products incorporate a lever type operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250408015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Conex, CR, PN rating and size on the body. Conex on lever.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

122050RRR400404 – ½” 122050RRR400606 – ¾” 122050RRR400808 – 1” 122050RRR401010 – 1 ¼” 122050RRR401212 – 1 ½” 122050RRR401616 – 2”

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of Y patterned strainers with a brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” to 2” BSP/BSPT (F) x (F)

Marking:

Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label.

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

IDC 180210 series comprising of model codes: 180210RR0160404 180210RR0160606 180210RR0160808 180210RR0161010 180210RR0161212 180210RR0161616 180210FF0160404 180210FF0160606 180210FF0160808 180210FF0161010 180210FF0161212 180210FF0161616

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Zheijang IDC Fluid Control.

Company Name

Zheijang IDC Fluid Control.

General Email

View All Listings by this Company