Caleffi S.p.A Approvals


#2007807

Solar range of auto air-vent valves (chromium plated brass) and a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2007807
Expiry date:
31/07/2025
Size:
See model
Marking:
Caleffi Solar, max temp & max pressure on body. Caleffi logo on cap.
Installation Requirements:
R001 R200 R535
Model:
250031 – 3/8” BSP (M) 250131SD – 3/8” BSP (M) 250131VLL – 3/8” BSP (M) 250131 – 3/8” BSP (M) 250131HRM – 3/8” BSP (M) 250041A – ½” NPTF 250041 – ½” BSP (M) 250831 – 3/8” BSP (M) 250931 - 3/8” BSP (M) 250133 - 3/8” BSP (M)
Factor:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491
General Email
info@caleffi.com

View All Listings by this Company

Print This Approval


#2009326

Range of pre-set (at 3.0 bar) pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm. The valve is fitted with hand operated rotating easing gear. Maximum operating temperature 85°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2009326
Expiry date:
30/09/2025
Note:
Closed circuit use only.
Size:
see model
Marking:
Caleffi logo, flow arrow, date of manufacture (MM/YY) & size on body. Pressure & temperature on cap. Some (but not all) models are marked with ‘CR.
Installation Requirements:
R001 R200
Model:
A312400 CST: 17.5mm manifold x ½” BSP (M). A312401 CST: 19.87mm manifold x ½” BSP (F). A312414 CST: 20mm manifold x ½” BSP (M). A312420 CST: 20mm manifold x 22mm compression. A312430 CST: ½” BSP manifold x ½” BSP (F). A312438 CST: 19.88mm manifold x ½” BSP (M). A312439 CST: fast fit manifold connection - 19.95mm. A314402 CST: 15mm manifold x ½” BSP (M). A314437 CST: ½” BSP (M) BSP x 15mm compression. A314402 BSC: 15mm manifold x ½” BSP (M).
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2007376

Cold water inlet control group with a DZR brass body consisting of a pressure reducing valve, (adjustable between 2.7 and 3.3 bar, but factory set at 3.0 bar), a stainless steel strainer and a plastic bodied pressure relief valve (pre-set at 8.0 bar). The product incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2007376
Expiry date:
31/07/2025
Size:
22mm compression
Marking:
Caleffi, CR and flow arrow on body.
Installation Requirements:
R001 R120
Model:
533121H CST
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2009331

Range of indirect heat interface units providing heating and instantaneous hot water. The hot water and space heating is provided via two separate plate heat exchangers. The space heating circuit incorporates an expansion vessel and expansion relief valve (set @ 3.0 bar). The primary circuit only is supplied with isolation valves on the flow and return. Maximum working pressure primary 16.0 bar. Maximum working pressure space heating 2.5 bar. Maximum working pressure secondary hot water (DHW) 10.0 bar. Maximum operating temperature primary 75°C. Maximum operating temperature space heating 85°C. Maximum operating temperature secondary hot water (DHW) 65°C.

Section:
1350 Heat Exchangers
WRAS Approval Number:
2009331
Expiry date:
30/09/2025
Note:
Not supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Size:
Primary: 1” BSP (M). Secondary: ¾” BSP (M). DHW: ½” BSP (M).
Marking:
Caleffi on cover. Pressure, model, temperature and other technical information on inside cover.
Installation Requirements:
R001 R360
Model:
SATK30105 - 75kW - Indirect HIU. SATK30103 - 50kW - Indirect HIU.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2012308

Filling loop assembly, consisting of a stainless steel braided EPDM lined flexible hose, a lever operated brass spherical valve and a DZR brass double check valve assembly that incorporates a lever operated spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 23°C.

Section:
1015 Filling Loop
WRAS Approval Number:
2012308
Expiry date:
31/12/2025
Size:
15mm compression
Marking:
Caleffi logo, CR, and flow arrow on mould on double check valve assembly body Caleffi logo mould on isolation valve body
Installation Requirements:
R001
Model:
300600 300600 CST
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2101310

Range of ‘right hand’ or ‘left hand’ tempering valves having a plastic body incorporating a thermostatic element. The cold inlet incorporates a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2101310
Expiry date:
31/01/2026
Size:
½” BSP (M) x 22.30mm OD manifold connection.
Marking:
Caleffi logo on body.
Installation Requirements:
R001
Model:
H0007852 Right Hand Tempering Valve. H0008522 Left Hand Tempering Valve
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2012359

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C. Model added September 2021 (501500) has a maximum operating temperature of 120°C. All other models have a maximum operating temperature of 115°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2012359
Expiry date:
31/12/2025
Size:
See model
Marking:
Caleffi logo on body.
Installation Requirements:
R001 R200
Model:
Serie 502 Robocal: ⅜" BSP (M): 502430. 502430 CON. 502430 CST. 502431 BSC. 502434 CST. 502435 CST. 502533. 502533 FRT. 502533 RIF. 502533 TAK. 502934 CST. 502937 BSC. Art. 502 Robocal with flow valve: ¼" BSP (M): 502420. 502530. ⅜" BSP (M): 502530 TH. 502530 TH1. 502930 TH. Art. 502 Robocal Long: ⅜" BSP (M): 502630. 502630 CST. 502630 WLF. 502631 CST. 502635 CST. 502636 CST. 502638 CST. 502638 OEM. 502730. 502730 A. 502730 BSC. 502730 CST. 502730 GRN. 502730 NTR. 502822. ½" BSP (M): 502640. 502643A. 15mm compression: 502649. Art. 502 Minical ⅜": ⅜" BSP (M): 502030. 502030 CON. 502030 CST. 502031. 502034 CST. 502035 CST. 502036 CST. 502037 CST. 502037 VLL. 502037 WLF. 502038 CST. 502130. 502130 CST. 502130 ENC. 502130 FRT. 502130 GRN. 502130 TAK. 502130 TH. 502130 TH1. 502131. 502131 TH. 502132 DEC. 502133. 502134 DEC. 502135 RIF. 502231. 502231 CST. 502231 TH. 502232 TH. Art. 502 Minical ½" BSP (M): 502020 CST. 502040. 502040 CON. 502040 CST. 502040 MI. 502040A. 502041. 502041 MI. 502043. 502043 CST. 502043 IMM. 502043A. 502043A CST. 502046 IMM. 502140. 502140 ENC. 502140 FRT. 502141. 502142. 502144 ART. 502144 DEC. 502145 RIF. 502241. 502242 TH. 502243A. 502246 IMM. 502343A. ¾" BSP (M): 502050. 502051. 502052 CST. 1" BSP (M): 502060. 502061. Model added September 2021: ¾” BSP (F): 501500.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2104302

Range of T-type thermostatic mixing valves with chrome plated DZR brass body, EPDM’O’-rings and NBR/fibre galsets (except for 252100 CST model). Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104302
Expiry date:
30/04/2026
Size:
See model
Marking:
Caleffi and technical information printed on operating cap. Caleffi, CR and Caleffi Solar on body.
Installation Requirements:
R001 R010 R040 R120
Model:
252140: ½” BSP(M) 252150: ¾” BSP (M) 252154 BSC: ¾” BSP (M) 252100 CST: 1” BSP (M) without tail pieces.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2104319

Automatic air venting valve with brass bodies, stainless steel float and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 120°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104319
Expiry date:
30/04/2026
Size:
¾” BSP (F)
Marking:
Caleffi, Art 501, pressure and temperature on body
Installation Requirements:
R001
Model:
Series 501 Automatic Air Vent
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2103336

‘Series 116’ range of automatic thermal balancing valves (DZR Brass) with non-rising spindle headwork, brass disc and EPDM seals. Some models can be supplied with a thermometer (see model). The outlet of the 116144, 116154, 116244 & 116254 models (added January 2024) incorporate a check valve cartridge, verified by test (suitable for backflow protection against fluid category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2103336
Expiry date:
31/03/2026
Size:
See model
Marking:
Caleffi, CR, flow arrow and PN rating on body.
Installation Requirements:
R001
Model:
Series 116 balancing valves: 116140: ½” BSP (F). 116150: ¾” BSP (F). 116160: 1” BSP (F). 116170: 1 ¼” BSP (F). 116240: ½” BSP (F). 116250: ¾” BSP (F). 116260: 1” BSP (F). 116270: 1 ¼” BSP (F). 116415: 15mm compression. 116420: 22mm compression. 116440: ½” BSP (F). 116441: ½” BSP (F) with thermometer. 116450: ¾” BSP (F). Model added January 2024: 116451: ¾” BSP (F) with thermometer. 116144: ½” BSP (M). 116154: ¾” BSP (M). 116244: ½” BSP (M) with thermometer. 116254: ¾” BSP (M) with thermometer.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2103323

5 way manifold assembly with a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range between 1.0 and 6.0 bar and a safety relief valve set at 6.0 bar. The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 40°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2103323
Expiry date:
31/03/2026
Size:
22mm compression.
Marking:
Caleffi and DN on pressure relief valve nut. Flow arrow and CR mark on pressure relief valve. Caleffi logo, CR, pressure rating and flow arrow on safety relief valve cap.
Installation Requirements:
R001 R120
Model:
UV3 kit.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2106313

Range of temperature and pressure relief valves incorporating a DZR brass body & EPDM membrane. See model for maximum working pressure. Maximum operating temperature 90°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2106313
Expiry date:
30/06/2026
Size:
½” BSP(M) x 15mm compression ¾” BSP(M) x 15mm compression ¾” BSP(M) x 22mm compression
Marking:
Caleffi logo, CR & flow arrow on body. Markings added from January 2022: UK CA and body number '0086' on body
Installation Requirements:
R001
Model:
309470 - 7 bar 309470 CST (multipack) 7 bar 309473 CST (multipack) 7 bar 309474 CST (multipack) 7 bar Models added July 2022 309430 - 3 bar 309400 - 10 bar 309400 CST - 10 bar 309440 - 4 bar 309440 CST - 4 bar 309460 - 6 bar 309474 - 7 bar 309500 - 10 bar 309500 CST - 10 bar 309530 - 3 bar 309540 - 4 bar 309542 - 4 bar 309542 CST - 4 bar 309560 - 6 bar 309570 - 7 bar 309570 CST - 7 bar 308403 GLD - 10 bar 308403CST - 10 bar 308463 GLD - 6 bar 308463 CST - 6 bar 309404 CST - 10 bar 309403 CST - 10 bar 309483 CST - 8 bar 309463 GLD - 6 bar 309479 - 7 bar 309479 CST - 7 bar 309511 VIS 309572 CST - 7 bar 309508 CST - 10 bar 309576 CST - 7 bar Solar models: Chrome plated with orange cap. 309431 - 3 bar 309441 - 4 bar 309461 - 6 bar 309466 - 6 bar 309471 - 7 bar 309401 - 10 bar 309401 FRR - 10 bar 309495 CST 309543 - 4 bar 309531 - 3 bar 309541 - 4 bar 309561 - 6 bar 309571 - 7 bar 309501 - 10 bar 309501 FRR - 10 bar 308469 GLD - 6 bar 309405 - 10 bar 309405 CST - 10 bar 309435 - 3 bar 309445 - 4 bar 309445 CST - 4 bar 309465 - 6 bar 309475 - 7 bar 309475 CST - 7 bar 309505 - 10 bar 309505 CST - 10 bar 309535 - 3 bar 309545 - 4 bar 309547 - 4 bar 309547 CST - 4 bar 309565 - 6 bar 309575 - 7 bar 309575 CST - 7 bar 309579 CST - 7 bar Models Added in July 2023 309670 LTC - 7 Bar 309406 CST - 10 Bar Model added February 2024: 309508 BSC - 10 bar Added in February 2024 309407 CST – 10 bar 309407 VLL – 10 bar
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2106328

Robocheck-1 in-line single check valve assembly with a DZR brass body (brushed chrome). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2106328
Expiry date:
30/06/2026
Size:
15mm compression
Marking:
Caleffi logo, flow arrow and CR on body
Installation Requirements:
R001
Model:
Robocheck-1 303715
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2110307

Range of 5 way inlet control group assemblies with a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range between 2.7 and 3.3bar and a safety relief valve set at 8.0 bar. The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2) and strainer on the inlet Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2110307
Expiry date:
31/10/2026
Size:
22mm compression.
Marking:
Caleffi, Caleffi logo, size, CR and flow arrow on body
Installation Requirements:
R001 R120
Model:
H0003723 H0008504
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2110322

Range of 5 way inlet control group assembly incorporating a DZR brass body incorporating a pressure reducing valve, with an adjustable outlet pressure range of either 3.0 bar, 3.5 bar, or 6.0 bar and a safety relief valve set at either 6.0 bar or 8.0bar (depending on model). The product incorporates an inline single check valve cartridge after the balanced cold take off, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2110322
Expiry date:
31/10/2026
Size:
28mm compression
Marking:
Caleffi, Caleffi Logo, size, Flow arrowand CR cast on body
Installation Requirements:
R001 R120
Model:
535101H 535102H 535103H 535104H 535105H
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2201805

Range of pre-set, spring loaded, angled pressure relief valves with plastic body and EPDM diaphragm. The valves are fitted with rotary type easing gear . For maximum working pressure please refer to model. Maximum operating temperature 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2201805
Expiry date:
31/01/2027
Size:
SEE MODEL
Marking:
Caleffi logo, flow arrow and DN mould on body Date of manufacture (WWYY) and pressure printed on body Pressure printed on cap
Installation Requirements:
R001 R200
Model:
Series 253 ½” BSP (F) 253040 – Preset at 10.0 bar 253042 – Preset at 2.5bar 253043 – Preset at 3.0 bar 253044 – Preset at 4.0 bar 253046 – Preset at 6.0 bar 253048 – Preset at 8.0 bar 253040 TAK – Preset at 10.0 bar 253042 TAK – Preset at 2.5bar 253043 TAK – Preset at 3.0 bar 253643 VIS – Preset at 3.0 bar 253044 TAK – Preset at 4.0 bar 253046 TAK – Preset at 6.0 bar 253546 TXH – Preset at 6.0 bar 253048 TAK – Preset at 8.0 bar Series 253 ¾” BSP (F) 253050 – Preset at 10.0 bar 253052 – Preset at 2.5bar 253053 – Preset at 3.0 bar 253054 – Preset at 4.0 bar 253056 – Preset at 6.0 bar 253058 – Preset at 8.0 bar 253156 CST – Preset at 6.0 bar Series 2531 ½” BSP (F) 253140 CST – Preset at 10.0 bar 253140 – Preset at 10.0 bar 253142 – Preset at 2.5bar 253143 CST – Preset at 3.0 bar 253143 – Preset at 3.0 bar 253144 CST – Preset at 4.0 bar 253144 – Preset at 4.0 bar 253146 CST – Preset at 6.0 bar 253146 VIS – Preset at 6.0 bar 253148 CST – Preset at 8.0 bar 253148 – Preset at 8.0 bar 253246 CST – Preset at 6.0 bar Series 2531 ½” BSP (M) 253344 VIS – Preset at 4.0 bar 253346 CST – Preset at 6.0 bar 253346 VIS – Preset at 6.0 bar 253646 CST – Preset at 6.0 bar 253704 VIS – Preset at 4.0 bar Series 2534 ½” BSP (M) 253443 – Preset at 3.0 bar
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2109328

Range of water hammer arrestor’s incorporating brass bodies (various finishes). The 525152 model is supplied with a reinforced captive nut. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C. For products manufactured from June 2023 Maximum operating temperature 85°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2109328
Expiry date:
30/09/2026
Size:
See model
Marking:
Caleffi, PN and temperature on adhesive label on body. Size and flow arrow on body.
Installation Requirements:
R001
Model:
Chrome plated models: 525040: ½” BSP (M) (chrome plated). 525130: ⅜” BSP (M) x ⅜” BSP (F) captive nut, 525150: ¾” BSP (M) x ¾” BSP (F) captive nut. Natural brass finish models: 525041: ½” BSP (M). 525131: ⅜” BSP (M) x ⅜” BSP (F) captive nut, 525151: ¾” BSP (M) x ¾” BSP (F) captive nut, 525152: ¾” BSP (M) x ¾” BSP (F) captive nut.
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2103341

Range of automatic thermal balancing valves (DZR Brass) with non-rising spindle headwork, brass disc and EPDM seals. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
2103341
Expiry date:
31/03/2026
Size:
See model
Marking:
Caleffi, CR, flow arrow and PN rating on body.
Installation Requirements:
R001
Model:
½” / 15mm 206 Thermal Balancing Valves – BSS code 20520001 ¾” / 22mm 206 Thermal Balancing Valves – BSS code 20520012
Factor:
BSS Industrial
Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close Grove Park
Postcode
LE19 1SJ

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2111317

Non- verifiable double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a chrome plated DZR brass body with an integral insolation valve between the cartridges. For use with copper pipes to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2111317
Expiry date:
30/11/2026
Size:
15mm compression x ½”BSP(M)
Marking:
Caleffi logo, CR and flow arrow on body
Installation Requirements:
R001
Model:
303605 Models added April 2022 303615 – 15mm compression x 15mm compression 303606 - 15mm compression x ½”BSP(M)
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval


#2111319

Range of angled isolation ball valves incorporating brushed chrome plated DZR brass bodies, DZR brass ball (chrome plated), stainless steel strainer and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2111319
Expiry date:
30/11/2026
Size:
See model
Marking:
Airaga logo, Caleffi logo, CR, flow arrow & date of manufacture (YR/WK) on body.
Installation Requirements:
R001
Model:
1/2” BSP(M) x ¾” captive nut models: 49396 red lever 49397 blue lever ¾” BSP(M) x 1” captive nut models: 49398 red lever 49399 blue lever
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 4

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.