Water Coolers

Section Code 2420 : Drinking.

Back To Directory Sections

#2101330

Range of undercounter or deck mounted drinking water fountains which dispense ambient and/or chilled water. Flow is controlled via a solenoid valve and the products are activated via a push button or infa-red sensor . Maximum working pressure 7.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2101330
Expiry date:
31/01/2026
Size:
10mm copper tube
Marking:
Oasis on bottle filler. Model and other technical information on chiller unit.
Installation Requirements:
R001 R006 R150
Model:
Push button: PWSBFY MWSBFY PWSMSBFY MWSMSBFY MW8SBFY MWSM8SBFY Infa-red sensor: PWEBFY MWEBFY PWSMEBFY MWSMEBFY MW8EBFY MWSM8EBFY Code: PW = retrofit, MW = recessed, SM = surface mounted, EBF = IR activated, SBF button activated, S = non refrigerated, Y = 230v
Factor:
Oasis
Company Name
Oasis
Address
Bunree Industrial Estate Ballina Co. Mayo Republic of Ireland
Postcode
F26 D5RS

View All Listings by this Company

Print This Approval


#2006350

Water chiller unit for under counter installation, to be used in conjunction with an outlet tap arrangement or flow control device (not supplied as part of this approval). Maximum working pressure 7.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2006350
Expiry date:
30/06/2025
Size:
10mm copper tube
Marking:
Model and other technical information on body
Installation Requirements:
R001 R150
Model:
RLF8Y
Factor:
Oasis
Company Name
Oasis
Address
Bunree Industrial Estate Ballina Co. Mayo Republic of Ireland
Postcode
F26 D5RS

View All Listings by this Company

Print This Approval


#2209040

Range of floor or wall mounted water refill units. The flow is controlled via self-closing headworks with a dome type push button operating member. The outlet incorporates a bottle filling outlet with an aerator. The inlet incorporates an isolation valve, a drain valve and an approved double check valve suitable for backflow protection against fluid category 3. Maximum working pressure – 5.0 Bar, cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2209040
Expiry date:
30/09/2027
Size:
25mm compression fitting
Marking:
Our only world + WRS 01 on plate on body
Installation Requirements:
R001 R430 R511
Model:
WRS 01 (Available in both floor or wall mounted variants).
Factor:
Our Only World
Company Name
Our Only World
Address
35 Higher Tristram Polzeath Wadebridge Cornwall PL276TF

View All Listings by this Company

Print This Approval


#2311056

Range of undercounter water chillers with a stainless-steel cooling tank including a drain outlet. Maximum working pressure 3.0 Bar. Maximum operating temperature 38°C.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2311056
Expiry date:
30/11/2028
Size:
¼” NFTF (M).
Marking:
HYCO logo on outer casing. Hyco logo, voltage, batch number and other technical information on adhesive label on outer casing.
Installation Requirements:
R001 R150 R170 R511
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
SAPUC1, SAPUC2.
Factor:
Hyco Manufacturing Ltd.
Company Name
Hyco Manufacturing Ltd.
Address
Unit 1 & 2 Normandy Court, Express Way, West Yorkshire
Postcode
WF10 5NR
Phone
01924 225 200

View All Listings by this Company

Print This Approval


#240202711

‘G5 C’ command centre providing chilled (filtered) water via an electronically controlled tap (not supplied). Flow is controlled via a combination of solenoid valves and electronic pumps to the outlets. The products are supplied with a filter cartridge. The inlet to the command centre incorporates two approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum inlet supply pressure 5.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
240202711
Expiry date:
28/02/2029
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” captive nut end connection.
Marking:
Zip and HydroTap logo on body.
Installation Requirements:
R001 R009 R040 R150 R170
Proviso:
The product listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Command Centre UK HydroTap Mains models: H50011000UK - G5 C100 M.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.