Taps
Section Code 1750 : Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
Back To Directory Sections
WRAS Approval Number: #2109356
Range of bib taps incorporating brass bodies.
The S0311BL-1 and S0311BL-2 models incorporate an approved single check valve cartridge on the inlet and the outlet (hose union), however, the complete product has not been fully tested to demonstrate it provides backflow protection.
The S0311BL-1 and S0311BL-2 models also incorporate a drain port.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2109356
- Expiry date:
- 30/09/2026
- Size:
- BL-1 suffix models: ½” BSP (M),
BL-2 suffix models: ¾” BSP (M).
- Marking:
- S0310BL-1 and S0310BL-2 models:
SCE Technology logo (an eagle), size and EN1213 on body.
S0311BL-1 and S0311BL-2 models:
SCE Technology logo (an eagle), size and EN1213 on body.
- Installation Requirements:
- R001 R040
- Model:
-
S0310BL-1,
S0310BL-2,
S0311BL-1,
S0311BL-2.
- Manufacturer:
- SCE Technology (Ningbo) Co.,Ltd.
Company Name
SCE Technology (Ningbo) Co.,Ltd.
Address
No.32 Yuanqu Road
Cha Lu Industrial Zone
Ninghai
Zhejiang
Country
China
View All Listings by this Company
WRAS Approval Number: #2109379
Range of bib taps incorporating brass bodies.
The BTHUCV1/2 and BTHUCV3/4 models incorporate an approved single check valve cartridge on the inlet and the outlet (hose union), however, the complete product has not been fully tested to demonstrate it provides backflow protection.
The BTHUCV1/2 and BTHUCV3/4 models also incorporate a drain port.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2109379
- Expiry date:
- 30/09/2026
- Size:
- BTHU1/2 & BTHUCV1/2 : ½” BSP (M),
BTHU3/4 & BTHUCV3/4: ¾” BSP (M).
- Marking:
- CUB & SIZE ON BODY
- Installation Requirements:
- R001 R040
- Model:
-
BTHU1/2, BTHU3/4, BTHUCV1/2 & BTHUCV3/4 BIB TAPS
- Factor:
- Cubralco Ltd.
Company Name
Cubralco Ltd.
Address
Ricketts Close,
Firs Industrial Estate,
Kidderminster
Postcode
DY11 7QN
Country
Worcestershire
View All Listings by this Company
WRAS Approval Number: #2110068
Range of bib taps with (chrome plated) brass bodies, brass ball spherical valve with PTFE seals and a single lever operating member.
The spout outlet incorporates a hose union spigot connection.
Maximum working pressure 10.0 Bar Maximum operating temperature 85°C
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2110068
- Expiry date:
- 31/10/2026
- Size:
- See model
- Marking:
- PEX (PEX is short for Plumbex a brand of Vado) on body and operating lever.
- Installation Requirements:
- R001
- Model:
-
PEX-708 ½” BSP (M) & PEX-708 ¾” BSP (M)
- Manufacturer:
- Vado
Company Name
Vado
Address
Cheddar Business Park
Wedmore Road
Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466
View All Listings by this Company
WRAS Approval Number: #2104345
Range of bib taps incorporating either brass or DZR brass bodies.
The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2104345
- Expiry date:
- 30/04/2026
- Size:
- Please see model
- Marking:
- TPK, SIZE & DATE OF MANUFACTURE MM/YY ON BODY
- Installation Requirements:
- R001 R040
- Model:
-
799299: ½” BSP (M).
.
- Factor:
- Travis Perkins Group Plc.
Company Name
Travis Perkins Group Plc.
Address
Lodge Way House
Lodge Way
Harlestone
Northapmton
Postcode
NN5 7AL
View All Listings by this Company
WRAS Approval Number: #2207352
Range of hose union, spherical valve type bib taps with (nickel plated) brass bodies and chrome plated brass ball. The outlet incporates a plastic flow straightener
Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
- Section:
- 1750 Taps
- Section Subtitle:
- Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing.
b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
- WRAS Approval Number:
- 2207352
- Expiry date:
- 31/07/2027
- Size:
- see model
- Marking:
- Flowflex logo on body
- Installation Requirements:
- R001 R040
- Model:
-
L480.2: ½” BSP (M).
L480.3: ¾” BSP (M).
L480.4: 1” BSP (M).
- Factor:
- Flowflex Components Ltd.
Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works
Dew Pond Lane
Tongue Lane Industrial Estate
Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211
Fax: 01298 72362
Telex: 666482
General Email
daniel.jones@fowflex.com
View All Listings by this Company
Back To Directory Sections Page 3 of 4